FA-GSW-SNMP-MIB DEFINITIONS ::= BEGIN


IMPORTS
	MODULE-IDENTITY, OBJECT-TYPE, Counter32, Counter64, Gauge32,
	Integer32, TimeTicks, mib-2, enterprises, IpAddress,
	NOTIFICATION-TYPE                        FROM SNMPv2-SMI
	TEXTUAL-CONVENTION, DisplayString,  MacAddress,	PhysAddress, TruthValue, RowStatus,          

	TimeStamp, AutonomousType, TestAndIncr, TruthValue   FROM SNMPv2-TC
	MODULE-COMPLIANCE, OBJECT-GROUP,
	NOTIFICATION-GROUP                       FROM SNMPv2-CONF;
	
ctc  MODULE-IDENTITY 
    LAST-UPDATED  "201308060000Z"
    ORGANIZATION  "CTC Union Technologies Co., Ltd."
    CONTACT-INFO
        "

         Postal:  8F, No.60, ZhouZi Street, Nei-Hu, Taipei 114, Taiwan

         Phone:  +886-2-2659-1021
         FAX:    +886-2-2672-5211

         Web:    www.ctcu.com

         Email:  support@ctcu.com"
            	
     --REVISION  "201412220000Z"
     --	DESCRIPTION
     --		" 1.022	- support 4e1/et100 management
     			--	- support 4e1, 5e1, 8e1, 16e1 new type Vlan management
     			--	- eoe1g remote device status added"    

    DESCRIPTION
        "FRM220A GSW MIB FILEs V1.021" 
    
     REVISION  "201308060000Z"
		DESCRIPTION
            " 1.021 - Modify FRM220A fiber D/D information:Fiber Type.
            "
    
    REVISION  "201307180000Z"
		DESCRIPTION
            " 1.020 - Modify dynamic FRM220A-1000EAS/X Static 1Q VLAN talbe.
            "
   
    REVISION  "201307170000Z"
		DESCRIPTION
            " 1.019  - Added GSW/SNMP MAC Address conunter.
                     - Added GSW/SNMP reset device oid.
                     - Modify FRM220A-1000EAS/X Static 1Q VLAN talbe 16 to 64.
            "

    REVISION  "201305150000Z"
		DESCRIPTION
            " 1.018  - fixed the bugs of 1002ES CARD."
      
    REVISION  "201304090000Z"
		DESCRIPTION
            " 1.017  - support 1002ES CARD."
        
    REVISION  "201304010000Z"
		DESCRIPTION
            " 1.016  - fixed the MIB of switch function."
        
    REVISION  "201302270000Z"
		DESCRIPTION
            " 1.015  - support LACP and fixed the MIB of switch function."

    REVISION  "201301040000Z"
		DESCRIPTION
            " 1.014  - support new switch functions: Port, Authentication, Aggregation
            								STP, Mac Table, VLAN, QoS, Mirror"
    
    REVISION  "201208070000Z"
		DESCRIPTION
            " 1.013  - fix 1000eas/x bug"
        
    REVISION  "201206210000Z"
		DESCRIPTION
            " 1.012  - fix 10G-SXX, 10G-SX, 10G-XX bug"
        
    REVISION  "201204270000Z"
		DESCRIPTION
            " 1.011  - update 1000EAS/X CARD Back Plane Information."
        
    REVISION  "201203270000Z"
		DESCRIPTION
            " 1.010  - support 10G-SXX, 10G-SX, 10G-XX CARDs."
        
    REVISION  "201202230000Z"
		DESCRIPTION
            " 1.009  - support FSW-103 CARD."
        
    REVISION  "201112090000Z"
		DESCRIPTION
            " 1.008  - update for EMS."
  
    REVISION  "201111030000Z"
		DESCRIPTION
            " 1.007  - update for EMS."
     
    REVISION  "201109050000Z"
		DESCRIPTION
            " 1.006  - update 1000EAS/X CARD VLAN and System Information."
        
    REVISION  "201108300000Z"
		DESCRIPTION
            " 1.005  - support 1000EAS/X CARD VLAN and System Information."
        
    REVISION  "201107140000Z"
		DESCRIPTION
            " 1.004  - support 1000EAS/X CARD."
        
    REVISION  "201012280000Z"
		DESCRIPTION
            " 1.002  - support E1/DATA CARD."

    REVISION  "201009020000Z"
		DESCRIPTION
            " 1.001  - support Eoe1 CARD."

    REVISION  "201004110000Z"
		DESCRIPTION
            " 1.000  - support GSW and nE1 CARD."
    ::= { enterprises 4756 }

faGswSnmp OBJECT IDENTIFIER ::= { ctc 42 } 

-- GSW System:
faGswSnmpProject OBJECT IDENTIFIER ::= { faGswSnmp 1 }

faGswSnmpSystem     OBJECT IDENTIFIER ::= { faGswSnmpProject 1 }
faGswSnmpPorts      OBJECT IDENTIFIER ::= { faGswSnmpProject 2 }
faGswSnmpAuth       OBJECT IDENTIFIER ::= { faGswSnmpProject 3 }
faGswSnmpAggr       OBJECT IDENTIFIER ::= { faGswSnmpProject 4 }
faGswSnmpSTP        OBJECT IDENTIFIER ::= { faGswSnmpProject 5 }
faGswSnmpMac        OBJECT IDENTIFIER ::= { faGswSnmpProject 6 }
faGswSnmpVLAN       OBJECT IDENTIFIER ::= { faGswSnmpProject 7 }
faGswSnmpQoS        OBJECT IDENTIFIER ::= { faGswSnmpProject 8 }
faGswSnmpMirror     OBJECT IDENTIFIER ::= { faGswSnmpProject 9 }
faGswSnmpTraps      OBJECT IDENTIFIER ::= { faGswSnmpProject 10 }

-- System
    chassisID  OBJECT-TYPE
        SYNTAX  Integer32 (0..9)
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "This chassis ID."
        ::= { faGswSnmpSystem 1 }

    stackIn  OBJECT-TYPE
        SYNTAX  INTEGER {
            no(1),
            yes(2)
        }
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "Chassis is stacked:
            1:No
            2:Yes"
        ::= { faGswSnmpSystem 2 }

    stackInCounter  OBJECT-TYPE
        SYNTAX  Integer32 (1..10)
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "Number of slave chassis stacked."
        ::= { faGswSnmpSystem 3 }

    alarm1Status  OBJECT-TYPE
        SYNTAX  INTEGER {
            inactive(1),
            active(2)
        }
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "Alarm 1 status:
            1:Inactive
            2:Active"
        ::= { faGswSnmpSystem 4 }

    alarm2Status  OBJECT-TYPE
        SYNTAX  INTEGER {
            inactive(1),
            active(2)
        }
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "Alarm 2 status:
            1:Inactive
            2:Active"
        ::= { faGswSnmpSystem 5 }

    alarm1Mode  OBJECT-TYPE
        SYNTAX  INTEGER {
            disable(1),
            byPower(2),
            byUserDefine1(3),
            byUserDefine2(4)
        }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "Alarm 1 mode:
            1:Disable
            2:Active if any power status is changed (default)
            3:Active if any item of user definition#1 is met
            4:Active if any item of user definition#2 is met"
        ::= { faGswSnmpSystem 6 }

    alarm2Mode  OBJECT-TYPE
        SYNTAX  INTEGER {
            disable(1),
            byFan(2),
            byUserDefine1(3),
            byUserDefine2(4)
        }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "Alarm 1 mode:
            1:Disable
            2:Active if any fan status is changed (default)
            3:Active if any item of user definition#1 is met
            4:Active if any item of user definition#2 is met"
        ::= { faGswSnmpSystem 7 }
   
   resetDevice  OBJECT-TYPE
        SYNTAX  INTEGER {
            no(1),
            yes(2)        }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "Warm Reset:
            Are you sure you want to perform a Warm Restart?
            1. No
            2. Yes "
        ::= { faGswSnmpSystem 8 }

   		 
-- User Define Alarm Table
    userDefineAlarmTable  OBJECT-TYPE
        SYNTAX  SEQUENCE OF UserDefineAlarmEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "A list of user definition entries."
        ::= { faGswSnmpSystem 20 }

    userDefineAlarmEntry OBJECT-TYPE
        SYNTAX  UserDefineAlarmEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "An entry containing management information applicable to
            a particular chassis."
        INDEX { userDefineIndex }
        ::= { userDefineAlarmTable 1 }

    UserDefineAlarmEntry ::=
        SEQUENCE {
            userDefineIndex           INTEGER,
            userDefinePower1          INTEGER,
            userDefinePower2          INTEGER,
            userDefineFan1            INTEGER,
            userDefineFan2            INTEGER,
            userDefineUtpLocal        INTEGER,
            userDefineFxLocal         INTEGER,
            userDefineFefLocal        INTEGER,
            userDefineRemotePwrLocal  INTEGER,
            userDefineUtpRemote       INTEGER,
            userDefineFxRemote        INTEGER
        }

        userDefineIndex  OBJECT-TYPE
            SYNTAX  INTEGER {
                userDefine1(1),
                userDefine2(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "User definition index for alarn:
                1:User definition 1
                2:User definition 2"
            ::= { userDefineAlarmEntry 1 }

        userDefinePower1  OBJECT-TYPE
            SYNTAX  INTEGER {
                noDefine(1),
                defineAlarm(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "User definition for Alarm:
                1:No defined
                2:Alarm is active when power 1 status is changed"
            ::= { userDefineAlarmEntry 2 }

        userDefinePower2  OBJECT-TYPE
            SYNTAX  INTEGER {
                noDefine(1),
                defineAlarm(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "User definition for Alarm:
                1:No defined
                2:Alarm is active when power 2 status is changed"
            ::= { userDefineAlarmEntry 3 }

        userDefineFan1  OBJECT-TYPE
            SYNTAX  INTEGER {
                noDefine(1),
                defineAlarm(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "User definition for Alarm:
                1:No defined
                2:Alarm is active when fan 1 status is changed"
            ::= { userDefineAlarmEntry 4 }

        userDefineFan2  OBJECT-TYPE
            SYNTAX  INTEGER {
                noDefine(1),
                defineAlarm(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "User definition for Alarm:
                1:No defined
                2:Alarm is active when fan 2 status is changed"
            ::= { userDefineAlarmEntry 5 }

        userDefineUtpLocal  OBJECT-TYPE
            SYNTAX  INTEGER {
                noDefine(1),
                defineAlarm(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "User definition for Alarm:
                1:No defined
                2:Alarm is active when local card's UTP status is changed"
            ::= { userDefineAlarmEntry 6 }

        userDefineFxLocal  OBJECT-TYPE
            SYNTAX  INTEGER {
                noDefine(1),
                defineAlarm(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "User definition for Alarm:
                1:No defined
                2:Alarm is active when local card's FX status is changed"
            ::= { userDefineAlarmEntry 7 }

        userDefineFefLocal  OBJECT-TYPE
            SYNTAX  INTEGER {
                noDefine(1),
                defineAlarm(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "User definition for Alarm:
                1:No defined
                2:Alarm is active when local card's FEF detection is changed"
            ::= { userDefineAlarmEntry 8 }

        userDefineRemotePwrLocal  OBJECT-TYPE
            SYNTAX  INTEGER {
                noDefine(1),
                defineAlarm(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "User definition for Alarm:
                1:No defined
                2:Alarm is active when local detect remote's power status is changed"
            ::= { userDefineAlarmEntry 9 }

        userDefineUtpRemote  OBJECT-TYPE
            SYNTAX  INTEGER {
                noDefine(1),
                defineAlarm(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "User definition for Alarm:
                1:No defined
                2:Alarm is active when remote card's UTP status is changed"
            ::= { userDefineAlarmEntry 10 }

        userDefineFxRemote  OBJECT-TYPE
            SYNTAX  INTEGER {
                noDefine(1),
                defineAlarm(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "User definition for Alarm:
                1:No defined
                2:Alarm is active when remote card's FX status is changed"
            ::= { userDefineAlarmEntry 11 }


-- Chassis Table
    chassisInfoTable  OBJECT-TYPE
        SYNTAX  SEQUENCE OF ChassisInfoEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "A list of chassis information entries."
        ::= { faGswSnmpSystem 30 }

    chassisInfoEntry OBJECT-TYPE
        SYNTAX  ChassisInfoEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "An entry containing management information applicable to
            a particular chassis."
        INDEX { chassisChassisIndex }
        ::= { chassisInfoTable 1 }

    ChassisInfoEntry ::=
        SEQUENCE {
            chassisChassisIndex  Integer32,
            snmpHWVer            DisplayString,
            snmpFWVer            DisplayString,
            snmpEPLDVer          DisplayString,
            snmpFPGAVer          DisplayString,
            macAddress           MacAddress,
            softWareDate         DisplayString,
            power1Type           INTEGER,
            power1Status         INTEGER,
            power2Type           INTEGER,
            power2Status         INTEGER,
            fan1RPM              Integer32,
            fan1Status           INTEGER,
            fan2RPM              Integer32,
            fan2Status           INTEGER,
            cpuTemperature       Integer32,
            cpuTempStatus        INTEGER,
            boardTemperature     Integer32,
            boardTempStatus      INTEGER
        }

        chassisChassisIndex  OBJECT-TYPE
            SYNTAX  Integer32 (0..9)
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "Chassis ID"
            ::= { chassisInfoEntry 1 }

        snmpHWVer  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "SNMP hardware version x.xxx"
            ::= { chassisInfoEntry 2 }

        snmpFWVer OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "SNMP firmware version x.xxx"
            ::= { chassisInfoEntry 3 }

        snmpEPLDVer  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "SNMP EPLD version x.xxx"
            ::= { chassisInfoEntry 4 }

        snmpFPGAVer OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "SNMP FPGA version x.xxx"
            ::= { chassisInfoEntry 5 }

        macAddress  OBJECT-TYPE
            SYNTAX  MacAddress
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "Ethernet Mac address"
            ::= { chassisInfoEntry 6 }

        softWareDate  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "SNMP software compiled date."
            ::= { chassisInfoEntry 7 }

        power1Type  OBJECT-TYPE
            SYNTAX  INTEGER {
                empty(1),
                ac90To250V(2),
                dc36To72V(3),
                dc18To36V(4)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "Power 1 type:
                1:Empty
                2:AC90-250V
                3:DC36-72V
                4:DC18-36V"
            ::= { chassisInfoEntry 8 }

        power1Status  OBJECT-TYPE
            SYNTAX  INTEGER {
                ok(1),
                fail(2),
                none(3)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "Power 1 status:
                1:OK
                2:Fail"
            ::= { chassisInfoEntry 9 }

        power2Type  OBJECT-TYPE
            SYNTAX  INTEGER {
                empty(1),
                ac90To250V(2),
                dc36To72V(3),
                dc18To36V(4)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "Power 2 type:
                1:Empty
                2:AC90-250V
                3:DC36-72V
                4:DC18-36V"
            ::= { chassisInfoEntry 10 }

        power2Status  OBJECT-TYPE
            SYNTAX  INTEGER {
                ok(1),
                fail(2),
                none(3)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "Power 2 status:
                1:OK
                2:Fail"
            ::= { chassisInfoEntry 11 }

        fan1RPM  OBJECT-TYPE
            SYNTAX  Integer32 (0..9999)
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "Fan 1 RPM"
            ::= { chassisInfoEntry 12 }

        fan1Status  OBJECT-TYPE
            SYNTAX  INTEGER {
                ok(1),
                fail(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "Fan 1 status:
                1:OK
                2:Fail"
            ::= { chassisInfoEntry 13 }

        fan2RPM  OBJECT-TYPE
            SYNTAX  Integer32 (0..9999)
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "Fan 2 RPM"
            ::= { chassisInfoEntry 14 }

        fan2Status  OBJECT-TYPE
            SYNTAX  INTEGER {
                ok(1),
                fail(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "Fan 2 status:
                1:OK
                2:Fail"
            ::= { chassisInfoEntry 15 }

        cpuTemperature  OBJECT-TYPE
            SYNTAX  Integer32 (0..255)
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "CPU temperature in degree C."
            ::= { chassisInfoEntry 16 }

        cpuTempStatus  OBJECT-TYPE
            SYNTAX  INTEGER {
                ok(1),
                fail(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "CPU temperature status:
                1:OK
                2:Fail, over 85 degree C"
            ::= { chassisInfoEntry 17 }

        boardTemperature  OBJECT-TYPE
            SYNTAX  Integer32 (0..255)
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "Board temperature in degree C."
            ::= { chassisInfoEntry 18 }

        boardTempStatus  OBJECT-TYPE
            SYNTAX  INTEGER {
                ok(1),
                fail(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "Board temperature status:
                1:OK
                2:Fail, over 55 degree C"
            ::= { chassisInfoEntry 19 }

-- Slot table
    slotInfoTable  OBJECT-TYPE
        SYNTAX  SEQUENCE OF SlotInfoEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "A list of slot information entries."
        ::= { faGswSnmpSystem 40 }

    slotInfoEntry  OBJECT-TYPE
        SYNTAX  SlotInfoEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "An entry containing management information applicable to a
            particular slot."
        INDEX  { slotChassisIndex, slotSlotIndex, slotSideIndex }
        ::= { slotInfoTable 1 }

    SlotInfoEntry ::=
        SEQUENCE {
            slotChassisIndex     Integer32,
            slotSlotIndex        Integer32,
            slotSideIndex        INTEGER,
            cardType             INTEGER,
            cardName             DisplayString
        }

        slotChassisIndex  OBJECT-TYPE
            SYNTAX  Integer32 (0..9)
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "A unique value for each chassis.
                It starts from 0 to 9 contiguously."
            ::= { slotInfoEntry 1 }

        slotSlotIndex  OBJECT-TYPE
            SYNTAX  Integer32 (1..20)
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "A unique value for each slot.
                It starts from 1 to 20 contiguously."
            ::= { slotInfoEntry 2 }

        slotSideIndex OBJECT-TYPE
            SYNTAX  INTEGER {
                local(1),
                remoteA(2),
                remoteB(3),
                remoteC(4),
                remoteD(5)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "A unique value for each card. It is the card location:
                1:Local area
                2:Remote A or Remote area
                3:Remote B area
                4:Remote C area
                5:Remote D area"
            ::= { slotInfoEntry 3 }

        cardType  OBJECT-TYPE
            SYNTAX  INTEGER {
                empty(1),
                unknown(2),
                nmc(3),
                f100I(1600),
                fmc100I(1700),
                fxoFxs(1800),
                serial(1900),
                dataPort(2000),
                f100A(2100),
                f100As(2101),
                f1000Eas(2200),
                f1000Eas2F(2201),
                f1000Eas1(2202),
                f1000Ea2F(2203),
                f1000Ea1(2204),
                f155Ms(2300),
                e1T1(2400),
                f1000Eds(2500),
                f100I2(2600),
                f3R2dot7G(2800),
                f1000Ts(2900),
                e1Data(3000),
                e1Et100T(3100),
                fom04(3200),
                fmux04E(3300),
                f10Gsxx(3900),
                f10Gsx(3901),
                f10Gxx(3902),
                fFSW103(4200),
				f1000EasX(4300),
				f1002ES(4600),
				fa4E1Et100T(7400),
				fa4E1Et100S(7500),
                fa5E1Et100T(6400),
                fa5E1Et100S(6500),
                fa8E1Et100T(6600),
                fa8E1Et100S(6700),
                fa16E1Et100T(6800),
                fa16E1Et100S(6900),
                faeoe1g(7000)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "card type:
                1:Empty
                2:Unknown
                3:NMC
                1600:10/100I
                1700:FMC-10/100I
                1800:FXO/FXS
                1900:SERIAL
                2000:DATAPORT
                2100:10/100A
                2101:10/100AS
                2200:1000EAS
                2201:1000EAS-2F
                2202:1000EAS-1
                2203:1000EA-2F
                2204:1000EA-1
                2300:155MS
                2400:E1/T1
                2500:1000EDS
                2600:100I-2
                2700:10G-SXX
                2701:10G-SX
                2702:10G-XX
                2800:3R2.7G
                2900:1000TS
                3000:E1/DATA
                3100:E1/ET100T
                3200:FOM04
                3300:FMUX04E
                4200:FSW103
                4300:1000EAS/X
                4600:1002ES
                7400:4E1-ET100T
                7500:4E1-ET100S
                6400:5E1-ET100T
                6500:5E1-ET100S
                6600:8E1-ET100T
                6700:8E1-ET100S
                6800:16E1-ET100T
                6900:16E1-ET100S
                7000:EOE1/G"
            ::= { slotInfoEntry 4 }

        cardName  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "Card product name."
            ::= { slotInfoEntry 5 }

-- Switch Ports
    gswPortsTable  OBJECT-TYPE
        SYNTAX  SEQUENCE OF GswPortsEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "A list of port information entries."
        ::= { faGswSnmpPorts 1 }

    gswPortsEntry  OBJECT-TYPE
        SYNTAX  GswPortsEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "An entry containing management information applicable to a
            particular port."
        INDEX  { gswChassisIndex, gswPortIndex }
        ::= { gswPortsTable 1 }

    GswPortsEntry ::=
        SEQUENCE {
            gswChassisIndex 	 Integer32,
            gswPortIndex         Integer32,
            portsLink			 INTEGER,
            portsSpeedConf	     INTEGER,
            portsSpeedStatus	 INTEGER,
            portsFlowCtrl		 INTEGER,
            portsRxPause         INTEGER,
            portsTxPause         INTEGER,
            portsMaxFrame	     Counter32,
            portsExceCol 		 INTEGER,
            portsPwrCtrl         INTEGER
        }

        gswChassisIndex  OBJECT-TYPE
            SYNTAX  Integer32 (0..9)
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "A unique value for each chassis.
                It starts from 0 to 9 contiguously."
            ::= { gswPortsEntry 1 }

        gswPortIndex  OBJECT-TYPE
            SYNTAX  Integer32 (1..28)
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "A unique value for each port.
                It starts from 1 to 28 contiguously."
            ::= { gswPortsEntry 2 }
            
        portsLink OBJECT-TYPE
            SYNTAX  INTEGER {
                down(1),
                up(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "It is the switch port link status:
                1:down
                2:up"
            ::= { gswPortsEntry 3 }

		portsSpeedConf OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                auto(2),
                f2-5gfdx(3),
                f1gfdx(4),
                f100fdx(5),
                f100hdx(6),
                f10fdx(7),
                f10hdx(8)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "It is the configuration of port speed:
                1:disable
                2:auto
                3:2.5Gbps Full Duplex
                4:1Gbps Full Duplex
                5:100Mbps Full Duplex
                6:100Mbps Half Duplex
                7:10Mbps Full Duplex
                8:10Mbps Half Duplex"
            ::= { gswPortsEntry 4 }
            
		portsSpeedStatus OBJECT-TYPE
            SYNTAX  INTEGER {
                down(1),
                f2-5gfdx(2),
                f1gfdx(3),
                f100fdx(4),
                f100hdx(5),
                f10fdx(6),
                f10hdx(7)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "It is the status of port speed:
                1:down
                2:2.5Gbps Full Duplex
                3:1Gbps Full Duplex
                4:100Mbps Full Duplex
                5:100Mbps Half Duplex
                6:10Mbps Full Duplex
                7:10Mbps Half Duplex"
            ::= { gswPortsEntry 5 }
            
         portsFlowCtrl OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "FRM220A, switch port flow control:
                1:disable
                2:enable"
            ::= { gswPortsEntry 6 }
            
         portsRxPause OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "FRM220A, switch port rx puase:
                1:no
                2:yes"
            ::= { gswPortsEntry 7 }

         portsTxPause OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "FRM220A, switch port tx puase:
                1:no
                2:yes"
            ::= { gswPortsEntry 8 }

         portsMaxFrame  OBJECT-TYPE
            SYNTAX  Counter32
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                " FRM220A, maximum frame size of the switch port"
            ::= { gswPortsEntry 9 }
            
         portsExceCol OBJECT-TYPE
            SYNTAX  INTEGER {
                discard(1),
                restart(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "FRM220A, the excessive collision mode of switch port :
                1:discard
                2:restart"
            ::= { gswPortsEntry 10 }
            
         portsPwrCtrl OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                actiphy(2),
                perefectreach(3),
                enable(4)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "FRM220A, the power control of switch port:
                1:disable
                2:ActiPhy
                3:PerefectReach
                4:enable"
            ::= { gswPortsEntry 11 }
            
    gswTrafficTable  OBJECT-TYPE
        SYNTAX  SEQUENCE OF GswTrafficEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "A list of port traffic information entries."
        ::= { faGswSnmpPorts 2 }

    gswTrafficEntry  OBJECT-TYPE
        SYNTAX  GswTrafficEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "An entry containing traffic information applicable to a
            particular port."
        INDEX  { gswChassisIndex, gswPortIndex }
        ::= { gswTrafficTable 1 }

    GswTrafficEntry ::=
        SEQUENCE {
            portsPacketsRx			 	DisplayString,
            portsPacketsTx			 	DisplayString,
            portsBytesRx			 	DisplayString,
            portsBytesTx			 	DisplayString,
            portsErrorsRx			 	DisplayString,
            portsErrorsTx			 	DisplayString,
            portsDropsRx			 	DisplayString,
            portsDropsTx			 	DisplayString,
            portsFilterRx			 	DisplayString
        }
            
		portsPacketsRx OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS read-only  
			STATUS  current
			DESCRIPTION
				" A unique value for each port, received packets counter "
			::= { gswTrafficEntry 1 }

		portsPacketsTx OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS read-only  
			STATUS  current
			DESCRIPTION
				" A unique value for each port, transmitted packets counter "
			::= { gswTrafficEntry 2 }
               
 		portsBytesRx OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS read-only  
			STATUS  current
			DESCRIPTION
				" A unique value for each port, received bytes counter "
			::= { gswTrafficEntry 3 }

		portsBytesTx OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS read-only  
			STATUS  current
			DESCRIPTION
				" A unique value for each port, transmitted bytes counter "
			::= { gswTrafficEntry 4 }
			
 		portsErrorsRx OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS read-only  
			STATUS  current
			DESCRIPTION
				" A unique value for each port, received errors counter "
			::= { gswTrafficEntry 5 }

		portsErrorsTx OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS read-only  
			STATUS  current
			DESCRIPTION
				" A unique value for each port, transmitted errors counter "
			::= { gswTrafficEntry 6 }

 		portsDropsRx OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS read-only  
			STATUS  current
			DESCRIPTION
				" A unique value for each port, received drops counter "
			::= { gswTrafficEntry 7 }

		portsDropsTx OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS read-only  
			STATUS  current
			DESCRIPTION
				" A unique value for each port, transmitted drops counter "
			::= { gswTrafficEntry 8 }


        portsFilterRx OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS read-only  
			STATUS  current
			DESCRIPTION
				" A unique value for each port, received packets which is filtered "
			::= { gswTrafficEntry 9 }

 		gswPortsClrCnt OBJECT-TYPE
			SYNTAX  INTEGER {
						noaction(1),
						action(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" It will clear all the counter of each port(trigger)
				1:no action
				2:action"
			::= { faGswSnmpPorts 3 }
			
    gswSFPTable  OBJECT-TYPE
        SYNTAX  SEQUENCE OF GswSFPEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "A list of port traffic information entries."
        ::= { faGswSnmpPorts 4 }

    gswSFPEntry  OBJECT-TYPE
        SYNTAX  GswSFPEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "An entry containing SFP information applicable to a
            particular port."
        INDEX  { gswChassisIndex, portsSFPIndex }
        ::= { gswSFPTable 1 }

    GswSFPEntry ::=
        SEQUENCE {
            portsSFPIndex		    Integer32,
            portsVendor			 	DisplayString,
            portsPartNo			 	DisplayString,
            portsFiberType			INTEGER,
            portsWaveLen			DisplayString,
            portsWaveLen2			DisplayString,
            portsLinkLen			DisplayString,
            portsDDStatus			INTEGER,
            portsDDTxPWR            DisplayString,
            portsDDRxPWR            DisplayString,
            portsDDRxSens			DisplayString,
            portsDDTemp				DisplayString       
           }

        portsSFPIndex  OBJECT-TYPE
            SYNTAX  Integer32 (25..28)
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "A unique value for each port.
                It starts from 25 to 28 contiguously."
            ::= { gswSFPEntry 1 }
            			
		portsVendor OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A fiber D/D information:Vendor name"
			::= { gswSFPEntry 2 }

		portsPartNo OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A fiber D/D information:Vendor part number"
			::= { gswSFPEntry 3 }

		portsFiberType OBJECT-TYPE
			SYNTAX  INTEGER{
						single(1), 
						multi(2),
						none(3)
					  }
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A fiber D/D information:Fiber Type"
			::= { gswSFPEntry 4 }
			
		portsWaveLen OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A fiber D/D information:Wave length"
			::= { gswSFPEntry 5 }

		portsWaveLen2 OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
			" FRM220A fiber D/D information:Wave length 2"
			::= { gswSFPEntry 6 }

		portsLinkLen OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A fiber D/D information:
				Link length"
			::= { gswSFPEntry 7 }   
		
		portsDDStatus OBJECT-TYPE
			SYNTAX  INTEGER{
						no(1),
						yes(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A fiber D/D information:Status Support"
			::= { gswSFPEntry 8 }
			
		portsDDTxPWR OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A fiber D/D information:Tx power"
			::= { gswSFPEntry 9 }

		portsDDRxPWR OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A fiber D/D information:Rx power"
			::= { gswSFPEntry 10 }
			
		portsDDRxSens OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A fiber D/D information:Rx Sensitivity"
			::= { gswSFPEntry 11 }
			
		portsDDTemp OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A fiber D/D information:Temperature in degree C"
			::= { gswSFPEntry 12 } 
					
--  Authentication
    gswTelnetAuth  OBJECT-TYPE
        SYNTAX  INTEGER {
        	none(1),
            local(2),
            radius(3)
        }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "Telnet Authentication Method:
            1:none
            2:local
            3:RADIUS"
        ::= { faGswSnmpAuth 1 }
        
    gswWebAuth  OBJECT-TYPE
        SYNTAX  INTEGER {
        	none(1),
            local(2),
            radius(3)
        }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "Web Authentication Method:
            1:none
            2:local
            3:RADIUS"
        ::= { faGswSnmpAuth 2 }
        
     gswTelnetFallback  OBJECT-TYPE
        SYNTAX  INTEGER {
        	disable(1),
            enable(2)
        }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "Telnet Fallback Method:
            1:disable          
            2:enable"
        ::= { faGswSnmpAuth 3 }

      gswWebFallback  OBJECT-TYPE
        SYNTAX  INTEGER {
        	disable(1),
            enable(2)
        }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "Web Fallback Method:
            1:disable          
            2:enable"
        ::= { faGswSnmpAuth 4 }
        
      gswServTimeout  OBJECT-TYPE
      	SYNTAX  Counter32
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
           "The common server timeout, 
            which can be set to a number between 3 and 3600 seconds:"
         ::= { faGswSnmpAuth 5 }

      gswDeadTime  OBJECT-TYPE
      	SYNTAX  Counter32
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
           "The dead time, 
            which can be set to a number between 0 and 3600 seconds:"
         ::= { faGswSnmpAuth 6 }
         
    gswAuthTable  OBJECT-TYPE
        SYNTAX  SEQUENCE OF GswAuthEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "A list of authentication information entries."
        ::= { faGswSnmpAuth 7 }

    gswAuthEntry  OBJECT-TYPE
        SYNTAX  GswAuthEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "An entry containing authentication information."
        INDEX  { authChassisIndex, authServIndex }
        ::= { gswAuthTable 1 }
        

    GswAuthEntry ::=
        SEQUENCE {
            authChassisIndex 	 Integer32,
            authServIndex        Integer32,
            authEnable			 INTEGER,
            authIPAddr		     DisplayString,
            authPort			 Counter32,
            authSecret			 DisplayString,
            authRxAccepts        Counter32,
            authRxRejects        Counter32,
            authRxChallenges     Counter32,
            authRxMalfor	     Counter32,
            authRxBadAuth        Counter32,
            authRxUnknown        Counter32,
            authRxDrops          Counter32,
            authTxRequests       Counter32,
            authTxRetran         Counter32,
            authTxPending        Counter32,
            authTxTimeouts       Counter32,
            authClrCnt           INTEGER
        }

        authChassisIndex  OBJECT-TYPE
            SYNTAX  Integer32 (0..9)
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "A unique value for each chassis.
                It starts from 0 to 9 contiguously."
            ::= { gswAuthEntry 1 }

        authServIndex  OBJECT-TYPE
            SYNTAX  Integer32 (1..5)
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "A unique value for each authentication server.
                It starts from 1 to 5 contiguously."
            ::= { gswAuthEntry 2 }
            
        authEnable OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "Enable the RADIUS Authentication Server.
                The secret must not be empty when you want to enable this value
                1:disable
                2:enable"
            ::= { gswAuthEntry 3 }

 		authIPAddr OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS read-write  
			STATUS  current
			DESCRIPTION
				"The IP address of the RADIUS Authentication Server"
			::= { gswAuthEntry 4 }
           
        authPort  OBJECT-TYPE
            SYNTAX  Counter32
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "The UDP port to use on the RADIUS Authentication Server."
            ::= { gswAuthEntry 5 }
      
  		authSecret OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS read-write  
			STATUS  current
			DESCRIPTION
				"The secret - up to 29 characters long - 
				shared between the RADIUS Authentication Server and the switch."
			::= { gswAuthEntry 6 }
			
         authRxAccepts  OBJECT-TYPE
            SYNTAX  Counter32
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "The number of RADIUS Access-Accept packets (valid or invalid) received from the server."
            ::= { gswAuthEntry 7 }

         authRxRejects  OBJECT-TYPE
            SYNTAX  Counter32
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "The number of RADIUS Access-Reject packets (valid or invalid) received from the server."
            ::= { gswAuthEntry 8 }
            
          authRxChallenges  OBJECT-TYPE
            SYNTAX  Counter32
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "The number of RADIUS Access-Challenge packets (valid or invalid) received from the server. "
            ::= { gswAuthEntry 9 }
     
          authRxMalfor  OBJECT-TYPE
            SYNTAX  Counter32
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "The number of malformed RADIUS Access-Response packets received from the server. 
                Malformed packets include packets with an invalid length. 
                Bad authenticators or Message Authenticator attributes or 
                unknown types are not included as malformed access responses. "
            ::= { gswAuthEntry 10 } 
            
          authRxBadAuth  OBJECT-TYPE
            SYNTAX  Counter32
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "The number of RADIUS Access-Response packets containing invalid authenticators or 
                Message Authenticator attributes received from the server."
            ::= { gswAuthEntry 11 }
 
           authRxUnknown  OBJECT-TYPE
            SYNTAX  Counter32
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "The number of RADIUS packets that were received from the server on the authentication port
                 and dropped for some other reason."
            ::= { gswAuthEntry 12 }

           authRxDrops  OBJECT-TYPE
            SYNTAX  Counter32
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "The number of RADIUS packets that were received from the server on the authentication port and
                 dropped for some other reason."
            ::= { gswAuthEntry 13 }
           
            authTxRequests  OBJECT-TYPE
            SYNTAX  Counter32
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "The number of RADIUS Access-Request packets sent to the server. 
                This does not include retransmissions."
            ::= { gswAuthEntry 14 }

            authTxRetran  OBJECT-TYPE
            SYNTAX  Counter32
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "The number of RADIUS Access-Request packets retransmitted to the RADIUS authentication server."
            ::= { gswAuthEntry 15 }

            authTxPending  OBJECT-TYPE
            SYNTAX  Counter32
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "The number of RADIUS Access-Request packets destined for the server that have not yet timed out or received a response. 
                This variable is incremented when an Access-Request is sent and decremented due to receipt of an Access-Accept, 
                Access-Reject, Access-Challenge, timeout, or retransmission. "
            ::= { gswAuthEntry 16 }

            authTxTimeouts  OBJECT-TYPE
            SYNTAX  Counter32
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "The number of authentication timeouts to the server. 
                After a timeout, the client may retry to the same server, send to a different server, or give up. 
                A retry to the same server is counted as a retransmit as well as a timeout. 
                A send to a different server is counted as a Request as well as a timeout."
            ::= { gswAuthEntry 17 }
            
 		authClrCnt OBJECT-TYPE
			SYNTAX  INTEGER {
						noaction(1),
						action(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" It will clear the counter of authentication(trigger)
				1:no action
				2:action"
			::= { gswAuthEntry 18 }
			
-- Aggregation
	gswAggrTable  OBJECT-TYPE
        SYNTAX  SEQUENCE OF GswAggrEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "This table is used to configure the aggregation group."
        ::= { faGswSnmpAggr 1 }

    gswAggrEntry  OBJECT-TYPE
        SYNTAX  GswAggrEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "The Entry of aggregation group configuration."
    --    INDEX  { aggrChassisIndex, aggrPortIndex }
        INDEX  { gswChassisIndex, aggrGroupID }
        ::= { gswAggrTable 1 }
        

    GswAggrEntry ::=
        SEQUENCE {
            aggrGroupID	         Integer32,
            aggrMemberPort		 DisplayString
        }

        aggrGroupID  OBJECT-TYPE
            SYNTAX  Integer32 (1..7)
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "Indicates the group ID for the settings contained in the same row.
                 Only one group ID is valid per port."
            ::= { gswAggrEntry 1 }
            
        aggrMemberPort OBJECT-TYPE
	        SYNTAX  DisplayString
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "Each switch port is listed for each group ID.
                 Only full duplex ports can join an aggregation and ports must be in the same speed in each group,
                 Static aggregation and LACP can not both be enabled on the same ports,
                 Static aggregation can not be enabed on ports whose 802.1X Admin State is not Authorized.
                 Setting format [<port_list>]"
            ::= { gswAggrEntry 2 }
            
	gswLACPSysTable  OBJECT-TYPE
        SYNTAX  SEQUENCE OF GswLACPSysEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "This table is used to show the LACP system status."
        ::= { faGswSnmpAggr 2 }

    gswLACPSysEntry  OBJECT-TYPE
        SYNTAX  GswLACPSysEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "The Entry of LACP group system status per port."
        INDEX  { gswChassisIndex, lacpAggrIndex }
        ::= { gswLACPSysTable 1 }
        
    GswLACPSysEntry ::=
        SEQUENCE {
            lacpAggrIndex        Integer32,  
            lacpSysAggrID 		 DisplayString,
            lacpSysPartnerID     DisplayString,
            lacpSysPartnerKey    Counter32,
            lacpSysLastChanged   DisplayString,
            lacpSysLoaclPorts    DisplayString
        }
        
        lacpAggrIndex  OBJECT-TYPE
            SYNTAX  Integer32 (1..28)
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "It starts from 1 to 28 contiguously."
            ::= { gswLACPSysEntry 1 }


     lacpSysAggrID  OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "The Aggregation ID associated with this aggregation instance."
        ::= { gswLACPSysEntry 2 }
            
     lacpSysPartnerID  OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "The system ID (MAC address) of the aggregation partner."
        ::= { gswLACPSysEntry 3 }

 	 lacpSysPartnerKey OBJECT-TYPE
		SYNTAX  Counter32
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
			"The Key that the partner has assigned to this aggregation ID."
 		::= { gswLACPSysEntry 4 }

     lacpSysLastChanged  OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "The time since this aggregation changed."
        ::= { gswLACPSysEntry 5 }
        
     lacpSysLoaclPorts  OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "Shows which ports are a part of this aggregation for this switch."
        ::= { gswLACPSysEntry 6 }
            
	gswLACPPortTable  OBJECT-TYPE
        SYNTAX  SEQUENCE OF GswLACPPortEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "This table is used to configure the LACP group."
        ::= { faGswSnmpAggr 3 }

    gswLACPPortEntry  OBJECT-TYPE
        SYNTAX  GswLACPPortEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "The Entry of LACP group configuration."
        INDEX  { gswChassisIndex, gswPortIndex }
        ::= { gswLACPPortTable 1 }
        
    GswLACPPortEntry ::=
        SEQUENCE {
            lacpEnabledConf	     TruthValue,
            lacpKeyConf		     Counter32,
            lacpRoleConf 		 INTEGER,
            lacpEnabledStatus    TruthValue,
            lacpKeyStatus		 Counter32,
            lacpAggrID 			 DisplayString,
            lacpPartnerID        DisplayString,
            lacpPartnerPort      Counter32,
            lacpRx               Counter32,
            lacpTx               Counter32, 
            lacpUnknown          Counter32, 
            lacpIllegal          Counter32  
        }

     lacpEnabledConf  OBJECT-TYPE
        SYNTAX  TruthValue
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "Controls whether LACP is enabled on this switch port."
        ::= { gswLACPPortEntry 1 }
            
	 lacpKeyConf OBJECT-TYPE
		SYNTAX  Counter32
		MAX-ACCESS  read-write
		STATUS  current
		DESCRIPTION
			"The Key value incurred by the port, range 0-65535. 0 is auto."
 		::= { gswLACPPortEntry 2 }

	 lacpRoleConf OBJECT-TYPE
		SYNTAX  INTEGER{
				passive(1),
				active(2)
			}
		MAX-ACCESS  read-write
		STATUS  current
		DESCRIPTION
			"The Role shows the LACP activity status.
			1:passive
			2:active"
 		::= { gswLACPPortEntry 3 }
 		
     lacpEnabledStatus  OBJECT-TYPE
        SYNTAX  TruthValue
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "Shows whether LACP is enabled on this switch port."
        ::= { gswLACPPortEntry 4 }

 	 lacpKeyStatus OBJECT-TYPE
		SYNTAX  Counter32
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
			"The key assigned to this port. Only ports with the same key can aggregate together."
 		::= { gswLACPPortEntry 5 }

 	 lacpAggrID OBJECT-TYPE
		SYNTAX  DisplayString
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
			"The Aggregation ID assigned to this aggregation group."
 		::= { gswLACPPortEntry 6 }

 	 lacpPartnerID OBJECT-TYPE
		SYNTAX  DisplayString
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
			"The partner's System ID (MAC address)."
 		::= { gswLACPPortEntry 7 }

 	 lacpPartnerPort OBJECT-TYPE
		SYNTAX  Counter32
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
			"The partner's port number connected to this port."
 		::= { gswLACPPortEntry 8 }

 	 lacpRx OBJECT-TYPE
		SYNTAX  Counter32
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
			"Shows how many LACP frames have been received at each port."
 		::= { gswLACPPortEntry 9 }

 	 lacpTx OBJECT-TYPE
		SYNTAX  Counter32
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
			"Shows how many LACP frames have been sent from each port."
 		::= { gswLACPPortEntry 10 }

 	 lacpUnknown OBJECT-TYPE
		SYNTAX  Counter32
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
			"Shows how many unknown LACP frames have been discarded at each port."
 		::= { gswLACPPortEntry 11 }

 	 lacpIllegal OBJECT-TYPE
		SYNTAX  Counter32
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
			"Shows how many illegal LACP frames have been discarded at each port."
 		::= { gswLACPPortEntry 12 } 		
 		 
	gswLACPClrCnt  OBJECT-TYPE
			SYNTAX  INTEGER {
						noaction(1),
						action(2)
					}
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
				" It will clear all the LACP counter of each port(trigger)
				1:no action
				2:action"
        ::= { faGswSnmpAggr 4 } 
		 		
-- RSTP
    gswSysProirity  OBJECT-TYPE
        SYNTAX  INTEGER {
        	p0(1),
            p4096(2),
            p8192(3),
            p12288(4),
            p16384(5),
            p20480(6),
            p24576(7),
			p28672(8),
			p32768(9),
			p36864(10),
			p40960(11),
			p45056(12),
			p49512(13),
			p53248(14),
			p57344(15),
			p61440(16)
        }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "A value used to represent the priority component of a Bridge Identifier:
            1:0
            2:4096
            3:8192
            4:12288
            5:16384
            6:20480
            7:24576
            8:28672
            9:32768
            10:36864
            11:40960
            12:45056
            13:49512
            14:53248
            15:57344
            16:61440"
        ::= { faGswSnmpSTP 1 }
        
    gswMaxAge  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "The maximum age of the information transmitted by the Bridge when it is the Root Bridge. 
             Valid values are in the range 6 to 200 seconds. "
        ::= { faGswSnmpSTP 2 }
        
     gswForwardDelay  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "The delay used by STP Bridges to transition Root and Designated Ports to Forwarding (used in STP compatible mode). 
            Valid values are in the range 4 to 30 seconds. "
        ::= { faGswSnmpSTP 3 }

      gswVersion  OBJECT-TYPE
        SYNTAX  INTEGER {
        	compatible(1),
            normal(2)
        }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "The STP compatibility mode setting.
			1:compatible
			2:normal"
        ::= { faGswSnmpSTP 4 }
        
      gswAggrPortEnable  OBJECT-TYPE
        SYNTAX  INTEGER {
        	disable(1),
            enable(2)
        }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "Controls whether RSTP is enabled on this switch port.
			1:disable
			2:enable"
        ::= { faGswSnmpSTP 5 }
        
       gswAggrPortPathCost  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "Controls the path cost incurred by the port.Valid values are in the range 0 to 200000000.
            If the value is 0, it means auto."
        ::= { faGswSnmpSTP 6 }

        gswAggrPortPriority  OBJECT-TYPE
        SYNTAX  INTEGER {
        	p0(1),
            p16(2),
            p32(3),
            p48(4),
            p64(5),
            p80(6),
            p96(7),
            p112(8),
            p128(9),
            p144(10),
            p160(11),
            p176(12),
            p192(13),
            p208(14),
            p224(15),
            p240(16)
        }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "Controls the path cost incurred by the port. 
            The Auto setting will set the path cost as appropriate by the physical link speed, 
            using the 802.1D recommended values. Using the Specific setting, a user-defined value can be entered. 
            Valid values are in the range 1 to 200000000. 			
            1:0
			2:16
			3:32
			4:48
			5:64
			6:80
			7:96
			8:112
			9:128
			10:144
			11:160
			12:176
			13:192
			14:208
			15:224
			16:240"
        ::= { faGswSnmpSTP 7 }

       
      gswActivePorts  OBJECT-TYPE
        SYNTAX  Counter32        
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "The number switch ports active in the RSTP bridge instance (aggregated ports count only as one)."
        ::= { faGswSnmpSTP 8 }
 
      gswBridgeID  OBJECT-TYPE
        SYNTAX  DisplayString        
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "The Bridge ID of this Bridge instance."
        ::= { faGswSnmpSTP 9 }
     
      gswRootID  OBJECT-TYPE
        SYNTAX  DisplayString        
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "The Bridge ID of the currently elected root bridge."
        ::= { faGswSnmpSTP 10 }
        
      gswRootPort  OBJECT-TYPE
        SYNTAX  DisplayString        
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "The switch port currently assigned the root port role."
        ::= { faGswSnmpSTP 11 }
 
      gswRootCost  OBJECT-TYPE
        SYNTAX  Counter32        
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "Root Path Cost. For the Root Bridge this is zero. 
            For all other Bridges, it is the sum of the Port Path Costs on the least cost path to the Root Bridge. "
        ::= { faGswSnmpSTP 12 }

      gswTopologyFlag  OBJECT-TYPE
			SYNTAX  INTEGER {
						steady(1),
						changing(2)
					}
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
				" The current state of the Topology Change Flag for this Bridge instance.
				1:steady
				2:changing"
        ::= { faGswSnmpSTP 13 }
       
    gswSTPPortTable  OBJECT-TYPE
        SYNTAX  SEQUENCE OF GswSTPPortEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "A list of STP information entries."
        ::= { faGswSnmpSTP 14 }

    gswSTPPortEntry  OBJECT-TYPE
        SYNTAX  GswSTPPortEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "An entry containing STP information."
        INDEX  { stpChassisIndex, stpPortIndex }
        ::= { gswSTPPortTable 1 }
        
    GswSTPPortEntry ::=
        SEQUENCE {
            -- Configuration
            stpChassisIndex 	 Integer32,
            stpPortIndex         Integer32,
            stpEnable			 INTEGER,
            stpPathCostConf		 Counter32,
            stpPriorityConf		 INTEGER,
            stpEdgeConf	         INTEGER,
            stpP2PConf	         INTEGER,
            -- Status
            stpRole			     INTEGER,
            stpState		     INTEGER,
         	-- Statistics   
            stpTxRSTP	         Counter32,
            stpTxSTP	         Counter32,
            stpTxTCN	         Counter32,
            stpRxRSTP	         Counter32,
            stpRxSTP	         Counter32,
            stpRxTCN	         Counter32,
            stpUnknown    		 Counter32,
            stpIllegal    		 Counter32
        }

        stpChassisIndex  OBJECT-TYPE
            SYNTAX  Integer32 (0..9)
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "A unique value for each chassis.
                It starts from 0 to 9 contiguously."
            ::= { gswSTPPortEntry 1 }

        stpPortIndex  OBJECT-TYPE
            SYNTAX  Integer32 (1..28)
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "A unique value for each port.
                It starts from 1 to 28 contiguously."
            ::= { gswSTPPortEntry 2 }

            
        stpEnable OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "Controls whether RSTP is enabled on this switch port:
                1:disable
                2:enable"
            ::= { gswSTPPortEntry 3 }		
               
       stpPathCostConf  OBJECT-TYPE
	       SYNTAX  Counter32
	       MAX-ACCESS  read-write
	       STATUS  current
	       DESCRIPTION
            	"Controls the path cost incurred by the port.Valid values are in the range 1 to 200000000.
            	If the value is 0, it means auto."
           ::= { gswSTPPortEntry 4 }

        stpPriorityConf  OBJECT-TYPE
	        SYNTAX  INTEGER {
	        	p0(1),
	            p16(2),
	            p32(3),
	            p48(4),
	            p64(5),
	            p80(6),
	            p96(7),
	            p112(8),
	            p128(9),
	            p144(10),
	            p160(11),
	            p176(12),
	            p192(13),
	            p208(14),
	            p224(15),
	            p240(16)
	        }
	        MAX-ACCESS  read-write
	        STATUS  current
        DESCRIPTION
            "Controls the path cost incurred by the port. 
            The Auto setting will set the path cost as appropriate by the physical link speed, 
            using the 802.1D recommended values. Using the Specific setting, a user-defined value can be entered. 
            Valid values are in the range 1 to 200000000. 			
            1:0
			2:16
			3:32
			4:48
			5:64
			6:80
			7:96
			8:112
			9:128
			10:144
			11:160
			12:176
			13:192
			14:208
			15:224
			16:240"
        ::= { gswSTPPortEntry 5 }

 		stpEdgeConf OBJECT-TYPE
	        SYNTAX  INTEGER {
	        	disable(1),
	            enable(2)
	        }
	        MAX-ACCESS  read-write
	        STATUS  current
	        DESCRIPTION
	            "Controls whether the port is known to connect directly to edge devices:
	            1:disable
				2:enable"
            ::= { gswSTPPortEntry 6 }
 
  		stpP2PConf OBJECT-TYPE
	        SYNTAX  INTEGER {
	        	forcetrue(1),
	            forcefalse(2),
	            auto(3)
	        }
	        MAX-ACCESS  read-write
	        STATUS  current
	        DESCRIPTION
	            "Controls whether the port connects to a point-to-point LAN rather than a shared medium:
	            1:force true
				2:force false
				3:auto"
            ::= { gswSTPPortEntry 7 }
            
  		stpRole OBJECT-TYPE
	        SYNTAX  INTEGER {
	        	disable(1),
	            alternate(2),
	            backup(3),
	            root(4),
	            designated(5),
	            nonstp(6)
	        }
	        MAX-ACCESS  read-only
	        STATUS  current
	        DESCRIPTION
	            "The current RSTP port role:
	            1:disable
				2:alternate
				3:backkup
				4:root
				5:designated port
				6:Non-STP"
            ::= { gswSTPPortEntry 8 } 
            
   		stpState OBJECT-TYPE
	        SYNTAX  INTEGER {
	        	disable(1),
	            blocking(2),
	            learning(3),
	            forwarding(4),
	            nonstp(5)
	        }
	        MAX-ACCESS  read-only
	        STATUS  current
	        DESCRIPTION
	            "The current RSTP port role:
	            1:disable
				2:blocking
				3:learning
				4:forwarding
				5:Non-STP"
            ::= { gswSTPPortEntry 9 }
            
    		stpTxRSTP OBJECT-TYPE
	        SYNTAX  Counter32 
	        MAX-ACCESS  read-only
	        STATUS  current
	        DESCRIPTION
	            "The number of legacy RSTP Configuration BPDU's transmitted on the port."
            ::= { gswSTPPortEntry 10 }
            
    		stpTxSTP OBJECT-TYPE
	        SYNTAX  Counter32 
	        MAX-ACCESS  read-only
	        STATUS  current
	        DESCRIPTION
	            "The number of legacy STP Configuration BPDU's transmitted on the port."
            ::= { gswSTPPortEntry 11 }  
 
     		stpTxTCN OBJECT-TYPE
	        SYNTAX  Counter32 
	        MAX-ACCESS  read-only
	        STATUS  current
	        DESCRIPTION
	            "The number of (legacy) Topology Change Notification BPDU's transmitted on the port. "
            ::= { gswSTPPortEntry 12 } 
            
             stpRxRSTP OBJECT-TYPE
	        SYNTAX  Counter32 
	        MAX-ACCESS  read-only
	        STATUS  current
	        DESCRIPTION
	            "The number of legacy RSTP Configuration BPDU's received on the port."
            ::= { gswSTPPortEntry 13 }
            
    		stpRxSTP OBJECT-TYPE
	        SYNTAX  Counter32 
	        MAX-ACCESS  read-only
	        STATUS  current
	        DESCRIPTION
	            "The number of legacy STP Configuration BPDU's received on the port."
            ::= { gswSTPPortEntry 14 }  
 
     		stpRxTCN OBJECT-TYPE
	        SYNTAX  Counter32 
	        MAX-ACCESS  read-only
	        STATUS  current
	        DESCRIPTION
	            "The number of (legacy) Topology Change Notification BPDU's received on the port."
            ::= { gswSTPPortEntry 15 }

     		stpUnknown OBJECT-TYPE
	        SYNTAX  Counter32 
	        MAX-ACCESS  read-only
	        STATUS  current
	        DESCRIPTION
	            "The number of unknown Spanning Tree BPDU's received (and discarded) on the port."
            ::= { gswSTPPortEntry 16 }
         
             stpIllegal OBJECT-TYPE
	        SYNTAX  Counter32 
	        MAX-ACCESS  read-only
	        STATUS  current
	        DESCRIPTION
	            "The number of illegal Spanning Tree BPDU's received (and discarded) on the port. "
            ::= { gswSTPPortEntry 17 }
-- MAC Table
     gswDisableAutoAging  OBJECT-TYPE
        SYNTAX  TruthValue
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "Disable the automatic aging of dynamic entries."
        ::= { faGswSnmpMac 1 }

      gswAgingTime  OBJECT-TYPE
        SYNTAX      Counter32
        UNITS       "seconds"
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION                                  
            "By default, dynamic entries are removed from the MAC table after 300 seconds.
             This removal is also called aging.
             Configure aging time by entering a value here in seconds,
             The allowed range is 10 to 1000000 seconds."
        DEFVAL     { 300 }
        ::= { faGswSnmpMac 2 }
            
 	gswMacTableLearningTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF GswMacTableLearningEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This table allows for configure port learning mode."
        ::= { faGswSnmpMac 3 }

    gswMacTableLearningEntry OBJECT-TYPE
        SYNTAX      GswMacTableLearningEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "The entry of ports."
        INDEX { gswChassisIndex, gswPortIndex }
        ::= { gswMacTableLearningTable 1 }

    GswMacTableLearningEntry ::=
        SEQUENCE {     
            macPortLearningMode      	INTEGER
        }
          
        macPortLearningMode OBJECT-TYPE
            SYNTAX      INTEGER {
                            auto(1),
                            disable(2),
                            secure(3)
                        }    
            MAX-ACCESS  read-write
            STATUS      current
            DESCRIPTION
                "If another module is in control of the mode, then it cannot be changed by the user.
                 An example of such a module is the MAC-Based Authentication under 802.1X.
                 Each port can do learning based upon the following settings:
                 Auto: Learning is done automatically as soon as a frame with unknown SMAC is received.
                 Disable: No learning is done.
                 Secure: Only static MAC entries are learned, all other frames are dropped.
                         <NOTE> Make sure that the link used for managing the switch is added to
                                the Static Mac Table before changing to secure learning mode,
                                otherwise the management link is lost and can only be restored by
                                using another non-secure port"
            ::= { gswMacTableLearningEntry 1 }

    gswAddStaticMAC OBJECT-TYPE
        SYNTAX      DisplayString
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION                                  
            "Add a new entry to the static MAC table. The static MAC table can contain 64 entries.
             By default, no ports are members.
             Syntax: <mac_addr> [<vid>]"
        ::= { faGswSnmpMac 4 }

    gswDeleteStaticMAC OBJECT-TYPE
        SYNTAX      DisplayString
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Delete an entry from the static MAC table.
             Syntax: <mac_addr> [<vid>]"
        ::= { faGswSnmpMac 5 }

    gswStaticMacTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF GswStaticMacEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "The static entries in the MAC table are shown in this table."
        ::= { faGswSnmpMac 6 }

    gswStaticMacEntry OBJECT-TYPE
        SYNTAX      GswStaticMacEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "The entry of static MAC addresses of table."
        INDEX { gswChassisIndex, macStaticMacIndex }
        ::= { gswStaticMacTable 1 }

    GswStaticMacEntry ::=
        SEQUENCE {       
            macStaticMacIndex        Integer32,           
            macStaticMacVlanID       Integer32,
            macStaticMacAddress      MacAddress,
            macStaticMacPortMembers  DisplayString
        }
          
        macStaticMacIndex OBJECT-TYPE
            SYNTAX      Integer32 (1..64)
            MAX-ACCESS  read-only
            STATUS      current
            DESCRIPTION
                "Indicates the Index of static MAC address entries."
            ::= { gswStaticMacEntry 1 }
  
        macStaticMacVlanID OBJECT-TYPE
            SYNTAX      Integer32 (1..4095)
            MAX-ACCESS  read-only
            STATUS      current
            DESCRIPTION
                "The VLAN ID of the entry."
            ::= { gswStaticMacEntry 2 }
  
        macStaticMacAddress OBJECT-TYPE
            SYNTAX      MacAddress
            MAX-ACCESS  read-only
            STATUS      current
            DESCRIPTION
                "The MAC address of the entry."
            ::= { gswStaticMacEntry 3 }
  
        macStaticMacPortMembers OBJECT-TYPE
            SYNTAX      DisplayString
            MAX-ACCESS  read-write
            STATUS      current
            DESCRIPTION
                "Indicates which ports are members of the entry.
                Setting format [<port_list>]"
            ::= { gswStaticMacEntry 4 }
            
    gswDynamicMacTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF GswDynamicMacEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "The dynamic entries in the MAC table are shown in this table."
        ::= { faGswSnmpMac 7 }

    gswDynamicMacEntry OBJECT-TYPE
        SYNTAX      GswDynamicMacEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "The entry of dynamic MAC addresses of table."
        INDEX { gswChassisIndex, macDynamicMacIndex }
        ::= { gswDynamicMacTable 1 }

    GswDynamicMacEntry ::=
        SEQUENCE {       
            macDynamicMacIndex        Integer32,
            macDynamicMacType         INTEGER,           
            macDynamicMacVlanID       Integer32,
            macDynamicMacAddress      MacAddress,
            macDynamicCopyToCPU       INTEGER,
            macDynamicMacPortMembers   DisplayString
        }
          
        macDynamicMacIndex OBJECT-TYPE
            SYNTAX      Integer32 (1..8192)
            MAX-ACCESS  read-only
            STATUS      current
            DESCRIPTION
                "Indicates the Index of dynamic MAC address entries."
            ::= { gswDynamicMacEntry 1 }
            
    	macDynamicMacType OBJECT-TYPE
	        SYNTAX      INTEGER {
	                        dynamic(1),
	                        static(2)
	                    }
	        MAX-ACCESS  read-only
	        STATUS      current
	        DESCRIPTION
	            "The type of the dynamic MAC entry."
	        ::= { gswDynamicMacEntry 2 }
  
        macDynamicMacVlanID OBJECT-TYPE
            SYNTAX      Integer32 (1..4095)
            MAX-ACCESS  read-only
            STATUS      current
            DESCRIPTION
                "The VLAN ID of the entry."
            ::= { gswDynamicMacEntry 3 }
  
        macDynamicMacAddress OBJECT-TYPE
            SYNTAX      MacAddress
            MAX-ACCESS  read-only
            STATUS      current
            DESCRIPTION
                "The MAC address of the entry."
            ::= { gswDynamicMacEntry 4 }
            
         macDynamicCopyToCPU OBJECT-TYPE
            SYNTAX      TruthValue   
            MAX-ACCESS  read-only
            STATUS      current
            DESCRIPTION
                "The Mac Address will copy to cpu."
            ::= { gswDynamicMacEntry 5 }

        macDynamicMacPortMembers OBJECT-TYPE
            SYNTAX      DisplayString
            MAX-ACCESS  read-only
            STATUS      current
            DESCRIPTION
                "Indicates which ports are members of the entry.
                Setting format [<port_list>]."
            ::= { gswDynamicMacEntry 6 }


    gswFlushDynamicMacEntries OBJECT-TYPE
        SYNTAX      INTEGER {
                        trigger(1),
                        normal(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Flushes all dynamic entries."
        ::= { faGswSnmpMac 8 }      
        
        gswMacAddressCounter OBJECT-TYPE
        SYNTAX      Integer32 (1..8192)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Mac Address Counter."
        ::= { faGswSnmpMac 9 }

        
-- VLANs        
    gswAddVlanID OBJECT-TYPE
        SYNTAX      Integer32 (1..4095)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION                                  
            "Add a new VLAN ID, and the VLAN can be configured as needed.
             Legal values for a VLAN ID are 1 through 4095,
             and for every new VLAN entry all ports are member.
             Syntax: <vlan_id>"
        ::= { faGswSnmpVLAN 1 }

    gswDeleteVlanByID OBJECT-TYPE
        SYNTAX      Integer32 (1..4095)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Delete a VLAN from indicated ID.
             Syntax: <vlan_id>"
        ::= { faGswSnmpVLAN 2 }

    gswVlanMembershipTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF GswVlanMembershipEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "The VLAN membership configuration can be monitored and modified here."
        ::= { faGswSnmpVLAN 3 }

    gswVlanMembershipEntry OBJECT-TYPE
        SYNTAX      GswVlanMembershipEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "The Entry of VLAN memberships."
        INDEX { gswVlanID }
        ::= { gswVlanMembershipTable 1 }

    GswVlanMembershipEntry ::=
        SEQUENCE {       
            gswVlanID                Integer32,
            gswVlanMembershipPorts   DisplayString
        }
 
        gswVlanID OBJECT-TYPE
            SYNTAX      Integer32 (1..4095)
            MAX-ACCESS  read-only
            STATUS      current
            DESCRIPTION
                "Indicates the ID of this particular VLAN."
            ::= { gswVlanMembershipEntry 1 }

  
        gswVlanMembershipPorts OBJECT-TYPE
            SYNTAX      DisplayString
            MAX-ACCESS  read-write
            STATUS      current
            DESCRIPTION
                "Add or modify membership port list of VLAN."
            ::= { gswVlanMembershipEntry 2 }

    gswVlanPortTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF GswVlanPortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This table is used for configuring the switch VLAN port."
        ::= { faGswSnmpVLAN 4 }    
        
    

    gswVlanPortEntry OBJECT-TYPE
        SYNTAX      GswVlanPortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "The Entry of VLAN ports."
        INDEX { gswChassisIndex, gswPortIndex }
        ::= { gswVlanPortTable 1 }

    GswVlanPortEntry ::=
        SEQUENCE {         
            gswVlanPortRxFiltering   INTEGER,
            gswVlanPortFrameType     INTEGER,
            gswVlanPortVlanID        Integer32
        }

        gswVlanPortRxFiltering OBJECT-TYPE
            SYNTAX      INTEGER {
                            enabled(1),
                            disabled(2)
                        }
            MAX-ACCESS  read-write
            STATUS      current
            DESCRIPTION
                "This parameter affects VLAN ingress processing.
                 If ingress filtering is enabled and the ingress port is not a member of
                 the classified VLAN of the frame,
                 the frame is discarded. By default, ingress filtering is disabled."
            DEFVAL      { disabled }     
            ::= { gswVlanPortEntry 1 }
  
        gswVlanPortFrameType OBJECT-TYPE
            SYNTAX      INTEGER {
                            all(1),
                            tagged(2)
                        }
            MAX-ACCESS  read-write
            STATUS      current
            DESCRIPTION
                "Determines whether the port accepts all frames or only tagged frames.
                 This parameter affects VLAN ingress processing.
                 If the port only accepts tagged frames, untagged frames received on the port are discarded.
                 By default, the frame type is set to All."
            DEFVAL      { all }     
            ::= { gswVlanPortEntry 2 }
  
        gswVlanPortVlanID OBJECT-TYPE
            SYNTAX      Integer32 (0..4095)
            MAX-ACCESS  read-write
            STATUS      current
            DESCRIPTION
                "Configures the VLAN identifier for the port.
                 The allowed values are 0 through 4095. The default value is 1.
                 If the value is 0, a VLAN tag with the classified VLAN ID is inserted in frames transmitted on the port.
                 This mode(trunking mode) is normally used for ports connected to VLAN aware switches.
                 Tx tag (Next Node) should be set to Untag_pvid when this value is used.
                 If the value are 1 through 4095, untagged frames received on the port are classified to the Port VLAN ID.
                 If VLAN awareness is disabled, all frames received on the port are classified to the Port VLAN ID.
                 If the classified VLAN ID of a frame transmitted on the port is different from the Port VLAN ID,
                 a VLAN tag with the classified VLAN ID is inserted in the frame."
            DEFVAL      { 1 }     
            ::= { gswVlanPortEntry 3 }

-- QoS

    gswStormUcStatus OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Enable or disable the storm control status for the unicast frame type."
        DEFVAL      { false }
        ::= { faGswSnmpQoS 1 }
        
    gswStormMcStatus OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Enable or disable the storm control status for the multicast frame type."
        DEFVAL      { false }
        ::= { faGswSnmpQoS 2 }
        
    gswStormBcStatus OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Enable or disable the storm control status for the broadcast frame type."
        DEFVAL      { false }
        ::= { faGswSnmpQoS 3 }
            
     gswStormUcRate OBJECT-TYPE
        SYNTAX      INTEGER {
                        r1(1),
                        r2(2),
                        r4(3),
                        r8(4),
                        r16(5),
                        r32(6),
                        r64(7),
                        r128(8),
                        r256(9),
                        r512(10),
                        r1k(11),
                        r2k(12),
                        r4k(13),
                        r8k(14),
                        r16k(15),
                        r32k(16),
                        r64k(17),
                        r128k(18),
                        r256k(19),
                        r512k(20),
                        r1024k(21)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The rate unit is packet per second (pps), the range is 1~512 or 1k ~ 512k."
        DEFVAL      { 1 }
        ::= { faGswSnmpQoS 4 }
        
     gswStormMcRate OBJECT-TYPE
        SYNTAX      INTEGER {
                        r1(1),
                        r2(2),
                        r4(3),
                        r8(4),
                        r16(5),
                        r32(6),
                        r64(7),
                        r128(8),
                        r256(9),
                        r512(10),
                        r1k(11),
                        r2k(12),
                        r4k(13),
                        r8k(14),
                        r16k(15),
                        r32k(16),
                        r64k(17),
                        r128k(18),
                        r256k(19),
                        r512k(20),
                        r1024k(21)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The rate unit is packet per second (pps), the range is 1~512 or 1k ~ 512k."
        DEFVAL      { 1 }
        ::= { faGswSnmpQoS 5 }
        
     gswStormBcRate OBJECT-TYPE
        SYNTAX      INTEGER {
                        r1(1),
                        r2(2),
                        r4(3),
                        r8(4),
                        r16(5),
                        r32(6),
                        r64(7),
                        r128(8),
                        r256(9),
                        r512(10),
                        r1k(11),
                        r2k(12),
                        r4k(13),
                        r8k(14),
                        r16k(15),
                        r32k(16),
                        r64k(17),
                        r128k(18),
                        r256k(19),
                        r512k(20),
                        r1024k(21)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The rate unit is packet per second (pps), the range is 1~512 or 1k ~ 512k."
        DEFVAL      { 1 }
        ::= { faGswSnmpQoS 6 }
        
	gswQoSPortTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF GswQoSPortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "The QoS port configuration can be monitored and modified here."
        ::= { faGswSnmpQoS 7 }

    gswQoSPortEntry OBJECT-TYPE
        SYNTAX      GswQoSPortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "The Entry of QoS port."
        INDEX { gswChassisIndex, gswPortIndex }
        ::= { gswQoSPortTable 1 }

    GswQoSPortEntry ::=
        SEQUENCE {
        	qosDefClass              INTEGER,
        	qosQCL	                 INTEGER,
            qosPriority              INTEGER,
            qosQueuingMode           INTEGER,
            qosWeightedLow           INTEGER,
            qosWeightedNormal        INTEGER,
            qosWeightedMedium        INTEGER,
            qosWeightedHigh          INTEGER
        }
 
     qosDefClass OBJECT-TYPE
        SYNTAX      INTEGER {
                        low(1),
                        normal(2),
                        medium(3),
                        high(4)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Configure the default QoS class for the port, that is, 
             	the QoS class for frames not matching any of the QCEs in the QCL."
        DEFVAL      { 1 }
        ::= { gswQoSPortEntry 1 }

  
     qosQCL OBJECT-TYPE
        SYNTAX      INTEGER {
                        p1(1),
                        p2(2),
                        p3(3),
                        p4(4),
                        p5(5),
                        p6(6),
                        p7(7),
                        p8(8),
                        p9(9),
                        p10(10),
                        p11(11),
                        p12(12),
                        p13(13),
                        p14(14),
                        p15(15),
                        p16(16),
                        p17(17),
                        p18(18),
                        p19(19),
                        p20(20),
                        p21(21),
                        p22(22),
                        p23(23),
                        p24(24), 
                        p25(25),
                        p26(26),
                        p27(27),
                        p28(28)
         
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Select which QCL to use for the port."
        DEFVAL      { 1 }
        ::= { gswQoSPortEntry 2 }

     qosPriority OBJECT-TYPE
        SYNTAX      INTEGER {
                        p0(1),
                        p1(2),
                        p2(3),
                        p3(4),
                        p4(5),
                        p5(6),
                        p6(7),
                        p7(8)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Select the default user priority for this port when adding a Tag to the untagged frames."
        DEFVAL      { 1 }
        ::= { gswQoSPortEntry 3 }
        
     qosQueuingMode OBJECT-TYPE
        SYNTAX      INTEGER {
                        priority(1),
                        weighted(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Select which Queuing mode for this port."
        DEFVAL      { 1 }
        ::= { gswQoSPortEntry 4 }
        
     qosWeightedLow OBJECT-TYPE
        SYNTAX      INTEGER {
                        w1(1),
                        w2(2),
                        w4(3),
                        w8(4)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Setting Queue weighted(Low:Normal:Medium:High) if the 'Queuing Mode' is 'Weighted'."
        DEFVAL      { 1 }
        ::= { gswQoSPortEntry 5 }

     qosWeightedNormal OBJECT-TYPE
        SYNTAX      INTEGER {
                        w1(1),
                        w2(2),
                        w4(3),
                        w8(4)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Setting Queue weighted(Low:Normal:Medium:High) if the 'Queuing Mode' is 'Weighted'."
        DEFVAL      { 2 }
        ::= { gswQoSPortEntry 6 }
        
     qosWeightedMedium OBJECT-TYPE
        SYNTAX      INTEGER {
                        w1(1),
                        w2(2),
                        w4(3),
                        w8(4)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Setting Queue weighted(Low:Normal:Medium:High) if the 'Queuing Mode' is 'Weighted'."
        DEFVAL      { 3 }
        ::= { gswQoSPortEntry 7 }
        
     qosWeightedHigh OBJECT-TYPE
        SYNTAX      INTEGER {
                        w1(1),
                        w2(2),
                        w4(3),
                        w8(4)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Setting Queue weighted(Low:Normal:Medium:High) if the 'Queuing Mode' is 'Weighted'."
        DEFVAL      { 4 }
        ::= { gswQoSPortEntry 8 }
        
	gswQceActionTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF GswQceActionEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "The QCE action can be monitored and modified here."
        ::= { faGswSnmpQoS 8 }

    gswQceActionEntry OBJECT-TYPE
        SYNTAX      GswQceActionEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "The Entry of the action of the QCE."
        INDEX { gswChassisIndex, gswQclIndex }
        ::= { gswQceActionTable 1 }

    GswQceActionEntry ::=
        SEQUENCE {
            gswQclIndex              Integer32,
        	qosInsertQCE             Integer32,
        	qosDeleteQCE         	 Integer32,
            qosMoveQceDown           Integer32
        }
        
     gswQclIndex OBJECT-TYPE
		SYNTAX      Integer32 (1..28)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Select a QCL to display a table that lists all the QCEs for that particular QCL."
        DEFVAL      { 1 }
        ::= { gswQceActionEntry 1 }
        
    qosInsertQCE OBJECT-TYPE
        SYNTAX      Integer32 (0 | 1..24)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION                                  
            "Inserts a new QCE to list.
             Value 0: Add QCE to end of list.
             Value 1 ~ 24: Insert new QCE before this QCE ID."
        ::= { gswQceActionEntry 2 }

    qosDeleteQCE OBJECT-TYPE
        SYNTAX      Integer32 (1..24)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Deletes the QCE by ID. "
        ::= { gswQceActionEntry 3 }
         
    qosMoveQceDown OBJECT-TYPE
        SYNTAX      Integer32 (1..24)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Moves the QCE down the list."
        ::= { gswQceActionEntry 4 }
        
	gswQceConfTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF GswQceConfEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "The QCE configuration can be monitored and modified here."
        ::= { faGswSnmpQoS 9 }

    gswQceConfEntry OBJECT-TYPE
        SYNTAX      GswQceConfEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "The Entry of QCE."
        INDEX { gswQclIndex, gswQceIndex }
        ::= { gswQceConfTable 1 }

    GswQceConfEntry ::=
        SEQUENCE {
        	gswQceIndex				 Integer32,
            gswQceId              	 Integer32,
        	qosQceType               INTEGER,
        	qosEthernetValue         DisplayString,
            qosEthernetClass         INTEGER,
            qosVLANID                Integer32,
            qosVLANClass             INTEGER,
            qosPortMode              INTEGER,
            qosPortSpecific          Integer32,
            qosPortStart             Integer32,
            qosPortEnd               Integer32,
            qosPortClass             INTEGER,
            qosDSCPValue             Integer32,
            qosDSCPClass             INTEGER,
            qosToSP0Class            INTEGER,
            qosToSP1Class            INTEGER,
            qosToSP2Class            INTEGER,
            qosToSP3Class            INTEGER,
            qosToSP4Class            INTEGER,
            qosToSP5Class            INTEGER,
            qosToSP6Class            INTEGER,
            qosToSP7Class            INTEGER,
            qosTagP0Class            INTEGER,
            qosTagP1Class            INTEGER,
            qosTagP2Class            INTEGER,
            qosTagP3Class            INTEGER,
            qosTagP4Class            INTEGER,
            qosTagP5Class            INTEGER,
            qosTagP6Class            INTEGER,
            qosTagP7Class            INTEGER
        }
        
     gswQceIndex OBJECT-TYPE
		SYNTAX      Integer32 (1..24)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Select a particular QCE to edit."
        DEFVAL      { 1 }
        ::= { gswQceConfEntry 1 }
 
      gswQceId OBJECT-TYPE
		SYNTAX      Integer32 (1..24)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "A particular QCE Id."
        DEFVAL      { 1 }
        ::= { gswQceConfEntry 2 }
                
     qosQceType OBJECT-TYPE
        SYNTAX      INTEGER {
                        ethernet(1),
                        vlan(2),
                        port(3),
                        dscp(4),
                        tos(5),
                        tag(6)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Select the available type for the specific QCE."
        DEFVAL      { 1 }
        ::= { gswQceConfEntry 3 }

      qosEthernetValue OBJECT-TYPE
		SYNTAX      DisplayString
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "If the qosQceType is 'Ethernet', The Ethernet Type value can be configured here.
 				Valid ethernet type can have a value within 0x600-0xFFFF."
        ::= { gswQceConfEntry 4 }
        
     qosEthernetClass OBJECT-TYPE
        SYNTAX      INTEGER {
                        low(1),
                        normal(2),
                        medium(3),
                        high(4)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "If the qosQceType is 'Ethernet', The class can be configured here. 
            Select a traffic class of Low, Normal, Medium, or High to apply to the QCE.
			If the QCE type is ToS or Tag Priority, there are 8 rows of traffic class 
			that can be configured for each priority. "
        DEFVAL      { 1 }
        ::= { gswQceConfEntry 5 } 
 
      qosVLANID OBJECT-TYPE
		SYNTAX      Integer32 (1..4095)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "If the qosQceType is 'VLAN ID', the VLAN ID can be configured here.
            Matches the frame's VID against the QCE Key."
        DEFVAL      { 1 }
        ::= { gswQceConfEntry 6 }
        
	qosVLANClass OBJECT-TYPE
        SYNTAX      INTEGER {
                        low(1),
                        normal(2),
                        medium(3),
                        high(4)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "If the qosQceType is 'VLAN ID', the class can be configured here.
            Select a traffic class of Low, Normal, Medium, or High to apply to the QCE.
			If the QCE type is ToS or Tag Priority, there are 8 rows of traffic class 
			that can be configured for each priority. "
        DEFVAL      { 1 }
        ::= { gswQceConfEntry 7 } 
            
	qosPortMode OBJECT-TYPE
        SYNTAX      INTEGER {
                        specific(1),
                        range(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "If the qosQceType is 'TCP/UDP Port', the mode of the IPv4 TCP/UDP source/destination port can be configured here.
            1: Specific a port number
            2: Specific a range of the TCP/UDP port"
        DEFVAL      { 2 }
        ::= { gswQceConfEntry 8 }

	qosPortSpecific OBJECT-TYPE
        SYNTAX      Integer32 (0..65535)       
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "If the qosQceType is 'TCP/UDP Port', the port number can be configured here.
            The port range allowed is from 0 to 65535"
        DEFVAL      { 0 }
        ::= { gswQceConfEntry 9 }

	qosPortStart OBJECT-TYPE
        SYNTAX      Integer32 (0..65534)       
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "If the qosQceType is 'TCP/UDP Port',
 			the starting Source TCP/UDP port number of range can be configured here.
 			It is effectively when Source TCP/UDP port Mode is 'Range"
        DEFVAL      { 0 }
        ::= { gswQceConfEntry 10 }
        
	qosPortEnd OBJECT-TYPE
        SYNTAX      Integer32 (1..65535)       
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "If the qosQceType is 'TCP/UDP Port',
 			the last Source TCP/UDP port number of range can be configured here.
 			It is effectively when Source TCP/UDP port Mode is 'Range'"
        DEFVAL      { 65535 }
        ::= { gswQceConfEntry 11 }
        
	qosPortClass OBJECT-TYPE
        SYNTAX      INTEGER {
                        low(1),
                        normal(2),
                        medium(3),
                        high(4)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "If the qosQceType is 'TCP/UDP Port', the class can be configured here.
            Select a traffic class of Low, Normal, Medium, or High to apply to the QCE.
			If the QCE type is ToS or Tag Priority, there are 8 rows of traffic class 
			that can be configured for each priority. "
        DEFVAL      { 1 }
        ::= { gswQceConfEntry 12 }
   
	qosDSCPValue OBJECT-TYPE
        SYNTAX      Integer32 (0..63)       
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "If the qosQceType is 'DSCP', the DSCP value can be configured here.
 			Matches the received IPv4/IPv6 DSCP value (6 bits) against the two DSCP values in the QCE Key."
        DEFVAL      { 63 }
        ::= { gswQceConfEntry 13 }     
 
 	qosDSCPClass OBJECT-TYPE
        SYNTAX      INTEGER {
                        low(1),
                        normal(2),
                        medium(3),
                        high(4)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "If the qosQceType is 'DSCP', the class can be configured here.
            Select a traffic class of Low, Normal, Medium, or High to apply to the QCE.
			If the QCE type is ToS or Tag Priority, there are 8 rows of traffic class 
			that can be configured for each priority. "
        DEFVAL      { 1 }
        ::= { gswQceConfEntry 14 }          

 	qosToSP0Class OBJECT-TYPE
        SYNTAX      INTEGER {
                        low(1),
                        normal(2),
                        medium(3),
                        high(4)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "If the qosQceType is 'ToS', the class can be configured here.
            Select a traffic class of Low, Normal, Medium, or High to apply to the QCE.
			If the QCE type is ToS or Tag Priority, there are 8 rows of traffic class 
			that can be configured for each priority. "
        DEFVAL      { 1 }
        ::= { gswQceConfEntry 15 }

 	qosToSP1Class OBJECT-TYPE
        SYNTAX      INTEGER {
                        low(1),
                        normal(2),
                        medium(3),
                        high(4)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "If the qosQceType is 'ToS', the class can be configured here.
            Select a traffic class of Low, Normal, Medium, or High to apply to the QCE.
			If the QCE type is ToS or Tag Priority, there are 8 rows of traffic class 
			that can be configured for each priority. "
        DEFVAL      { 1 }
        ::= { gswQceConfEntry 16 }
        
 	qosToSP2Class OBJECT-TYPE
        SYNTAX      INTEGER {
                        low(1),
                        normal(2),
                        medium(3),
                        high(4)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "If the qosQceType is 'ToS', the class can be configured here.
            Select a traffic class of Low, Normal, Medium, or High to apply to the QCE.
			If the QCE type is ToS or Tag Priority, there are 8 rows of traffic class 
			that can be configured for each priority. "
        DEFVAL      { 1 }
        ::= { gswQceConfEntry 17 }
        
 	qosToSP3Class OBJECT-TYPE
        SYNTAX      INTEGER {
                        low(1),
                        normal(2),
                        medium(3),
                        high(4)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "If the qosQceType is 'ToS', the class can be configured here.
            Select a traffic class of Low, Normal, Medium, or High to apply to the QCE.
			If the QCE type is ToS or Tag Priority, there are 8 rows of traffic class 
			that can be configured for each priority. "
        DEFVAL      { 1 }
        ::= { gswQceConfEntry 18 }
        
 	qosToSP4Class OBJECT-TYPE
        SYNTAX      INTEGER {
                        low(1),
                        normal(2),
                        medium(3),
                        high(4)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "If the qosQceType is 'ToS', the class can be configured here.
            Select a traffic class of Low, Normal, Medium, or High to apply to the QCE.
			If the QCE type is ToS or Tag Priority, there are 8 rows of traffic class 
			that can be configured for each priority. "
        DEFVAL      { 1 }
        ::= { gswQceConfEntry 19 }
        
 	qosToSP5Class OBJECT-TYPE
        SYNTAX      INTEGER {
                        low(1),
                        normal(2),
                        medium(3),
                        high(4)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "If the qosQceType is 'ToS', the class can be configured here.
            Select a traffic class of Low, Normal, Medium, or High to apply to the QCE.
			If the QCE type is ToS or Tag Priority, there are 8 rows of traffic class 
			that can be configured for each priority. "
        DEFVAL      { 1 }
        ::= { gswQceConfEntry 20 }
        
 	qosToSP6Class OBJECT-TYPE
        SYNTAX      INTEGER {
                        low(1),
                        normal(2),
                        medium(3),
                        high(4)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "If the qosQceType is 'ToS', the class can be configured here.
            Select a traffic class of Low, Normal, Medium, or High to apply to the QCE.
			If the QCE type is ToS or Tag Priority, there are 8 rows of traffic class 
			that can be configured for each priority. "
        DEFVAL      { 1 }
        ::= { gswQceConfEntry 21 }
        
 	qosToSP7Class OBJECT-TYPE
        SYNTAX      INTEGER {
                        low(1),
                        normal(2),
                        medium(3),
                        high(4)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "If the qosQceType is 'ToS', the class can be configured here.
            Select a traffic class of Low, Normal, Medium, or High to apply to the QCE.
			If the QCE type is ToS or Tag Priority, there are 8 rows of traffic class 
			that can be configured for each priority. "
        DEFVAL      { 1 }
        ::= { gswQceConfEntry 22 }
        
 	qosTagP0Class OBJECT-TYPE
        SYNTAX      INTEGER {
                        low(1),
                        normal(2),
                        medium(3),
                        high(4)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "If the qosQceType is 'Tag Priority', the class can be configured here.
            Select a traffic class of Low, Normal, Medium, or High to apply to the QCE.
			If the QCE type is ToS or Tag Priority, there are 8 rows of traffic class 
			that can be configured for each priority. "
        DEFVAL      { 1 }
        ::= { gswQceConfEntry 23 }

 	qosTagP1Class OBJECT-TYPE
        SYNTAX      INTEGER {
                        low(1),
                        normal(2),
                        medium(3),
                        high(4)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "If the qosQceType is 'Tag Priority', the class can be configured here.
            Select a traffic class of Low, Normal, Medium, or High to apply to the QCE.
			If the QCE type is ToS or Tag Priority, there are 8 rows of traffic class 
			that can be configured for each priority. "
        DEFVAL      { 1 }
        ::= { gswQceConfEntry 24 }
       
 	qosTagP2Class OBJECT-TYPE
        SYNTAX      INTEGER {
                        low(1),
                        normal(2),
                        medium(3),
                        high(4)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "If the qosQceType is 'Tag Priority', the class can be configured here.
            Select a traffic class of Low, Normal, Medium, or High to apply to the QCE.
			If the QCE type is ToS or Tag Priority, there are 8 rows of traffic class 
			that can be configured for each priority. "
        DEFVAL      { 1 }
        ::= { gswQceConfEntry 25 }
        
 	qosTagP3Class OBJECT-TYPE
        SYNTAX      INTEGER {
                        low(1),
                        normal(2),
                        medium(3),
                        high(4)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "If the qosQceType is 'Tag Priority', the class can be configured here.
            Select a traffic class of Low, Normal, Medium, or High to apply to the QCE.
			If the QCE type is ToS or Tag Priority, there are 8 rows of traffic class 
			that can be configured for each priority. "
        DEFVAL      { 1 }
        ::= { gswQceConfEntry 26 }
        
 	qosTagP4Class OBJECT-TYPE
        SYNTAX      INTEGER {
                        low(1),
                        normal(2),
                        medium(3),
                        high(4)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "If the qosQceType is 'Tag Priority', the class can be configured here.
            Select a traffic class of Low, Normal, Medium, or High to apply to the QCE.
			If the QCE type is ToS or Tag Priority, there are 8 rows of traffic class 
			that can be configured for each priority. "
        DEFVAL      { 1 }
        ::= { gswQceConfEntry 27 }
        
 	qosTagP5Class OBJECT-TYPE
        SYNTAX      INTEGER {
                        low(1),
                        normal(2),
                        medium(3),
                        high(4)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "If the qosQceType is 'Tag Priority', the class can be configured here.
            Select a traffic class of Low, Normal, Medium, or High to apply to the QCE.
			If the QCE type is ToS or Tag Priority, there are 8 rows of traffic class 
			that can be configured for each priority. "
        DEFVAL      { 1 }
        ::= { gswQceConfEntry 28 }
        
 	qosTagP6Class OBJECT-TYPE
        SYNTAX      INTEGER {
                        low(1),
                        normal(2),
                        medium(3),
                        high(4)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "If the qosQceType is 'Tag Priority', the class can be configured here.
            Select a traffic class of Low, Normal, Medium, or High to apply to the QCE.
			If the QCE type is ToS or Tag Priority, there are 8 rows of traffic class 
			that can be configured for each priority. "
        DEFVAL      { 1 }
        ::= { gswQceConfEntry 29 }
        
 	qosTagP7Class OBJECT-TYPE
        SYNTAX      INTEGER {
                        low(1),
                        normal(2),
                        medium(3),
                        high(4)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "If the qosQceType is 'Tag Priority', the class can be configured here.
            Select a traffic class of Low, Normal, Medium, or High to apply to the QCE.
			If the QCE type is ToS or Tag Priority, there are 8 rows of traffic class 
			that can be configured for each priority. "
        DEFVAL      { 1 }
        ::= { gswQceConfEntry 30 }
                
 	gswQoSRateLimitersTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF GswQoSRateLimitersEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "The QoS rate limiters configuration can be monitored here."
        ::= { faGswSnmpQoS 10 }

    gswQoSRateLimitersEntry OBJECT-TYPE
        SYNTAX      GswQoSRateLimitersEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "The Entry of QoS rate limiter."
        INDEX { gswChassisIndex, gswPortIndex }
        ::= { gswQoSRateLimitersTable 1 }

    GswQoSRateLimitersEntry ::=
        SEQUENCE {
        	qosPolicerEnabled        TruthValue,
        	qosPolicerRate           DisplayString,
            qosShaperEnabled         TruthValue,
        	qosShaperRate            DisplayString
        }
 
     qosPolicerEnabled OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Controls whether the policer is enabled on this switch port."
        ::= { gswQoSRateLimitersEntry 1 }
 
      qosPolicerRate OBJECT-TYPE
        SYNTAX      DisplayString
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Controls the rate for the policer. 1~1000Mbps or 500~1000000Kbps.
            Unit:
            M:Mbps
            K:Kbps
            "
        ::= { gswQoSRateLimitersEntry 2 }

     qosShaperEnabled OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Controls whether the shaper is enabled on this switch port."
        ::= { gswQoSRateLimitersEntry 3 }
 
      qosShaperRate OBJECT-TYPE
        SYNTAX      DisplayString
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Controls the rate for the shaper. 1~1000Mbps or 500~1000000Kbps.
            Unit:
            M:Mbps
            K:Kbps
            "
        ::= { gswQoSRateLimitersEntry 4 }
                
	gswQoSQueueCntTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF GswQoSQueueCntEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "The QoS queueing counter information can be monitored here."
        ::= { faGswSnmpQoS 11 }

    gswQoSQueueCntEntry OBJECT-TYPE
        SYNTAX      GswQoSQueueCntEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "The Entry of QoS queueing counter."
        INDEX { gswChassisIndex, gswPortIndex }
        ::= { gswQoSQueueCntTable 1 }

    GswQoSQueueCntEntry ::=
        SEQUENCE {
        	qosLowRx                 DisplayString,
        	qosNormalRx              DisplayString,
        	qosMediumRx              DisplayString,
        	qosHighRx                DisplayString,
        	qosLowTx	             DisplayString,    	
        	qosNormalTx	             DisplayString, 	
        	qosMediumTx	             DisplayString,	
        	qosHighTx	             DisplayString
        }
 
     qosLowRx OBJECT-TYPE
        SYNTAX      DisplayString
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "This is the receiving of lowest priority queue."
        ::= { gswQoSQueueCntEntry 1 }
        
      qosNormalRx OBJECT-TYPE
        SYNTAX      DisplayString
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "This is the receiving of normal priority queue."
        ::= { gswQoSQueueCntEntry 2 }

      qosMediumRx OBJECT-TYPE
        SYNTAX      DisplayString
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "This is the receiving of medium priority queue."
        ::= { gswQoSQueueCntEntry 3 }
        
      qosHighRx OBJECT-TYPE
        SYNTAX      DisplayString
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "This is the receiving of highest priority queue."
        ::= { gswQoSQueueCntEntry 4 }


     qosLowTx OBJECT-TYPE
        SYNTAX      DisplayString
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "This is the transmitting of lowest priority queue."
        ::= { gswQoSQueueCntEntry 5 }
        

     qosNormalTx OBJECT-TYPE
        SYNTAX      DisplayString
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "This is the transmitting of normal priority queue."
        ::= { gswQoSQueueCntEntry 6 }
        

     qosMediumTx OBJECT-TYPE
        SYNTAX      DisplayString
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "This is the transmitting of medium priority queue."
        ::= { gswQoSQueueCntEntry 7 }
        

     qosHighTx OBJECT-TYPE
        SYNTAX      DisplayString
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "This is the transmitting of highest priority queue."
        ::= { gswQoSQueueCntEntry 8 }
        
    gswQosCntClear OBJECT-TYPE
        SYNTAX      INTEGER {
                        trigger(1),
                        normal(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Clears the counters for all ports."
        DEFVAL      { 2 }
        ::= { faGswSnmpQoS 12 }
        
-- Mirror
    gswPortToMirrorOn OBJECT-TYPE
        SYNTAX      INTEGER {
                        disabled(1),
                        p1(2),
                        p2(3),
                        p3(4),
                        p4(5),
                        p5(6),
                        p6(7),
                        p7(8),
                        p8(9),
                        p9(10),
                        p10(11),
                        p11(12),
                        p12(13),
                        p13(14),
                        p14(15),
                        p15(16),
                        p16(17),
                        p17(18),
                        p18(19),
                        p19(20),
                        p20(21),
                        p21(22),
                        p22(23),
                        p23(24),
                        p24(25),
                        p25(26),
                        p26(27),
                        p27(28),
                        p28(29)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Port to mirror also known as the mirror port.
             Frames from ports that have either source(rx) or destination(tx)
             mirroring enabled are mirrored on this port.
             Sets zero to disables mirroring."
        ::= { faGswSnmpMirror 1 }

    gswPortMirrorTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF GswPortMirrorEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This table is used for Rx and Tx enabling."
        ::= { faGswSnmpMirror 2 }

    gswPortMirrorEntry OBJECT-TYPE
        SYNTAX      GswPortMirrorEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "The Entry of mirroring ports."
        INDEX { gswChassisIndex, gswPortIndex }
        ::= { gswPortMirrorTable 1 }

    GswPortMirrorEntry ::=
        SEQUENCE {
            mirrPortMirrorMode          INTEGER
        }
  
        mirrPortMirrorMode OBJECT-TYPE
            SYNTAX      INTEGER {
                            disabled(1),
                            enabled(2),
                            rxOnly(3),
                            txOnly(4)
                        }
            MAX-ACCESS  read-write
            STATUS      current
            DESCRIPTION
                "Select mirror mode.
                 Rx only: Frames received on this port are mirrored on the mirror port.
                          Frames transmitted are not mirrored.
                 Tx only: Frames transmitted on this port are mirrored on the mirror port.
                          Frames received are not mirrored.
                 Disabled: Neither frames transmitted nor frames received are mirrored.
                 Enabled: Frames received and frames transmitted are mirrored on the mirror port. 
                 Note: For a given port, a frame is only transmitted once.
                 It is therefore not possible to mirror Tx frames on the mirror port.
                 Because of this, mode for the selected mirror port is limited to Disabled or Rx only."
            ::= { gswPortMirrorEntry 1 }
                                               
-- TRAPs

alarmModeChange  NOTIFICATION-TYPE
    STATUS    current
    DESCRIPTION
        "Trap issued when alarm mode is changed."
    ::= { faGswSnmpTraps 100 }

login  NOTIFICATION-TYPE
    STATUS    current
    DESCRIPTION
        "Trap issued when somebody log in or log out system."
    ::= { faGswSnmpTraps 110 }

stackDetect  NOTIFICATION-TYPE
    STATUS    current
    DESCRIPTION
        "Trap issued when slave chassis stack in or stack out system."
    ::= { faGswSnmpTraps 120 }

lineCardDetect	NOTIFICATION-TYPE
    STATUS    current
    DESCRIPTION
        "Trap issued when a line card pluged or unpluged."
    ::= { faGswSnmpTraps 130 }

powerStatus  NOTIFICATION-TYPE
    STATUS    current
    DESCRIPTION
        "Trap issued when power 1 or 2 status is changed."
    ::= { faGswSnmpTraps 140 }

fanStatus  NOTIFICATION-TYPE
    STATUS    current
    DESCRIPTION
        "Trap issued when fan 1 or 2 is status is changed."
    ::= { faGswSnmpTraps 150 }

alarmByDefine1  NOTIFICATION-TYPE
    STATUS    current
    DESCRIPTION
        "Trap issued when an alarm is triggered by user define 1."
    ::= { faGswSnmpTraps 160 }

alarmByDefine2  NOTIFICATION-TYPE
    STATUS    current
    DESCRIPTION
        "Trap issued when an alarm is triggered by user define 2."
    ::= { faGswSnmpTraps 170 }
   
alarmDefaults  NOTIFICATION-TYPE
    STATUS    current
    DESCRIPTION
        "Trap issued when reset system parameters."
    ::= { faGswSnmpTraps 180 }

alarmRestore  NOTIFICATION-TYPE
    STATUS    current
    DESCRIPTION
        "Trap issued when Restore system parameters."
    ::= { faGswSnmpTraps 190 }

-- 4E1/ET100
fa4e1et100Project OBJECT IDENTIFIER ::= { faGswSnmp 7400 }

fa4e1et100Cards  OBJECT IDENTIFIER ::= { fa4e1et100Project 1 }

	fa4e1et100Table  OBJECT-TYPE
        SYNTAX  SEQUENCE OF Fa4e1et100Entry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "A list of 4E1-ET100(T/S) series card entries."
		::= { fa4e1et100Cards 1 }
		
	fa4e1et100Entry  OBJECT-TYPE
		SYNTAX  Fa4e1et100Entry
		MAX-ACCESS  not-accessible
		STATUS  current
		DESCRIPTION
			"An entry containing management information applicable
			to a particular 4E1-ET100(T/S) series card."
		INDEX  { fa4e1et100ChassisIndex, fa4e1et100SlotIndex, fa4e1et100SideIndex }
		::= { fa4e1et100Table 1 }
		
	fa4e1et100VlanTable  OBJECT-TYPE
        SYNTAX  SEQUENCE OF Fa4e1et100VlanEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "A list of 4E1-ET100(T/S) series vlan trunking."
		::= { fa4e1et100Cards 2 }		
	
	fa4e1et100VlanEntry  OBJECT-TYPE
		SYNTAX  Fa4e1et100VlanEntry
		MAX-ACCESS  not-accessible
		STATUS  current
		DESCRIPTION
			"An entry containing vlan trunking applicable
			to a particular 4E1-ET100(T/S) series card."
		INDEX  { fa4e1et100VlanChassisIndex, fa4e1et100VlanSlotIndex, fa4e1et100VlanSideIndex }
		::= { fa4e1et100VlanTable 1 }
		
	Fa4e1et100Entry ::= 
		SEQUENCE {
			fa4e1et100ChassisIndex      Integer32,
            fa4e1et100SlotIndex         Integer32,
            fa4e1et100SideIndex         INTEGER,
            fa4e1et100CardHWVer         DisplayString,
            fa4e1et100CardFWVer         DisplayString,
            fa4e1et100CardCPLDVer       DisplayString,
            fa4e1et100CardFPGAVer       DisplayString,
            fa4e1et100Model             INTEGER,
            fa4e1et100SystemStatus      INTEGER,
            fa4e1et100DeviceActive	    INTEGER,
            fa4e1et100SetToDefault      INTEGER,
            
            fa4e1et100E1Ch1Singal       INTEGER,
            fa4e1et100E1Ch2Singal       INTEGER,
            fa4e1et100E1Ch3Singal       INTEGER,
            fa4e1et100E1Ch4Singal       INTEGER,
            
            fa4e1et100E1Ch1Sync         INTEGER,
            fa4e1et100E1Ch2Sync         INTEGER,
            fa4e1et100E1Ch3Sync         INTEGER,
            fa4e1et100E1Ch4Sync         INTEGER,
            
            fa4e1et100E1Ch1RecvAIS      INTEGER,
            fa4e1et100E1Ch2RecvAIS      INTEGER,
            fa4e1et100E1Ch3RecvAIS      INTEGER,
            fa4e1et100E1Ch4RecvAIS      INTEGER,

            fa4e1et100E1Ch1ConnType     INTEGER,
            fa4e1et100E1Ch2ConnType     INTEGER,
            fa4e1et100E1Ch3ConnType     INTEGER,
            fa4e1et100E1Ch4ConnType     INTEGER,

            fa4e1et100E1Ch1RAI          INTEGER,
            fa4e1et100E1Ch2RAI          INTEGER,
            fa4e1et100E1Ch3RAI          INTEGER,
            fa4e1et100E1Ch4RAI          INTEGER,

            fa4e1et100E1Ch1LOMF         INTEGER,
            fa4e1et100E1Ch2LOMF         INTEGER,
            fa4e1et100E1Ch3LOMF         INTEGER,
            fa4e1et100E1Ch4LOMF         INTEGER,

            fa4e1et100E1Ch1Active       INTEGER,
            fa4e1et100E1Ch2Active       INTEGER,
            fa4e1et100E1Ch3Active       INTEGER,
            fa4e1et100E1Ch4Active       INTEGER,
            
            fa4e1et100E1Ch1LoopBack     INTEGER,
            fa4e1et100E1Ch2LoopBack     INTEGER,
            fa4e1et100E1Ch3LoopBack     INTEGER,
            fa4e1et100E1Ch4LoopBack     INTEGER,
 
			fa4e1et100FxLink            INTEGER,
            fa4e1et100FxLaser           INTEGER,
            fa4e1et100FxActive          INTEGER,
            fa4e1et100FxLaserOutput     INTEGER,
            fa4e1et100FxOpMode          INTEGER,
            
            fa4e1et100UtpLink           INTEGER,
            fa4e1et100UtpStatus         INTEGER,
            fa4e1et100UtpFlowCtrlSts    INTEGER,
            fa4e1et100UtpMode           INTEGER,
            fa4e1et100UtpFlowCtrl       INTEGER,
            
            fa4e1et100SpeedLimit        Integer32,
            fa4e1et100VlanAware         INTEGER,
            fa4e1et100VlanID            Integer32,
            
            fa4e1et100RemoteDevice      INTEGER,
            fa4e1et100RemotePower       INTEGER,
            
            fa4e1et100TimingSource      INTEGER,
            fa4e1et100FCSofGFP          INTEGER,
            fa4e1et100AutoChAdjust      INTEGER,
            fa4e1et100PayloadScramble   INTEGER,
            fa4e1et100Failover          INTEGER,
            
            fa4e1et100LOM               INTEGER,
            fa4e1et100SQM               INTEGER,
            fa4e1et100CRC               INTEGER,
            fa4e1et100LOA               INTEGER,
            fa4e1et100LFD               INTEGER,
            fa4e1et100DDTO              INTEGER,
            
            fa4e1et100VcatMember1       INTEGER,
            fa4e1et100VcatMember2       INTEGER,
            fa4e1et100VcatMember3       INTEGER,
            fa4e1et100VcatMember4       INTEGER,
            
            fa4e1et100SnmpChannel1      INTEGER,
            fa4e1et100SnmpChannel2      INTEGER,
            fa4e1et100SnmpChannel3      INTEGER,
            fa4e1et100SnmpChannel4      INTEGER,
            
            fa4e1et100ErrSec            Counter32,
            fa4e1et100ErrFreeSec        Counter32,
            fa4e1et100ServErrSec        Counter32,
            fa4e1et100BertFunction      INTEGER,
            fa4e1et100ClrBertData       INTEGER,
            fa4e1et100BertE1Channel     INTEGER,
            
            fa4e1et100RmonFunction      INTEGER,
            fa4e1et100RmonTx            DisplayString,
            fa4e1et100RmonRx            DisplayString,
            fa4e1et100ClrRmonTx         INTEGER,
            fa4e1et100ClrRmonRx         INTEGER,
            
            fa4e1et100Sfp               INTEGER,
            fa4e1et100SfpVendor         DisplayString,
            fa4e1et100SfpPartNo         DisplayString,
            fa4e1et100SfpFiberType      INTEGER,
            fa4e1et100SfpTxWaveLen      DisplayString,
            fa4e1et100SfpRxWaveLen      DisplayString,
            fa4e1et100SfpLinkLen        DisplayString,
            fa4e1et100SfpModelID        DisplayString,
            fa4e1et100SfpVersion        DisplayString,
            fa4e1et100SfpModelType      DisplayString,
            
            fa4e1et100DDInformation     INTEGER,
            fa4e1et100DDTxPower         DisplayString,
            fa4e1et100DDRxPower         DisplayString,
            fa4e1et100DDRxSens          DisplayString,
            fa4e1et100DDTemp            DisplayString,
            fa4e1et100DDBias            DisplayString,
            fa4e1et100DDVoltage         DisplayString,

            fa4e1et100ChannelDefect      INTEGER,
            fa4e1et100LoopDetection      INTEGER,
            
            fa4e1et100LoopCh1      INTEGER,
            fa4e1et100LoopCh2      INTEGER,
            fa4e1et100LoopCh3      INTEGER,
            fa4e1et100LoopCh4      INTEGER,
            
            fa4e1et100DefectCh1      INTEGER,
            fa4e1et100DefectCh2      INTEGER,
            fa4e1et100DefectCh3      INTEGER,
            fa4e1et100DefectCh4      INTEGER,
            
            fa4e1et100FxSignal       INTEGER,
            
            fa4e1et100VlanMode		 INTEGER
     		}

	  fa4e1et100ChassisIndex OBJECT-TYPE
            SYNTAX  Integer32 (0..9)
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "A unique value for each card.
                It starts from 0 to 9 contiguously."
            ::= { fa4e1et100Entry 1 }

        fa4e1et100SlotIndex OBJECT-TYPE
            SYNTAX  Integer32 (1..20)
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "A unique value for each card.
                It starts from 1 to 20 contiguously."
            ::= { fa4e1et100Entry 2 }

        fa4e1et100SideIndex OBJECT-TYPE
            SYNTAX  INTEGER {
                local(1),
                remoteA(2),
                remoteB(3),
                remoteC(4),
                remoteD(5)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "A unique value for each card. It is the card location:
                1:Local area
                2:Remote A or Remote area
                3:Remote B area
                4:Remote C area
                5:Remote D area"
            ::= { fa4e1et100Entry 3 }

        fa4e1et100CardHWVer OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card hardware version x.xxx"
            ::= { fa4e1et100Entry 4 }

        fa4e1et100CardFWVer OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card firmware version x.xxx"
            ::= { fa4e1et100Entry 5 }

        fa4e1et100CardCPLDVer OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card CPLD version x.xxx"
            ::= { fa4e1et100Entry 6 }

        fa4e1et100CardFPGAVer OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card FPGA version x.xxx"
            ::= { fa4e1et100Entry 7 }

        fa4e1et100Model  OBJECT-TYPE
            SYNTAX  INTEGER {
                fa4E1Et100T(7400),
                fa4E1Et100S(7500)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "Card Type:
                7400:4E1-ET100T
                7500:4E1-ET100S"
            ::= { fa4e1et100Entry 8 }
            
		fa4e1et100SystemStatus  OBJECT-TYPE
            SYNTAX  INTEGER {
                normal(1),
                alarm(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card system status:
                1:Normal
                2:Alarm"
	        ::= { fa4e1et100Entry 9 }

        fa4e1et100DeviceActive  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card active:
                1:Disable 
                2:Enable"
            ::= { fa4e1et100Entry 10 }
        
		fa4e1et100SetToDefault  OBJECT-TYPE
            SYNTAX  INTEGER {
                off(1),
                act(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card port set to default:
                1:Off
                2:Trigger"
            ::= { fa4e1et100Entry 12 }

        fa4e1et100E1Ch1Singal  OBJECT-TYPE
            SYNTAX  INTEGER {
                singalLoss(1),
                normal(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card E1 channel 1 signal status:
                1:Singal Loss
                2:Normal"
            ::= { fa4e1et100Entry 13 }

        fa4e1et100E1Ch2Singal  OBJECT-TYPE
            SYNTAX  INTEGER {
                singalLoss(1),
                normal(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card E1 channel 2 signal status:
                1:Singal Loss
                2:Normal"
            ::= { fa4e1et100Entry 14 }

        fa4e1et100E1Ch3Singal  OBJECT-TYPE
            SYNTAX  INTEGER {
                singalLoss(1),
                normal(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card E1 channel 3 signal status:
                1:Singal Loss
                2:Normal"
            ::= { fa4e1et100Entry 15 }

        fa4e1et100E1Ch4Singal  OBJECT-TYPE
            SYNTAX  INTEGER {
                singalLoss(1),
                normal(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card E1 channel 4 signal status:
                1:Singal Loss
                2:Normal"
            ::= { fa4e1et100Entry 16 }
	
		fa4e1et100E1Ch1Sync  OBJECT-TYPE
            SYNTAX  INTEGER {
                syncLoss(1),
                sync(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card E1 channel 1 sync status:
                1:Sync Loss
                2:Sync"
            ::= { fa4e1et100Entry 18 }

        fa4e1et100E1Ch2Sync  OBJECT-TYPE
            SYNTAX  INTEGER {
                syncLoss(1),
                sync(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card E1 channel 2 sync status:
                1:Sync Loss
                2:Sync"
            ::= { fa4e1et100Entry 19 }

        fa4e1et100E1Ch3Sync  OBJECT-TYPE
            SYNTAX  INTEGER {
                syncLoss(1),
                sync(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card E1 channel 3 sync status:
                1:Sync Loss
                2:Sync"
            ::= { fa4e1et100Entry 20 }

        fa4e1et100E1Ch4Sync  OBJECT-TYPE
            SYNTAX  INTEGER {
                syncLoss(1),
                sync(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card E1 channel 4 sync status:
                1:Sync Loss
                2:Sync"
            ::= { fa4e1et100Entry 21 }
            
 		fa4e1et100E1Ch1RecvAIS  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card E1 channel 1 receive AIS status:
                1:No
                2:Yes"
            ::= { fa4e1et100Entry 23 }

        fa4e1et100E1Ch2RecvAIS  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card E1 channel 2 receive AIS status:
                1:No
                2:Yes"
            ::= { fa4e1et100Entry 24 }

        fa4e1et100E1Ch3RecvAIS  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card E1 channel 3 receive AIS status:
                1:No
                2:Yes"
            ::= { fa4e1et100Entry 25 }

        fa4e1et100E1Ch4RecvAIS  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card E1 channel 4 receive AIS status:
                1:No
                2:Yes"
            ::= { fa4e1et100Entry 26 }
            
		fa4e1et100E1Ch1ConnType  OBJECT-TYPE
            SYNTAX  INTEGER {
                rj48c(1),
                bnc(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card E1 channel 1 connector type:
                1:RJ-48C
                2:BNC"
            ::= { fa4e1et100Entry 28 }

        fa4e1et100E1Ch2ConnType  OBJECT-TYPE
            SYNTAX  INTEGER {
                rj48c(1),
                bnc(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card E1 channel 2 connector type:
                1:RJ-48C
                2:BNC"
            ::= { fa4e1et100Entry 29 }

        fa4e1et100E1Ch3ConnType  OBJECT-TYPE
            SYNTAX  INTEGER {
                rj48c(1),
                bnc(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card E1 channel 3 connector type:
                1:RJ-48C
                2:BNC"
            ::= { fa4e1et100Entry 30 }

        fa4e1et100E1Ch4ConnType  OBJECT-TYPE
            SYNTAX  INTEGER {
                rj48c(1),
                bnc(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card E1 channel 4 connector type:
                1:RJ-48C
                2:BNC"
            ::= { fa4e1et100Entry 31 }

        fa4e1et100E1Ch1RAI  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card E1 channel 1 RAI status:
                1:No
                2:Yes"
            ::= { fa4e1et100Entry 33 }

        fa4e1et100E1Ch2RAI  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card E1 channel 2 RAI status:
                1:No
                2:Yes"
            ::= { fa4e1et100Entry 34 }

        fa4e1et100E1Ch3RAI  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card E1 channel 3 RAI status:
                1:No
                2:Yes"
            ::= { fa4e1et100Entry 35 }

        fa4e1et100E1Ch4RAI  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card E1 channel 4 RAI status:
                1:No
                2:Yes"
            ::= { fa4e1et100Entry 36 }

        fa4e1et100E1Ch1LOMF  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card E1 channel 1 LOMF status:
                1:No
                2:Yes"
            ::= { fa4e1et100Entry 38 }

        fa4e1et100E1Ch2LOMF  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card E1 channel 2 LOMF status:
                1:No
                2:Yes"
            ::= { fa4e1et100Entry 39 }

        fa4e1et100E1Ch3LOMF  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card E1 channel 3 LOMF status:
                1:No
                2:Yes"
            ::= { fa4e1et100Entry 40 }

        fa4e1et100E1Ch4LOMF  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card E1 channel 4 LOMF status:
                1:No
                2:Yes"
            ::= { fa4e1et100Entry 41 }

        fa4e1et100E1Ch1Active  OBJECT-TYPE
            SYNTAX  INTEGER {
                inactive(1),
                active(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card E1 channel 1 active status:
                1:Inactive
                2:Active"
            ::= { fa4e1et100Entry 43 }

        fa4e1et100E1Ch2Active  OBJECT-TYPE
            SYNTAX  INTEGER {
                inactive(1),
                active(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card E1 channel 2 active status:
                1:Inactive
                2:Active"
            ::= { fa4e1et100Entry 44 }

        fa4e1et100E1Ch3Active  OBJECT-TYPE
            SYNTAX  INTEGER {
                inactive(1),
                active(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card E1 channel 3 active status:
                1:Inactive
                2:Active"
            ::= { fa4e1et100Entry 45 }

        fa4e1et100E1Ch4Active  OBJECT-TYPE
            SYNTAX  INTEGER {
                inactive(1),
                active(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card E1 channel 4 active status:
                1:Inactive
                2:Active"
            ::= { fa4e1et100Entry 46 }
            
		fa4e1et100E1Ch1LoopBack  OBJECT-TYPE
            SYNTAX  INTEGER {
                off(1),
                rlb(3)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card port E1 channel 1 loop back:
                1:Off
                3:RLB (Max used 4 channels)"
            ::= { fa4e1et100Entry 48 }

        fa4e1et100E1Ch2LoopBack  OBJECT-TYPE
            SYNTAX  INTEGER {
                off(1),
                rlb(3)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card port E1 channel 2 loop back:
                1:Off
                3:RLB (Max used 4 channels)"
            ::= { fa4e1et100Entry 49 }

        fa4e1et100E1Ch3LoopBack  OBJECT-TYPE
            SYNTAX  INTEGER {
                off(1),
                rlb(3)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card port E1 channel 3 loop back:
                1:Off
                3:RLB (Max used 4 channels)"
            ::= { fa4e1et100Entry 50 }

        fa4e1et100E1Ch4LoopBack  OBJECT-TYPE
            SYNTAX  INTEGER {
                off(1),
                rlb(3)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card port E1 channel 4 loop back:
                1:Off
                3:RLB (Max used 4 channels)"
            ::= { fa4e1et100Entry 51 }
            
		fa4e1et100FxLink  OBJECT-TYPE
            SYNTAX  INTEGER {
                linkDown(1),
                linkUp(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100S Series card Fiber siganl detect status:
                1:Link down or Fiber unplugged
                2:Link up or Singal detected"
            ::= { fa4e1et100Entry 53 }

        fa4e1et100FxLaser  OBJECT-TYPE
            SYNTAX  INTEGER {
                normal(1),
                error(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100S Series card laser status:
                1:Normal
                2:Error"
            ::= { fa4e1et100Entry 54 }
            
		fa4e1et100FxActive  OBJECT-TYPE
            SYNTAX  INTEGER {
                inactive(1),
                active(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "4E1-ET100S Series card Fiber active:
                1:Inactive
                2:Active"
            ::= { fa4e1et100Entry 55 }

        fa4e1et100FxLaserOutput  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "4E1-ET100S Series card laser output:
                1:disable
                2:Enable"
            ::= { fa4e1et100Entry 56 }

        fa4e1et100FxOpMode  OBJECT-TYPE
            SYNTAX  INTEGER {
                switch(1),
                convert(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "4E1-ET100S Series card operation mode:
                1:Switch
                2:Convert"
            ::= { fa4e1et100Entry 57 }
            
		fa4e1et100UtpLink  OBJECT-TYPE
            SYNTAX  INTEGER {
                linkDown(1),
                linkUp(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100T Series card UTP link status:
                1:Link Down
                2:Link Up"
            ::= { fa4e1et100Entry 58 }

        fa4e1et100UtpStatus  OBJECT-TYPE
            SYNTAX  INTEGER {
                none(1),
                link10MbpsHDX(2),
                link10MbpsFDX(3),
                link100MbpsHDX(4),
                link100MbpsFDX(5)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100T Series card UTP link mode status:
                1:None, Maybe link down
                2:Link at 10Mbps, Half duplex
                3:Link at 10Mbps, Full duplex
                4:Link at 100Mbps, Half duplex
                5:Link at 100Mbps, Full duplex"
            ::= { fa4e1et100Entry 59 }

        fa4e1et100UtpFlowCtrlSts  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100T Series card UTP flow control status:
                1:Disable
                2:Enable"
            ::= { fa4e1et100Entry 60 }

        fa4e1et100UtpMode  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                autoNegotiation(2),
                force10MbpsHDX(3),
                force10MbpsFDX(4),
                force100MbpsHDX(5),
                force100MbpsFDX(6)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "4E1-ET100T) Series card UTP mode:
                1:Disable
                2:Enable and autoNegotiation
                3:Enable and force to 10Mbps, Half duplex
                4:Enable and force to 10Mbps, Full duplex
                5:Enable and force to 100Mbps, Half duplex
                6:Enable and force to 100Mbps, Full duplex"
            ::= { fa4e1et100Entry 61 }

        fa4e1et100UtpFlowCtrl  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "4E1-ET100T Series card UTP flow control:
                1:Disable
                2:Enable"
            ::= { fa4e1et100Entry 62 }
            
		fa4e1et100SpeedLimit  OBJECT-TYPE
            SYNTAX  Integer32 (0..3125)
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card speed limit:
                Limited = this value * 32Kbps,
                this value is restricted to 0 ~ 3125, 0 to disable"
            ::= { fa4e1et100Entry 63 }

        fa4e1et100VlanAware  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card 802.1q VLAN tag aware:
                1:Disable
                2:Enable"
            ::= { fa4e1et100Entry 64 }

        fa4e1et100VlanID  OBJECT-TYPE
            SYNTAX  Integer32 (1..4094)
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card VLAN ID:
                The ID is restricted to 1 ~ 4094"
            ::= { fa4e1et100Entry 65 }
            
		fa4e1et100RemoteDevice  OBJECT-TYPE
            SYNTAX  INTEGER {
                linkDown(1),
                linkUp(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "MMP001A-4E1 Series card remote device status:
                1:Link Down
                2:Link Up"
            ::= { fa4e1et100Entry 66 }

        fa4e1et100RemotePower  OBJECT-TYPE
            SYNTAX  INTEGER {
                normal(1),
                off(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card remote device power status:
                1:Normal
                2:Power off"
            ::= { fa4e1et100Entry 67 }
            
		fa4e1et100TimingSource  OBJECT-TYPE
            SYNTAX  INTEGER {
                recoveryFromE1Channel1(1),
                recoveryFromE1Channel2(2),
                recoveryFromE1Channel3(3),
                recoveryFromE1Channel4(4),
                internalOscillator(5)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card clock:
                1:Recovery from E1 channel 1
                2:Recovery from E1 channel 2
                3:Recovery from E1 channel 3
                4:Recovery from E1 channel 4
                5:Internal oscillatro"
            ::= { fa4e1et100Entry 68 }

        fa4e1et100FCSofGFP  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card FCS of GFP:
                1:Disable
                2:Enable"
            ::= { fa4e1et100Entry 69 }
            
		fa4e1et100AutoChAdjust  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card auto channel Bdjust:
                1:Disable
                2:Enable"
            ::= { fa4e1et100Entry 70 }

        fa4e1et100PayloadScramble  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card payload scramble:
                1:Disable
                2:Enable"
            ::= { fa4e1et100Entry 71 }

      fa4e1et100Failover  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card failover:
                1:Disable
                2:Enable"
            ::= { fa4e1et100Entry 72 }

		fa4e1et100LOM  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card LOM status:
                1:No
                2:Yes"
            ::= { fa4e1et100Entry 73 }

        fa4e1et100SQM  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card SQM status:
                1:No
                2:Yes"
            ::= { fa4e1et100Entry 74 }

        fa4e1et100CRC  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card CRC status:
                1:No
                2:Yes"
            ::= { fa4e1et100Entry 75 }

        fa4e1et100LOA  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card LOA status:
                1:No
                2:Yes"
            ::= { fa4e1et100Entry 76 }

        fa4e1et100LFD  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card LFD status:
                1:No
                2:Yes"
            ::= { fa4e1et100Entry 77 }

        fa4e1et100DDTO  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card DDTO status:
                1:No
                2:Yes"
            ::= { fa4e1et100Entry 78 }
            
		fa4e1et100VcatMember1  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card VACT member 1:
                1:Disable
                2:Enable"
            ::= { fa4e1et100Entry 79 }

        fa4e1et100VcatMember2  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card VACT member 2:
                1:Disable
                2:Enable"
            ::= { fa4e1et100Entry 80 }

        fa4e1et100VcatMember3  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card VACT member 3:
                1:Disable
                2:Enable"
            ::= { fa4e1et100Entry 81 }

        fa4e1et100VcatMember4  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card VACT member 4:
                1:Disable
                2:Enable"
            ::= { fa4e1et100Entry 82 }
            
		fa4e1et100SnmpChannel1  OBJECT-TYPE
            SYNTAX  INTEGER {
                noUse(1),
                use(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card SNMP channel 1:
                1:No use
                2:Use"
            ::= { fa4e1et100Entry 84 }

        fa4e1et100SnmpChannel2  OBJECT-TYPE
            SYNTAX  INTEGER {
                noUse(1),
                use(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card SNMP channel 2:
                1:No use
                2:Use"
            ::= { fa4e1et100Entry 85 }

        fa4e1et100SnmpChannel3  OBJECT-TYPE
            SYNTAX  INTEGER {
                noUse(1),
                use(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card SNMP channel 3:
                1:No use
                2:Use"
            ::= { fa4e1et100Entry 86 }

        fa4e1et100SnmpChannel4  OBJECT-TYPE
            SYNTAX  INTEGER {
                noUse(1),
                use(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card SNMP channel 4:
                1:No use
                2:Use"
            ::= { fa4e1et100Entry 87 }
            
		fa4e1et100ErrSec  OBJECT-TYPE
            SYNTAX  Counter32
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card, errored seconds of BERT result."
            ::= { fa4e1et100Entry 89 }

        fa4e1et100ErrFreeSec  OBJECT-TYPE
            SYNTAX  Counter32
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card, errored free seconds of BERT result."
            ::= { fa4e1et100Entry 90 }

        fa4e1et100ServErrSec  OBJECT-TYPE
            SYNTAX  Counter32
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card, severely errored seconds of BERT result."
            ::= { fa4e1et100Entry 91 }

        fa4e1et100BertFunction  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card bert function:
                1:Disable
                2:Enable"
            ::= { fa4e1et100Entry 92 }
            
		fa4e1et100ClrBertData  OBJECT-TYPE
            SYNTAX  INTEGER {
                normal(1),
                clear(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card bert data clear:
                1:Normal
                2:Clear"
            ::= { fa4e1et100Entry 93 }

        fa4e1et100BertE1Channel  OBJECT-TYPE
            SYNTAX  INTEGER {
                e1Channel1(1),
                e1Channel2(2),
                e1Channel3(3),
                e1Channel4(4)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card bert E1 channel number:
                1:E1 channel 1
                2:E1 channel 2
                3:E1 channel 3
                4:E1 channel 4"
            ::= { fa4e1et100Entry 94 }

		fa4e1et100RmonFunction  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series RMON function :
                1:Disable
                2:Enable"
            ::= { fa4e1et100Entry 95 }

        fa4e1et100RmonTx  OBJECT-TYPE
        SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card RMON Tx counter."
            ::= { fa4e1et100Entry 96 }

        fa4e1et100RmonRx  OBJECT-TYPE
        SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card RMON Rx counter."
            ::= { fa4e1et100Entry 97 }

        fa4e1et100ClrRmonTx  OBJECT-TYPE
            SYNTAX  INTEGER {
                normal(1),
                clear(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card clear RMON Tx counter:
                1:Normal
                1:Clear"
            ::= { fa4e1et100Entry 98 }

        fa4e1et100ClrRmonRx  OBJECT-TYPE
            SYNTAX  INTEGER {
                normal(1),
                clear(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card clear RMON Rx counter:
                1:Normal
                1:Clear"
            ::= { fa4e1et100Entry 99 }
        
        fa4e1et100Sfp  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card, SFP existed:
                1:No
                2:Yes"
            ::= { fa4e1et100Entry 100 }

        fa4e1et100SfpVendor  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card, Vendor name of SFP."
            ::= { fa4e1et100Entry 101 }

        fa4e1et100SfpPartNo  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card, Vendor part number of SFP."
            ::= { fa4e1et100Entry 102}

        fa4e1et100SfpFiberType  OBJECT-TYPE
            SYNTAX  INTEGER{
                unknow(1),
                single(2),
                multi(3)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card, Fiber Type of SFP."
            ::= { fa4e1et100Entry 103 }

        fa4e1et100SfpTxWaveLen  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card, Tx Wave length of SFP."
            ::= { fa4e1et100Entry 104 }

        fa4e1et100SfpRxWaveLen  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card, Rx Wave length of SFP."
            ::= { fa4e1et100Entry 105 }

        fa4e1et100SfpLinkLen  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card, Link length of SFP."
            ::= { fa4e1et100Entry 106 }

        fa4e1et100SfpModelID  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card, model ID of SFP."
            ::= { fa4e1et100Entry 107}

        fa4e1et100SfpVersion  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card, the version of SFP."
            ::= { fa4e1et100Entry 108}

        fa4e1et100SfpModelType  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card, model type of SFP."
            ::= { fa4e1et100Entry 109}
            
		fa4e1et100DDInformation  OBJECT-TYPE
            SYNTAX  INTEGER{
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card, D/D information of SFP Supported:
                1:No,
                2:Yes"
            ::= { fa4e1et100Entry 110 }

        fa4e1et100DDTxPower  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card, Tx power of D/D information."
            ::= { fa4e1et100Entry 111 }

        fa4e1et100DDRxPower  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card, Rx power of D/D information."
            ::= { fa4e1et100Entry 112 }

        fa4e1et100DDRxSens  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card, Sensitivity of D/D information."
            ::= { fa4e1et100Entry 113 }

        fa4e1et100DDTemp  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card, Temperature of D/D information in degree C."
            ::= { fa4e1et100Entry 114 }

        fa4e1et100DDBias  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card, BIAS of D/D information."
            ::= { fa4e1et100Entry 115 }

        fa4e1et100DDVoltage  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card, Voltage of D/D information."
            ::= { fa4e1et100Entry 116}

       fa4e1et100ChannelDefect  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                set-1E-4(4),
                set-1E-6(6)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card Channel Defect:
                1:Disable
                4:1E-4
                6:1E-6"
            ::= { fa4e1et100Entry 117 } 
 
        fa4e1et100LoopDetection  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card Loop Detection:
                1:Disable
                2:Enable
                "
            ::= { fa4e1et100Entry 118 }             
            
        fa4e1et100LoopCh1  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card E1 channel 1 Loop Check State:
                1:No
                2:Yes"
            ::= { fa4e1et100Entry 119 }            

        fa4e1et100LoopCh2  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card E1 channel 2 Loop Check State:
                1:No
                2:Yes"
            ::= { fa4e1et100Entry 120 } 
            
        fa4e1et100LoopCh3  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card E1 channel 3 Loop Check State:
                1:No
                2:Yes"
            ::= { fa4e1et100Entry 121 } 
            
        fa4e1et100LoopCh4  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card E1 channel 4 Loop Check State:
                1:No
                2:Yes"
            ::= { fa4e1et100Entry 122 }  
            
        fa4e1et100DefectCh1  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card E1 channel 1 Defect Status:
                1:No
                2:Yes"
            ::= { fa4e1et100Entry 124 }            

        fa4e1et100DefectCh2  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card E1 channel 2 Defect Status:
                1:No
                2:Yes"
            ::= { fa4e1et100Entry 125 }    
            
        fa4e1et100DefectCh3  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card E1 channel 3 Defect Status:
                1:No
                2:Yes"
            ::= { fa4e1et100Entry 126 }    
            
        fa4e1et100DefectCh4  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card E1 channel 4 Defect Status:
                1:No
                2:Yes"
            ::= { fa4e1et100Entry 127 }    
             

         fa4e1et100FxSignal  OBJECT-TYPE
            SYNTAX  INTEGER {
                unplugged(1),
                detected(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "4E1-ET100(T/S) Series card Fiber signal detect(SD):
                1:Fiber unplugged
                2:Signal detected"
            ::= { fa4e1et100Entry 129 }
            
		fa4e1et100VlanMode	 OBJECT-TYPE
			SYNTAX  INTEGER {
                mode2(1),
                mode1(2)
            }
            MAX-ACCESS  read-write
            STATUS	current
            DESCRIPTION
            	"4E1-ET100(T/S) Series card Vlan Mode Setting:
            	1:Vlan Mode 2
            	2:Vlan Mode 1"
            ::= { fa4e1et100Entry 130}
            
		Fa4e1et100VlanEntry ::=
           SEQUENCE {
               fa4e1et100VlanChassisIndex	 Integer32,
               fa4e1et100VlanSlotIndex		 Integer32,
               fa4e1et100VlanSideIndex       INTEGER,
               
               fa4e1et100VlanEntryIndex	     INTEGER,
               fa4e1et100VlanTag             INTEGER,
               
               fa4e1et100Vlan0				 Integer32,
               fa4e1et100Vlan1               Integer32,
               fa4e1et100Vlan2               Integer32,
               fa4e1et100Vlan3               Integer32,
               fa4e1et100Vlan4               Integer32,
               fa4e1et100Vlan5               Integer32,
               fa4e1et100Vlan6               Integer32,
               fa4e1et100Vlan7               Integer32,
               fa4e1et100Vlan8               Integer32,
               fa4e1et100Vlan9               Integer32,
               fa4e1et100Vlan10              Integer32,
               fa4e1et100Vlan11              Integer32,
               fa4e1et100Vlan12              Integer32,
               fa4e1et100Vlan13              Integer32,
               fa4e1et100Vlan14              Integer32,
               fa4e1et100Vlan15              Integer32           
           }
           
    	   fa4e1et100VlanChassisIndex    OBJECT-TYPE
        	   SYNTAX  Integer32 (0..9)
        	   MAX-ACCESS  read-only
               STATUS  current
               DESCRIPTION
                "A unique value for each card.
                It starts from 0 to 9 contiguously."
               ::= { fa4e1et100VlanEntry 1 }            
               
           fa4e1et100VlanSlotIndex	 OBJECT-TYPE
           	   SYNTAX  Integer32 (1..20)
               MAX-ACCESS  read-only
               STATUS  current
               DESCRIPTION
                "A unique value for each card.
                It starts from 1 to 20 contiguously."
               ::= { fa4e1et100VlanEntry 2 }
               
           fa4e1et100VlanSideIndex   OBJECT-TYPE
               SYNTAX  INTEGER {
                local(1),
                remoteA(2),
                remoteB(3),
                remoteC(4),
                remoteD(5)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "A unique value for each card. It is the card location:
                1:Local area
                2:Remote A or Remote area
                3:Remote B area
                4:Remote C area
                5:Remote D area"
            ::= { fa4e1et100VlanEntry 3 }
            
           fa4e1et100VlanEntryIndex   OBJECT-TYPE
               SYNTAX  INTEGER {
                vlan0(0),
                vlan1(1),
                vlan2(2),
                vlan3(3),
                vlan4(4),
                vlan5(5),
                vlan6(6),
                vlan7(7),
                vlan8(8),
                vlan9(9),
                vlan10(10),
                vlan11(11),
                vlan12(12),
                vlan13(13),
                vlan14(14),
                vlan15(15)
               }
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
                "Vlan entry select index.
                 It start from 0 to 15."
               ::= { fa4e1et100VlanEntry 4 }
               
           fa4e1et100VlanTag   OBJECT-TYPE
               SYNTAX  INTEGER {
                   untouch(1),
                   addTag(2),
                   removeTag(3)
               } 
               MAX-ACCESS  read-write
               STATUS  current
               DESCRIPTION
               "Vlan tag.
                1:Untouch.
                2:Add tag.
                3:Remove tag."
               ::= { fa4e1et100VlanEntry 5 }
		
           fa4e1et100Vlan0   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 0 ID.
                It start from 0 to 4094."
               ::={ fa4e1et100VlanEntry 6 }
               
           fa4e1et100Vlan1   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 1 ID.
                It start from 0 to 4094."
               ::={ fa4e1et100VlanEntry 7 }
           
           fa4e1et100Vlan2   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 2 ID.
                It start from 0 to 4094."
               ::={ fa4e1et100VlanEntry 8 }
               
           fa4e1et100Vlan3   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 3 ID.
                It start from 0 to 4094."
               ::={ fa4e1et100VlanEntry 9 }    
               
           fa4e1et100Vlan4   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 4 ID.
                It start from 0 to 4094."
               ::={ fa4e1et100VlanEntry 10 }
               
           fa4e1et100Vlan5   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 5 ID.
                It start from 0 to 4094."
               ::={ fa4e1et100VlanEntry 11 }     
            
           fa4e1et100Vlan6   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 6 ID.
                It start from 0 to 4094."
               ::={ fa4e1et100VlanEntry 12 }
               
           fa4e1et100Vlan7   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 7 ID.
                It start from 0 to 4094."
               ::={ fa4e1et100VlanEntry 13 }
               
           fa4e1et100Vlan8   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 8 ID.
                It start from 0 to 4094."
               ::={ fa4e1et100VlanEntry 14 }           
           
           fa4e1et100Vlan9   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 9 ID.
                It start from 0 to 4094."
               ::={ fa4e1et100VlanEntry 15 }
               
           fa4e1et100Vlan10   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 10 ID.
                It start from 0 to 4094."
               ::={ fa4e1et100VlanEntry 16 }
               
           fa4e1et100Vlan11   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 11 ID.
                It start from 0 to 4094."
               ::={ fa4e1et100VlanEntry 17 }
               
           fa4e1et100Vlan12   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 12 ID.
                It start from 0 to 4094."
               ::={ fa4e1et100VlanEntry 18 }
               
           fa4e1et100Vlan13   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 13 ID.
                It start from 0 to 4094."
               ::={ fa4e1et100VlanEntry 19 }
               
           fa4e1et100Vlan14   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 14 ID.
                It start from 0 to 4094."
               ::={ fa4e1et100VlanEntry 20 }
               
           fa4e1et100Vlan15   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 15 ID.
                It start from 0 to 4094."
               ::={ fa4e1et100VlanEntry 21 }
			

 

-- 5E1/ET100

fa5e1et100Project OBJECT IDENTIFIER ::= { faGswSnmp 6400 } 

fa5e1et100Cards  OBJECT IDENTIFIER ::= { fa5e1et100Project 1 }

    fa5e1et100Table  OBJECT-TYPE
        SYNTAX  SEQUENCE OF Fa5e1et100Entry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "A list of 5E1-ET100(T/S) series card entries."
		::= { fa5e1et100Cards 1 }

	fa5e1et100Entry  OBJECT-TYPE
		SYNTAX  Fa5e1et100Entry
		MAX-ACCESS  not-accessible
		STATUS  current
		DESCRIPTION
			"An entry containing management information applicable
			to a particular 5E1-ET100(T/S) series card."
		INDEX  { fa5e1et100ChassisIndex, fa5e1et100SlotIndex, fa5e1et100SideIndex }
		::= { fa5e1et100Table 1 }
		
	fa5e1et100VlanTable  OBJECT-TYPE
        SYNTAX  SEQUENCE OF Fa5e1et100VlanEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "A list of 5E1-ET100(T/S) series vlan trunking."
		::= { fa5e1et100Cards 2 }		
	
	fa5e1et100VlanEntry  OBJECT-TYPE
		SYNTAX  Fa5e1et100VlanEntry
		MAX-ACCESS  not-accessible
		STATUS  current
		DESCRIPTION
			"An entry containing vlan trunking applicable
			to a particular 5E1-ET100(T/S) series card."
		INDEX  { fa5e1et100VlanChassisIndex, fa5e1et100VlanSlotIndex, fa5e1et100VlanSideIndex }
		::= { fa5e1et100VlanTable 1 }

	Fa5e1et100Entry ::=
		SEQUENCE {
            fa5e1et100ChassisIndex      Integer32,
            fa5e1et100SlotIndex         Integer32,
            fa5e1et100SideIndex         INTEGER,
            fa5e1et100CardHWVer         DisplayString,
            fa5e1et100CardFWVer         DisplayString,
            fa5e1et100CardCPLDVer       DisplayString,
            fa5e1et100CardFPGAVer       DisplayString,

            fa5e1et100Model             INTEGER,
            fa5e1et100SystemStatus      INTEGER,
            fa5e1et100DeviceActive	    INTEGER,
--            fa5e1et100DeviceReset       INTEGER,
            fa5e1et100SetToDefault      INTEGER,

            fa5e1et100E1Ch1Singal       INTEGER,
            fa5e1et100E1Ch2Singal       INTEGER,
            fa5e1et100E1Ch3Singal       INTEGER,
            fa5e1et100E1Ch4Singal       INTEGER,
            fa5e1et100E1Ch5Singal       INTEGER,

            fa5e1et100E1Ch1Sync         INTEGER,
            fa5e1et100E1Ch2Sync         INTEGER,
            fa5e1et100E1Ch3Sync         INTEGER,
            fa5e1et100E1Ch4Sync         INTEGER,
            fa5e1et100E1Ch5Sync         INTEGER,

            fa5e1et100E1Ch1RecvAIS      INTEGER,
            fa5e1et100E1Ch2RecvAIS      INTEGER,
            fa5e1et100E1Ch3RecvAIS      INTEGER,
            fa5e1et100E1Ch4RecvAIS      INTEGER,
            fa5e1et100E1Ch5RecvAIS      INTEGER,

            fa5e1et100E1Ch1ConnType     INTEGER,
            fa5e1et100E1Ch2ConnType     INTEGER,
            fa5e1et100E1Ch3ConnType     INTEGER,
            fa5e1et100E1Ch4ConnType     INTEGER,
            fa5e1et100E1Ch5ConnType     INTEGER,

            fa5e1et100E1Ch1RAI          INTEGER,
            fa5e1et100E1Ch2RAI          INTEGER,
            fa5e1et100E1Ch3RAI          INTEGER,
            fa5e1et100E1Ch4RAI          INTEGER,
            fa5e1et100E1Ch5RAI          INTEGER,

            fa5e1et100E1Ch1LOMF         INTEGER,
            fa5e1et100E1Ch2LOMF         INTEGER,
            fa5e1et100E1Ch3LOMF         INTEGER,
            fa5e1et100E1Ch4LOMF         INTEGER,
            fa5e1et100E1Ch5LOMF         INTEGER,

            fa5e1et100E1Ch1Active       INTEGER,
            fa5e1et100E1Ch2Active       INTEGER,
            fa5e1et100E1Ch3Active       INTEGER,
            fa5e1et100E1Ch4Active       INTEGER,
            fa5e1et100E1Ch5Active       INTEGER,

            fa5e1et100E1Ch1LoopBack     INTEGER,
            fa5e1et100E1Ch2LoopBack     INTEGER,
            fa5e1et100E1Ch3LoopBack     INTEGER,
            fa5e1et100E1Ch4LoopBack     INTEGER,
            fa5e1et100E1Ch5LoopBack     INTEGER,

            fa5e1et100FxLink            INTEGER,
            fa5e1et100FxLaser           INTEGER,
            fa5e1et100FxActive          INTEGER,
            fa5e1et100FxLaserOutput     INTEGER,
            fa5e1et100FxOpMode          INTEGER,

            fa5e1et100UtpLink           INTEGER,
            fa5e1et100UtpStatus         INTEGER,
            fa5e1et100UtpFlowCtrlSts    INTEGER,
            fa5e1et100UtpMode           INTEGER,
            fa5e1et100UtpFlowCtrl       INTEGER,

            fa5e1et100SpeedLimit        Integer32,
            fa5e1et100VlanAware         INTEGER,
            fa5e1et100VlanID            Integer32,

            fa5e1et100RemoteDevice      INTEGER,
            fa5e1et100RemotePower       INTEGER,

            fa5e1et100TimingSource      INTEGER,
            fa5e1et100FCSofGFP          INTEGER,
            fa5e1et100AutoChAdjust      INTEGER,
            fa5e1et100PayloadScramble   INTEGER,
            fa5e1et100Failover          INTEGER,

            fa5e1et100LOM               INTEGER,
            fa5e1et100SQM               INTEGER,
            fa5e1et100CRC               INTEGER,
            fa5e1et100LOA               INTEGER,
            fa5e1et100LFD               INTEGER,
            fa5e1et100DDTO              INTEGER,

            fa5e1et100VcatMember1       INTEGER,
            fa5e1et100VcatMember2       INTEGER,
            fa5e1et100VcatMember3       INTEGER,
            fa5e1et100VcatMember4       INTEGER,
            fa5e1et100VcatMember5       INTEGER,

            fa5e1et100SnmpChannel1      INTEGER,
            fa5e1et100SnmpChannel2      INTEGER,
            fa5e1et100SnmpChannel3      INTEGER,
            fa5e1et100SnmpChannel4      INTEGER,
          --  fa5e1et100SnmpChannel5      INTEGER,

            fa5e1et100ErrSec            Counter32,
            fa5e1et100ErrFreeSec        Counter32,
            fa5e1et100ServErrSec        Counter32,
            fa5e1et100BertFunction      INTEGER,
            fa5e1et100ClrBertData       INTEGER,
            fa5e1et100BertE1Channel     INTEGER,

            fa5e1et100RmonFunction      INTEGER,
            fa5e1et100RmonTx            DisplayString,
            fa5e1et100RmonRx            DisplayString,
            fa5e1et100ClrRmonTx         INTEGER,
            fa5e1et100ClrRmonRx         INTEGER,

            fa5e1et100Sfp               INTEGER,
            fa5e1et100SfpVendor         DisplayString,
            fa5e1et100SfpPartNo         DisplayString,
            fa5e1et100SfpFiberType      INTEGER,
            fa5e1et100SfpTxWaveLen      DisplayString,
            fa5e1et100SfpRxWaveLen      DisplayString,
            fa5e1et100SfpLinkLen        DisplayString,
            fa5e1et100SfpModelID        DisplayString,
            fa5e1et100SfpVersion        DisplayString,
            fa5e1et100SfpModelType      DisplayString,

            fa5e1et100DDInformation     INTEGER,
            fa5e1et100DDTxPower         DisplayString,
            fa5e1et100DDRxPower         DisplayString,
            fa5e1et100DDRxSens          DisplayString,
            fa5e1et100DDTemp            DisplayString,
            fa5e1et100DDBias            DisplayString,
            fa5e1et100DDVoltage         DisplayString,

            fa5e1et100ChannelDefect      INTEGER,
            fa5e1et100LoopDetection      INTEGER,
            
            fa5e1et100LoopCh1      INTEGER,
            fa5e1et100LoopCh2      INTEGER,
            fa5e1et100LoopCh3      INTEGER,
            fa5e1et100LoopCh4      INTEGER,
            fa5e1et100LoopCh5      INTEGER,
            
            fa5e1et100DefectCh1      INTEGER,
            fa5e1et100DefectCh2      INTEGER,
            fa5e1et100DefectCh3      INTEGER,
            fa5e1et100DefectCh4      INTEGER,
            fa5e1et100DefectCh5      INTEGER,
            
            fa5e1et100FxSignal       INTEGER,
            fa5e1et100VlanMode		 INTEGER                         
    }

        fa5e1et100ChassisIndex OBJECT-TYPE
            SYNTAX  Integer32 (0..9)
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "A unique value for each card.
                It starts from 0 to 9 contiguously."
            ::= { fa5e1et100Entry 1 }

        fa5e1et100SlotIndex OBJECT-TYPE
            SYNTAX  Integer32 (1..20)
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "A unique value for each card.
                It starts from 1 to 20 contiguously."
            ::= { fa5e1et100Entry 2 }

        fa5e1et100SideIndex OBJECT-TYPE
            SYNTAX  INTEGER {
                local(1),
                remoteA(2),
                remoteB(3),
                remoteC(4),
                remoteD(5)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "A unique value for each card. It is the card location:
                1:Local area
                2:Remote A or Remote area
                3:Remote B area
                4:Remote C area
                5:Remote D area"
            ::= { fa5e1et100Entry 3 }

        fa5e1et100CardHWVer OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card hardware version x.xxx"
            ::= { fa5e1et100Entry 4 }

        fa5e1et100CardFWVer OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card firmware version x.xxx"
            ::= { fa5e1et100Entry 5 }

        fa5e1et100CardCPLDVer OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card CPLD version x.xxx"
            ::= { fa5e1et100Entry 6 }

        fa5e1et100CardFPGAVer OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card FPGA version x.xxx"
            ::= { fa5e1et100Entry 7 }

        fa5e1et100Model  OBJECT-TYPE
            SYNTAX  INTEGER {
                fa5E1Et100T(6400),
                fa5E1Et100S(6500)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "Card Type:
                6400:5E1-ET100T
                6500:5E1-ET100S"
            ::= { fa5e1et100Entry 8 }

        fa5e1et100SystemStatus  OBJECT-TYPE
            SYNTAX  INTEGER {
                normal(1),
                alarm(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card system status:
                1:Normal
                2:Alarm"
	        ::= { fa5e1et100Entry 9 }

        fa5e1et100DeviceActive  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card active:
                1:Disable 
                2:Enable"
            ::= { fa5e1et100Entry 10 }

--        fa5e1et100DeviceReset  OBJECT-TYPE
--            SYNTAX  INTEGER {
--                off(1),
--                trigger(2)
--            }
--            MAX-ACCESS  read-write
--            STATUS  current
--            DESCRIPTION
--                "5E1-ET100(T/S) Series card device reset:
--                1:Off
--                2:Trigger"
--            ::= { fa5e1et100Entry 11 }

        fa5e1et100SetToDefault  OBJECT-TYPE
            SYNTAX  INTEGER {
                off(1),
                act(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card port set to default:
                1:Off
                2:Trigger"
            ::= { fa5e1et100Entry 12 }

        fa5e1et100E1Ch1Singal  OBJECT-TYPE
            SYNTAX  INTEGER {
                singalLoss(1),
                normal(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 1 signal status:
                1:Singal Loss
                2:Normal"
            ::= { fa5e1et100Entry 13 }

        fa5e1et100E1Ch2Singal  OBJECT-TYPE
            SYNTAX  INTEGER {
                singalLoss(1),
                normal(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 2 signal status:
                1:Singal Loss
                2:Normal"
            ::= { fa5e1et100Entry 14 }

        fa5e1et100E1Ch3Singal  OBJECT-TYPE
            SYNTAX  INTEGER {
                singalLoss(1),
                normal(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 3 signal status:
                1:Singal Loss
                2:Normal"
            ::= { fa5e1et100Entry 15 }

        fa5e1et100E1Ch4Singal  OBJECT-TYPE
            SYNTAX  INTEGER {
                singalLoss(1),
                normal(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 4 signal status:
                1:Singal Loss
                2:Normal"
            ::= { fa5e1et100Entry 16 }

        fa5e1et100E1Ch5Singal  OBJECT-TYPE
            SYNTAX  INTEGER {
                singalLoss(1),
                normal(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 5 signal status:
                1:Singal Loss
                2:Normal"
            ::= { fa5e1et100Entry 17 }

        fa5e1et100E1Ch1Sync  OBJECT-TYPE
            SYNTAX  INTEGER {
                syncLoss(1),
                sync(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 1 sync status:
                1:Sync Loss
                2:Sync"
            ::= { fa5e1et100Entry 18 }

        fa5e1et100E1Ch2Sync  OBJECT-TYPE
            SYNTAX  INTEGER {
                syncLoss(1),
                sync(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 2 sync status:
                1:Sync Loss
                2:Sync"
            ::= { fa5e1et100Entry 19 }

        fa5e1et100E1Ch3Sync  OBJECT-TYPE
            SYNTAX  INTEGER {
                syncLoss(1),
                sync(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 3 sync status:
                1:Sync Loss
                2:Sync"
            ::= { fa5e1et100Entry 20 }

        fa5e1et100E1Ch4Sync  OBJECT-TYPE
            SYNTAX  INTEGER {
                syncLoss(1),
                sync(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 4 sync status:
                1:Sync Loss
                2:Sync"
            ::= { fa5e1et100Entry 21 }

        fa5e1et100E1Ch5Sync  OBJECT-TYPE
            SYNTAX  INTEGER {
                syncLoss(1),
                sync(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 5 sync status:
                1:Sync Loss
                2:Sync"
            ::= { fa5e1et100Entry 22 }

        fa5e1et100E1Ch1RecvAIS  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 1 receive AIS status:
                1:No
                2:Yes"
            ::= { fa5e1et100Entry 23 }

        fa5e1et100E1Ch2RecvAIS  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 2 receive AIS status:
                1:No
                2:Yes"
            ::= { fa5e1et100Entry 24 }

        fa5e1et100E1Ch3RecvAIS  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 3 receive AIS status:
                1:No
                2:Yes"
            ::= { fa5e1et100Entry 25 }

        fa5e1et100E1Ch4RecvAIS  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 4 receive AIS status:
                1:No
                2:Yes"
            ::= { fa5e1et100Entry 26 }

        fa5e1et100E1Ch5RecvAIS  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 5 receive AIS status:
                1:No
                2:Yes"
            ::= { fa5e1et100Entry 27 }

        fa5e1et100E1Ch1ConnType  OBJECT-TYPE
            SYNTAX  INTEGER {
                rj48c(1),
                bnc(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 1 connector type:
                1:RJ-48C
                2:BNC"
            ::= { fa5e1et100Entry 28 }

        fa5e1et100E1Ch2ConnType  OBJECT-TYPE
            SYNTAX  INTEGER {
                rj48c(1),
                bnc(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 2 connector type:
                1:RJ-48C
                2:BNC"
            ::= { fa5e1et100Entry 29 }

        fa5e1et100E1Ch3ConnType  OBJECT-TYPE
            SYNTAX  INTEGER {
                rj48c(1),
                bnc(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 3 connector type:
                1:RJ-48C
                2:BNC"
            ::= { fa5e1et100Entry 30 }

        fa5e1et100E1Ch4ConnType  OBJECT-TYPE
            SYNTAX  INTEGER {
                rj48c(1),
                bnc(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 4 connector type:
                1:RJ-48C
                2:BNC"
            ::= { fa5e1et100Entry 31 }

        fa5e1et100E1Ch5ConnType  OBJECT-TYPE
            SYNTAX  INTEGER {
                rj48c(1),
                bnc(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 5 connector type:
                1:RJ-48C
                2:BNC"
            ::= { fa5e1et100Entry 32 }

        fa5e1et100E1Ch1RAI  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 1 RAI status:
                1:No
                2:Yes"
            ::= { fa5e1et100Entry 33 }

        fa5e1et100E1Ch2RAI  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 2 RAI status:
                1:No
                2:Yes"
            ::= { fa5e1et100Entry 34 }

        fa5e1et100E1Ch3RAI  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 3 RAI status:
                1:No
                2:Yes"
            ::= { fa5e1et100Entry 35 }

        fa5e1et100E1Ch4RAI  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 4 RAI status:
                1:No
                2:Yes"
            ::= { fa5e1et100Entry 36 }

        fa5e1et100E1Ch5RAI  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 5 RAI status:
                1:No
                2:Yes"
            ::= { fa5e1et100Entry 37 }

        fa5e1et100E1Ch1LOMF  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 1 LOMF status:
                1:No
                2:Yes"
            ::= { fa5e1et100Entry 38 }

        fa5e1et100E1Ch2LOMF  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 2 LOMF status:
                1:No
                2:Yes"
            ::= { fa5e1et100Entry 39 }

        fa5e1et100E1Ch3LOMF  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 3 LOMF status:
                1:No
                2:Yes"
            ::= { fa5e1et100Entry 40 }

        fa5e1et100E1Ch4LOMF  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 4 LOMF status:
                1:No
                2:Yes"
            ::= { fa5e1et100Entry 41 }

        fa5e1et100E1Ch5LOMF  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 5 LOMF status:
                1:No
                2:Yes"
            ::= { fa5e1et100Entry 42 }

        fa5e1et100E1Ch1Active  OBJECT-TYPE
            SYNTAX  INTEGER {
                inactive(1),
                active(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 1 active status:
                1:Inactive
                2:Active"
            ::= { fa5e1et100Entry 43 }

        fa5e1et100E1Ch2Active  OBJECT-TYPE
            SYNTAX  INTEGER {
                inactive(1),
                active(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 2 active status:
                1:Inactive
                2:Active"
            ::= { fa5e1et100Entry 44 }

        fa5e1et100E1Ch3Active  OBJECT-TYPE
            SYNTAX  INTEGER {
                inactive(1),
                active(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 3 active status:
                1:Inactive
                2:Active"
            ::= { fa5e1et100Entry 45 }

        fa5e1et100E1Ch4Active  OBJECT-TYPE
            SYNTAX  INTEGER {
                inactive(1),
                active(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 4 active status:
                1:Inactive
                2:Active"
            ::= { fa5e1et100Entry 46 }

        fa5e1et100E1Ch5Active  OBJECT-TYPE
            SYNTAX  INTEGER {
                inactive(1),
                active(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 5 active status:
                1:Inactive
                2:Active"
            ::= { fa5e1et100Entry 47 }

        fa5e1et100E1Ch1LoopBack  OBJECT-TYPE
            SYNTAX  INTEGER {
                off(1),
                rlb(3)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card port E1 channel 1 loop back:
                1:Off
                3:RLB (Max used 4 channels)"
            ::= { fa5e1et100Entry 48 }

        fa5e1et100E1Ch2LoopBack  OBJECT-TYPE
            SYNTAX  INTEGER {
                off(1),
                rlb(3)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card port E1 channel 2 loop back:
                1:Off
                3:RLB (Max used 4 channels)"
            ::= { fa5e1et100Entry 49 }

        fa5e1et100E1Ch3LoopBack  OBJECT-TYPE
            SYNTAX  INTEGER {
                off(1),
                rlb(3)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card port E1 channel 3 loop back:
                1:Off
                3:RLB (Max used 4 channels)"
            ::= { fa5e1et100Entry 50 }

        fa5e1et100E1Ch4LoopBack  OBJECT-TYPE
            SYNTAX  INTEGER {
                off(1),
                rlb(3)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card port E1 channel 4 loop back:
                1:Off
                3:RLB (Max used 4 channels)"
            ::= { fa5e1et100Entry 51 }

        fa5e1et100E1Ch5LoopBack  OBJECT-TYPE
            SYNTAX  INTEGER {
                off(1),
                rlb(3)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card port E1 channel 5 loop back:
                1:Off
                3:RLB (Max used 4 channels)"
            ::= { fa5e1et100Entry 52 }

        fa5e1et100FxLink  OBJECT-TYPE
            SYNTAX  INTEGER {
                linkDown(1),
                linkUp(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100S Series card Fiber siganl detect status:
                1:Link down or Fiber unplugged
                2:Link up or Singal detected"
            ::= { fa5e1et100Entry 53 }

        fa5e1et100FxLaser  OBJECT-TYPE
            SYNTAX  INTEGER {
                normal(1),
                error(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100S Series card laser status:
                1:Normal
                2:Error"
            ::= { fa5e1et100Entry 54 }

        fa5e1et100FxActive  OBJECT-TYPE
            SYNTAX  INTEGER {
                inactive(1),
                active(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "5E1-ET100S Series card Fiber active:
                1:Inactive
                2:Active"
            ::= { fa5e1et100Entry 55 }

        fa5e1et100FxLaserOutput  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "5E1-ET100S Series card laser output:
                1:disable
                2:Enable"
            ::= { fa5e1et100Entry 56 }

        fa5e1et100FxOpMode  OBJECT-TYPE
            SYNTAX  INTEGER {
                switch(1),
                convert(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "5E1-ET100S Series card operation mode:
                1:Switch
                2:Convert"
            ::= { fa5e1et100Entry 57 }

        fa5e1et100UtpLink  OBJECT-TYPE
            SYNTAX  INTEGER {
                linkDown(1),
                linkUp(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100T Series card UTP link status:
                1:Link Down
                2:Link Up"
            ::= { fa5e1et100Entry 58 }

        fa5e1et100UtpStatus  OBJECT-TYPE
            SYNTAX  INTEGER {
                none(1),
                link10MbpsHDX(2),
                link10MbpsFDX(3),
                link100MbpsHDX(4),
                link100MbpsFDX(5)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100T Series card UTP link mode status:
                1:None, Maybe link down
                2:Link at 10Mbps, Half duplex
                3:Link at 10Mbps, Full duplex
                4:Link at 100Mbps, Half duplex
                5:Link at 100Mbps, Full duplex"
            ::= { fa5e1et100Entry 59 }

        fa5e1et100UtpFlowCtrlSts  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100T Series card UTP flow control status:
                1:Disable
                2:Enable"
            ::= { fa5e1et100Entry 60 }

        fa5e1et100UtpMode  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                autoNegotiation(2),
                force10MbpsHDX(3),
                force10MbpsFDX(4),
                force100MbpsHDX(5),
                force100MbpsFDX(6)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "5E1-ET100T) Series card UTP mode:
                1:Disable
                2:Enable and autoNegotiation
                3:Enable and force to 10Mbps, Half duplex
                4:Enable and force to 10Mbps, Full duplex
                5:Enable and force to 100Mbps, Half duplex
                6:Enable and force to 100Mbps, Full duplex"
            ::= { fa5e1et100Entry 61 }

        fa5e1et100UtpFlowCtrl  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "5E1-ET100T Series card UTP flow control:
                1:Disable
                2:Enable"
            ::= { fa5e1et100Entry 62 }

        fa5e1et100SpeedLimit  OBJECT-TYPE
            SYNTAX  Integer32 (0..3125)
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card speed limit:
                Limited = this value * 32Kbps,
                this value is restricted to 0 ~ 3125, 0 to disable"
            ::= { fa5e1et100Entry 63 }

        fa5e1et100VlanAware  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card 802.1q VLAN tag aware:
                1:Disable
                2:Enable"
            ::= { fa5e1et100Entry 64 }

        fa5e1et100VlanID  OBJECT-TYPE
            SYNTAX  Integer32 (1..4094)
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card VLAN ID:
                The ID is restricted to 1 ~ 4094"
            ::= { fa5e1et100Entry 65 }

        fa5e1et100RemoteDevice  OBJECT-TYPE
            SYNTAX  INTEGER {
                linkDown(1),
                linkUp(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "FRM220A-5E1 Series card remote device status:
                1:Link Down
                2:Link Up"
            ::= { fa5e1et100Entry 66 }

        fa5e1et100RemotePower  OBJECT-TYPE
            SYNTAX  INTEGER {
                normal(1),
                off(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card remote device power status:
                1:Normal
                2:Power off"
            ::= { fa5e1et100Entry 67 }

        fa5e1et100TimingSource  OBJECT-TYPE
            SYNTAX  INTEGER {
                recoveryFromE1Channel1(1),
                recoveryFromE1Channel2(2),
                recoveryFromE1Channel3(3),
                recoveryFromE1Channel4(4),
                recoveryFromE1Channel5(5),
                internalOscillator(6)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card clock:
                1:Recovery from E1 channel 1
                2:Recovery from E1 channel 2
                3:Recovery from E1 channel 3
                4:Recovery from E1 channel 4
                5:Recovery from E1 channel 5
                6:Internal oscillatro"
            ::= { fa5e1et100Entry 68 }

        fa5e1et100FCSofGFP  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card FCS of GFP:
                1:Disable
                2:Enable"
            ::= { fa5e1et100Entry 69 }

        fa5e1et100AutoChAdjust  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card auto channel Bdjust:
                1:Disable
                2:Enable"
            ::= { fa5e1et100Entry 70 }

        fa5e1et100PayloadScramble  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card payload scramble:
                1:Disable
                2:Enable"
            ::= { fa5e1et100Entry 71 }

      fa5e1et100Failover  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card failover:
                1:Disable
                2:Enable"
            ::= { fa5e1et100Entry 72 }

        fa5e1et100LOM  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card LOM status:
                1:No
                2:Yes"
            ::= { fa5e1et100Entry 73 }

        fa5e1et100SQM  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card SQM status:
                1:No
                2:Yes"
            ::= { fa5e1et100Entry 74 }

        fa5e1et100CRC  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card CRC status:
                1:No
                2:Yes"
            ::= { fa5e1et100Entry 75 }

        fa5e1et100LOA  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card LOA status:
                1:No
                2:Yes"
            ::= { fa5e1et100Entry 76 }

        fa5e1et100LFD  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card LFD status:
                1:No
                2:Yes"
            ::= { fa5e1et100Entry 77 }

        fa5e1et100DDTO  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card DDTO status:
                1:No
                2:Yes"
            ::= { fa5e1et100Entry 78 }

        fa5e1et100VcatMember1  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card VACT member 1:
                1:Disable
                2:Enable"
            ::= { fa5e1et100Entry 79 }

        fa5e1et100VcatMember2  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card VACT member 2:
                1:Disable
                2:Enable"
            ::= { fa5e1et100Entry 80 }

        fa5e1et100VcatMember3  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card VACT member 3:
                1:Disable
                2:Enable"
            ::= { fa5e1et100Entry 81 }

        fa5e1et100VcatMember4  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card VACT member 4:
                1:Disable
                2:Enable"
            ::= { fa5e1et100Entry 82 }

        fa5e1et100VcatMember5  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card VACT member 5:
                1:Disable
                2:Enable"
            ::= { fa5e1et100Entry 83 }

        fa5e1et100SnmpChannel1  OBJECT-TYPE
            SYNTAX  INTEGER {
                noUse(1),
                use(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card SNMP channel 1:
                1:No use
                2:Use"
            ::= { fa5e1et100Entry 84 }

        fa5e1et100SnmpChannel2  OBJECT-TYPE
            SYNTAX  INTEGER {
                noUse(1),
                use(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card SNMP channel 2:
                1:No use
                2:Use"
            ::= { fa5e1et100Entry 85 }

        fa5e1et100SnmpChannel3  OBJECT-TYPE
            SYNTAX  INTEGER {
                noUse(1),
                use(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card SNMP channel 3:
                1:No use
                2:Use"
            ::= { fa5e1et100Entry 86 }

        fa5e1et100SnmpChannel4  OBJECT-TYPE
            SYNTAX  INTEGER {
                noUse(1),
                use(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card SNMP channel 4:
                1:No use
                2:Use"
            ::= { fa5e1et100Entry 87 }

    --    fa5e1et100SnmpChannel5  OBJECT-TYPE
     --       SYNTAX  INTEGER {
     --           noUse(1),
     --           use(2)
    --        }
     --       MAX-ACCESS  read-write
     --       STATUS  current
     --       DESCRIPTION
     --           "5E1-ET100(T/S) Series card SNMP channel 5:
     --           1:No use
     --           2:Use"
      --      ::= { fa5e1et100Entry 88 }

        fa5e1et100ErrSec  OBJECT-TYPE
            SYNTAX  Counter32
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card, errored seconds of BERT result."
            ::= { fa5e1et100Entry 89 }

        fa5e1et100ErrFreeSec  OBJECT-TYPE
            SYNTAX  Counter32
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card, errored free seconds of BERT result."
            ::= { fa5e1et100Entry 90 }

        fa5e1et100ServErrSec  OBJECT-TYPE
            SYNTAX  Counter32
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card, severely errored seconds of BERT result."
            ::= { fa5e1et100Entry 91 }

        fa5e1et100BertFunction  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card bert function:
                1:Disable
                2:Enable"
            ::= { fa5e1et100Entry 92 }

        fa5e1et100ClrBertData  OBJECT-TYPE
            SYNTAX  INTEGER {
                normal(1),
                clear(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card bert data clear:
                1:Normal
                2:Clear"
            ::= { fa5e1et100Entry 93 }

        fa5e1et100BertE1Channel  OBJECT-TYPE
            SYNTAX  INTEGER {
                e1Channel1(1),
                e1Channel2(2),
                e1Channel3(3),
                e1Channel4(4),
                e1Channel5(5)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card bert E1 channel number:
                1:E1 channel 1
                2:E1 channel 2
                3:E1 channel 3
                4:E1 channel 4
                5:E1 channel 5"
            ::= { fa5e1et100Entry 94 }

        fa5e1et100RmonFunction  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series RMON function :
                1:Disable
                2:Enable"
            ::= { fa5e1et100Entry 95 }

        fa5e1et100RmonTx  OBJECT-TYPE
        SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card RMON Tx counter."
            ::= { fa5e1et100Entry 96 }

        fa5e1et100RmonRx  OBJECT-TYPE
        SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card RMON Rx counter."
            ::= { fa5e1et100Entry 97 }

        fa5e1et100ClrRmonTx  OBJECT-TYPE
            SYNTAX  INTEGER {
                normal(1),
                clear(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card clear RMON Tx counter:
                1:Normal
                1:Clear"
            ::= { fa5e1et100Entry 98 }

        fa5e1et100ClrRmonRx  OBJECT-TYPE
            SYNTAX  INTEGER {
                normal(1),
                clear(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card clear RMON Rx counter:
                1:Normal
                1:Clear"
            ::= { fa5e1et100Entry 99 }

        fa5e1et100Sfp  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card, SFP existed:
                1:No
                2:Yes"
            ::= { fa5e1et100Entry 100 }

        fa5e1et100SfpVendor  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card, Vendor name of SFP."
            ::= { fa5e1et100Entry 101 }

        fa5e1et100SfpPartNo  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card, Vendor part number of SFP."
            ::= { fa5e1et100Entry 102}

        fa5e1et100SfpFiberType  OBJECT-TYPE
            SYNTAX  INTEGER{
                unknow(1),
                single(2),
                multi(3)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card, Fiber Type of SFP."
            ::= { fa5e1et100Entry 103 }

        fa5e1et100SfpTxWaveLen  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card, Tx Wave length of SFP."
            ::= { fa5e1et100Entry 104 }

        fa5e1et100SfpRxWaveLen  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card, Rx Wave length of SFP."
            ::= { fa5e1et100Entry 105 }

        fa5e1et100SfpLinkLen  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card, Link length of SFP."
            ::= { fa5e1et100Entry 106 }

        fa5e1et100SfpModelID  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card, model ID of SFP."
            ::= { fa5e1et100Entry 107}

        fa5e1et100SfpVersion  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card, the version of SFP."
            ::= { fa5e1et100Entry 108}

        fa5e1et100SfpModelType  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card, model type of SFP."
            ::= { fa5e1et100Entry 109}

        fa5e1et100DDInformation  OBJECT-TYPE
            SYNTAX  INTEGER{
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card, D/D information of SFP Supported:
                1:No,
                2:Yes"
            ::= { fa5e1et100Entry 110 }

        fa5e1et100DDTxPower  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card, Tx power of D/D information."
            ::= { fa5e1et100Entry 111 }

        fa5e1et100DDRxPower  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card, Rx power of D/D information."
            ::= { fa5e1et100Entry 112 }

        fa5e1et100DDRxSens  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card, Sensitivity of D/D information."
            ::= { fa5e1et100Entry 113 }

        fa5e1et100DDTemp  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card, Temperature of D/D information in degree C."
            ::= { fa5e1et100Entry 114 }

        fa5e1et100DDBias  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card, BIAS of D/D information."
            ::= { fa5e1et100Entry 115 }

        fa5e1et100DDVoltage  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card, Voltage of D/D information."
            ::= { fa5e1et100Entry 116}
 
 
        fa5e1et100ChannelDefect  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                set-1E-4(4),
                set-1E-6(6)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card Channel Defect:
                1:Disable
                4:1E-4
                6:1E-6"
            ::= { fa5e1et100Entry 117 } 
 
        fa5e1et100LoopDetection  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card Loop Detection:
                1:Disable
                2:Enable
                "
            ::= { fa5e1et100Entry 118 }             
            
        fa5e1et100LoopCh1  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 1 Loop Check State:
                1:No
                2:Yes"
            ::= { fa5e1et100Entry 119 }            

        fa5e1et100LoopCh2  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 2 Loop Check State:
                1:No
                2:Yes"
            ::= { fa5e1et100Entry 120 } 
            
        fa5e1et100LoopCh3  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 3 Loop Check State:
                1:No
                2:Yes"
            ::= { fa5e1et100Entry 121 } 
            
        fa5e1et100LoopCh4  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 4 Loop Check State:
                1:No
                2:Yes"
            ::= { fa5e1et100Entry 122 } 
            
        fa5e1et100LoopCh5  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 5 Loop Check State:
                1:No
                2:Yes"
            ::= { fa5e1et100Entry 123 } 
            
        fa5e1et100DefectCh1  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 1 Defect Status:
                1:No
                2:Yes"
            ::= { fa5e1et100Entry 124 }            

        fa5e1et100DefectCh2  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 2 Defect Status:
                1:No
                2:Yes"
            ::= { fa5e1et100Entry 125 }    
            
        fa5e1et100DefectCh3  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 3 Defect Status:
                1:No
                2:Yes"
            ::= { fa5e1et100Entry 126 }    
            
        fa5e1et100DefectCh4  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 4 Defect Status:
                1:No
                2:Yes"
            ::= { fa5e1et100Entry 127 }    
            
        fa5e1et100DefectCh5  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card E1 channel 5 Defect Status:
                1:No
                2:Yes"
            ::= { fa5e1et100Entry 128 } 

         fa5e1et100FxSignal  OBJECT-TYPE
            SYNTAX  INTEGER {
                unplugged(1),
                detected(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "5E1-ET100(T/S) Series card Fiber signal detect(SD):
                1:Fiber unplugged
                2:Signal detected"
            ::= { fa5e1et100Entry 129 }
            
        fa5e1et100VlanMode	 OBJECT-TYPE
			SYNTAX  INTEGER {
                mode2(1),
                mode1(2)
            }
            MAX-ACCESS  read-write
            STATUS	current
            DESCRIPTION
            	"5E1-ET100(T/S) Series card Vlan Mode Setting:
            	1:Vlan Mode 2
            	2:Vlan Mode 1"
            ::= { fa5e1et100Entry 130}
            
            
		Fa5e1et100VlanEntry ::=
           SEQUENCE {
               fa5e1et100VlanChassisIndex	 Integer32,
               fa5e1et100VlanSlotIndex		 Integer32,
               fa5e1et100VlanSideIndex       INTEGER,
               
               fa5e1et100VlanEntryIndex	     INTEGER,
               fa5e1et100VlanTag             INTEGER,
               
               fa5e1et100Vlan0				 Integer32,
               fa5e1et100Vlan1               Integer32,
               fa5e1et100Vlan2               Integer32,
               fa5e1et100Vlan3               Integer32,
               fa5e1et100Vlan4               Integer32,
               fa5e1et100Vlan5               Integer32,
               fa5e1et100Vlan6               Integer32,
               fa5e1et100Vlan7               Integer32,
               fa5e1et100Vlan8               Integer32,
               fa5e1et100Vlan9               Integer32,
               fa5e1et100Vlan10              Integer32,
               fa5e1et100Vlan11              Integer32,
               fa5e1et100Vlan12              Integer32,
               fa5e1et100Vlan13              Integer32,
               fa5e1et100Vlan14              Integer32,
               fa5e1et100Vlan15              Integer32           
           }
           
    	   fa5e1et100VlanChassisIndex    OBJECT-TYPE
        	   SYNTAX  Integer32 (0..9)
        	   MAX-ACCESS  read-only
               STATUS  current
               DESCRIPTION
                "A unique value for each card.
                It starts from 0 to 9 contiguously."
               ::= { fa5e1et100VlanEntry 1 }            
               
           fa5e1et100VlanSlotIndex	 OBJECT-TYPE
           	   SYNTAX  Integer32 (1..20)
               MAX-ACCESS  read-only
               STATUS  current
               DESCRIPTION
                "A unique value for each card.
                It starts from 1 to 20 contiguously."
               ::= { fa5e1et100VlanEntry 2 }
               
           fa5e1et100VlanSideIndex   OBJECT-TYPE
               SYNTAX  INTEGER {
                local(1),
                remoteA(2),
                remoteB(3),
                remoteC(4),
                remoteD(5)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "A unique value for each card. It is the card location:
                1:Local area
                2:Remote A or Remote area
                3:Remote B area
                4:Remote C area
                5:Remote D area"
            ::= { fa5e1et100VlanEntry 3 }
            
           fa5e1et100VlanEntryIndex   OBJECT-TYPE
               SYNTAX  INTEGER {
                vlan0(0),
                vlan1(1),
                vlan2(2),
                vlan3(3),
                vlan4(4),
                vlan5(5),
                vlan6(6),
                vlan7(7),
                vlan8(8),
                vlan9(9),
                vlan10(10),
                vlan11(11),
                vlan12(12),
                vlan13(13),
                vlan14(14),
                vlan15(15)
               }
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
                "Vlan entry select index.
                 It start from 0 to 15."
               ::= { fa5e1et100VlanEntry 4 }
               
           fa5e1et100VlanTag   OBJECT-TYPE
               SYNTAX  INTEGER {
                   untouch(1),
                   addTag(2),
                   removeTag(3)
               } 
               MAX-ACCESS  read-write
               STATUS  current
               DESCRIPTION
               "Vlan tag.
                1:Untouch.
                2:Add tag.
                3:Remove tag."
               ::= { fa5e1et100VlanEntry 5 }
		
           fa5e1et100Vlan0   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 0 ID.
                It start from 0 to 4094."
               ::={ fa5e1et100VlanEntry 6 }
               
           fa5e1et100Vlan1   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 1 ID.
                It start from 0 to 4094."
               ::={ fa5e1et100VlanEntry 7 }
           
           fa5e1et100Vlan2   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 2 ID.
                It start from 0 to 4094."
               ::={ fa5e1et100VlanEntry 8 }
               
           fa5e1et100Vlan3   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 3 ID.
                It start from 0 to 4094."
               ::={ fa5e1et100VlanEntry 9 }    
               
           fa5e1et100Vlan4   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 4 ID.
                It start from 0 to 4094."
               ::={ fa5e1et100VlanEntry 10 }
               
           fa5e1et100Vlan5   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 5 ID.
                It start from 0 to 4094."
               ::={ fa5e1et100VlanEntry 11 }     
            
           fa5e1et100Vlan6   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 6 ID.
                It start from 0 to 4094."
               ::={ fa5e1et100VlanEntry 12 }
               
           fa5e1et100Vlan7   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 7 ID.
                It start from 0 to 4094."
               ::={ fa5e1et100VlanEntry 13 }
               
           fa5e1et100Vlan8   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 8 ID.
                It start from 0 to 4094."
               ::={ fa5e1et100VlanEntry 14 }           
           
           fa5e1et100Vlan9   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 9 ID.
                It start from 0 to 4094."
               ::={ fa5e1et100VlanEntry 15 }
               
           fa5e1et100Vlan10   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 10 ID.
                It start from 0 to 4094."
               ::={ fa5e1et100VlanEntry 16 }
               
           fa5e1et100Vlan11   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 11 ID.
                It start from 0 to 4094."
               ::={ fa5e1et100VlanEntry 17 }
               
           fa5e1et100Vlan12   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 12 ID.
                It start from 0 to 4094."
               ::={ fa5e1et100VlanEntry 18 }
               
           fa5e1et100Vlan13   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 13 ID.
                It start from 0 to 4094."
               ::={ fa5e1et100VlanEntry 19 }
               
           fa5e1et100Vlan14   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 14 ID.
                It start from 0 to 4094."
               ::={ fa5e1et100VlanEntry 20 }
               
           fa5e1et100Vlan15   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 15 ID.
                It start from 0 to 4094."
               ::={ fa5e1et100VlanEntry 21 } 
-- 8E1/ET100

fa8e1et100Project OBJECT IDENTIFIER ::= { faGswSnmp 6600 } 

fa8e1et100Cards  OBJECT IDENTIFIER ::= { fa8e1et100Project 1 }

    fa8e1et100Table  OBJECT-TYPE
        SYNTAX  SEQUENCE OF Fa8e1et100Entry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "A list of 8E1-ET100(T/S) series card entries."
		::= { fa8e1et100Cards 1 }

	fa8e1et100Entry  OBJECT-TYPE
		SYNTAX  Fa8e1et100Entry
		MAX-ACCESS  not-accessible
		STATUS  current
		DESCRIPTION
			"An entry containing management information applicable
			to a particular 8E1-ET100(T/S) series card."
		INDEX  { fa8e1et100ChassisIndex, fa8e1et100SlotIndex, fa8e1et100SideIndex }
		::= { fa8e1et100Table 1 }
		
	fa8e1et100VlanTable  OBJECT-TYPE
        SYNTAX  SEQUENCE OF Fa8e1et100VlanEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "A list of 8E1-ET100(T/S) series vlan trunking."
		::= { fa8e1et100Cards 2 }		
	
	fa8e1et100VlanEntry  OBJECT-TYPE
		SYNTAX  Fa8e1et100VlanEntry
		MAX-ACCESS  not-accessible
		STATUS  current
		DESCRIPTION
			"An entry containing vlan trunking applicable
			to a particular 8E1-ET100(T/S) series card."
		INDEX  { fa8e1et100VlanChassisIndex, fa8e1et100VlanSlotIndex, fa8e1et100VlanSideIndex }
		::= { fa8e1et100VlanTable 1 }

	Fa8e1et100Entry ::=
		SEQUENCE {
            fa8e1et100ChassisIndex      Integer32,
            fa8e1et100SlotIndex         Integer32,
            fa8e1et100SideIndex         INTEGER,
            fa8e1et100CardHWVer         DisplayString,
            fa8e1et100CardFWVer         DisplayString,
            fa8e1et100CardCPLDVer       DisplayString,
            fa8e1et100CardFPGAVer       DisplayString,

            fa8e1et100Model             INTEGER,
            fa8e1et100SystemStatus      INTEGER,
            fa8e1et100DeviceActive	    INTEGER,
--            fa8e1et100DeviceReset       INTEGER,
            fa8e1et100SetToDefault      INTEGER,

            fa8e1et100E1Ch1Singal       INTEGER,
            fa8e1et100E1Ch2Singal       INTEGER,
            fa8e1et100E1Ch3Singal       INTEGER,
            fa8e1et100E1Ch4Singal       INTEGER,
            fa8e1et100E1Ch5Singal       INTEGER,
            fa8e1et100E1Ch6Singal       INTEGER,
            fa8e1et100E1Ch7Singal       INTEGER,
            fa8e1et100E1Ch8Singal       INTEGER,
            
            fa8e1et100E1Ch1Sync         INTEGER,
            fa8e1et100E1Ch2Sync         INTEGER,
            fa8e1et100E1Ch3Sync         INTEGER,
            fa8e1et100E1Ch4Sync         INTEGER,
            fa8e1et100E1Ch5Sync         INTEGER,
            fa8e1et100E1Ch6Sync         INTEGER,
            fa8e1et100E1Ch7Sync         INTEGER,
            fa8e1et100E1Ch8Sync         INTEGER,
            
            fa8e1et100E1Ch1RecvAIS      INTEGER,
            fa8e1et100E1Ch2RecvAIS      INTEGER,
            fa8e1et100E1Ch3RecvAIS      INTEGER,
            fa8e1et100E1Ch4RecvAIS      INTEGER,
            fa8e1et100E1Ch5RecvAIS      INTEGER,
            fa8e1et100E1Ch6RecvAIS      INTEGER,
            fa8e1et100E1Ch7RecvAIS      INTEGER,
            fa8e1et100E1Ch8RecvAIS      INTEGER,
            
            fa8e1et100E1Ch1ConnType     INTEGER,
            fa8e1et100E1Ch2ConnType     INTEGER,
            fa8e1et100E1Ch3ConnType     INTEGER,
            fa8e1et100E1Ch4ConnType     INTEGER,
            fa8e1et100E1Ch5ConnType     INTEGER,
            fa8e1et100E1Ch6ConnType     INTEGER,
            fa8e1et100E1Ch7ConnType     INTEGER,
            fa8e1et100E1Ch8ConnType     INTEGER,

            fa8e1et100E1Ch1RAI          INTEGER,
            fa8e1et100E1Ch2RAI          INTEGER,
            fa8e1et100E1Ch3RAI          INTEGER,
            fa8e1et100E1Ch4RAI          INTEGER,
            fa8e1et100E1Ch5RAI          INTEGER,
            fa8e1et100E1Ch6RAI          INTEGER,
            fa8e1et100E1Ch7RAI          INTEGER,
            fa8e1et100E1Ch8RAI          INTEGER,
            
            fa8e1et100E1Ch1LOMF         INTEGER,
            fa8e1et100E1Ch2LOMF         INTEGER,
            fa8e1et100E1Ch3LOMF         INTEGER,
            fa8e1et100E1Ch4LOMF         INTEGER,
            fa8e1et100E1Ch5LOMF         INTEGER,
            fa8e1et100E1Ch6LOMF         INTEGER,
            fa8e1et100E1Ch7LOMF         INTEGER,
            fa8e1et100E1Ch8LOMF         INTEGER,
            
            fa8e1et100E1Ch1Active       INTEGER,
            fa8e1et100E1Ch2Active       INTEGER,
            fa8e1et100E1Ch3Active       INTEGER,
            fa8e1et100E1Ch4Active       INTEGER,
            fa8e1et100E1Ch5Active       INTEGER,
            fa8e1et100E1Ch6Active       INTEGER,
            fa8e1et100E1Ch7Active       INTEGER,
            fa8e1et100E1Ch8Active       INTEGER,
            
            fa8e1et100E1Ch1LoopBack     INTEGER,
            fa8e1et100E1Ch2LoopBack     INTEGER,
            fa8e1et100E1Ch3LoopBack     INTEGER,
            fa8e1et100E1Ch4LoopBack     INTEGER,
            fa8e1et100E1Ch5LoopBack     INTEGER,
            fa8e1et100E1Ch6LoopBack     INTEGER,
            fa8e1et100E1Ch7LoopBack     INTEGER,
            fa8e1et100E1Ch8LoopBack     INTEGER,
            
            fa8e1et100FxLink            INTEGER,
            fa8e1et100FxLaser           INTEGER,
            fa8e1et100FxActive          INTEGER,
            fa8e1et100FxLaserOutput     INTEGER,
            fa8e1et100FxOpMode          INTEGER,

            fa8e1et100UtpLink           INTEGER,
            fa8e1et100UtpStatus         INTEGER,
            fa8e1et100UtpFlowCtrlSts    INTEGER,
            fa8e1et100UtpMode           INTEGER,
            fa8e1et100UtpFlowCtrl       INTEGER,

            fa8e1et100SpeedLimit        Integer32,
            fa8e1et100VlanAware         INTEGER,
            fa8e1et100VlanID            Integer32,

            fa8e1et100RemoteDevice      INTEGER,
            fa8e1et100RemotePower       INTEGER,

            fa8e1et100TimingSource      INTEGER,
            fa8e1et100FCSofGFP          INTEGER,
            fa8e1et100AutoChAdjust      INTEGER,
            fa8e1et100PayloadScramble   INTEGER,
            fa8e1et100Failover          INTEGER,

            fa8e1et100LOM               INTEGER,
            fa8e1et100SQM               INTEGER,
            fa8e1et100CRC               INTEGER,
            fa8e1et100LOA               INTEGER,
            fa8e1et100LFD               INTEGER,
            fa8e1et100DDTO              INTEGER,

            fa8e1et100VcatMember1       INTEGER,
            fa8e1et100VcatMember2       INTEGER,
            fa8e1et100VcatMember3       INTEGER,
            fa8e1et100VcatMember4       INTEGER,
            fa8e1et100VcatMember5       INTEGER,
            fa8e1et100VcatMember6       INTEGER,
            fa8e1et100VcatMember7       INTEGER,
            fa8e1et100VcatMember8       INTEGER,
            
            fa8e1et100SnmpChannel1      INTEGER,
            fa8e1et100SnmpChannel2      INTEGER,
            fa8e1et100SnmpChannel3      INTEGER,
            fa8e1et100SnmpChannel4      INTEGER,
   --         fa8e1et100SnmpChannel5      INTEGER,

            fa8e1et100ErrSec            Counter32,
            fa8e1et100ErrFreeSec        Counter32,
            fa8e1et100ServErrSec        Counter32,
            fa8e1et100BertFunction      INTEGER,
            fa8e1et100ClrBertData       INTEGER,
            fa8e1et100BertE1Channel     INTEGER,

            fa8e1et100RmonFunction      INTEGER,
            fa8e1et100RmonTx            DisplayString,
            fa8e1et100RmonRx            DisplayString,
            fa8e1et100ClrRmonTx         INTEGER,
            fa8e1et100ClrRmonRx         INTEGER,

            fa8e1et100Sfp               INTEGER,
            fa8e1et100SfpVendor         DisplayString,
            fa8e1et100SfpPartNo         DisplayString,
            fa8e1et100SfpFiberType      INTEGER,
            fa8e1et100SfpTxWaveLen      DisplayString,
            fa8e1et100SfpRxWaveLen      DisplayString,
            fa8e1et100SfpLinkLen        DisplayString,
            fa8e1et100SfpModelID        DisplayString,
            fa8e1et100SfpVersion        DisplayString,
            fa8e1et100SfpModelType      DisplayString,

            fa8e1et100DDInformation     INTEGER,
            fa8e1et100DDTxPower         DisplayString,
            fa8e1et100DDRxPower         DisplayString,
            fa8e1et100DDRxSens          DisplayString,
            fa8e1et100DDTemp            DisplayString,
            fa8e1et100DDBias            DisplayString,
            fa8e1et100DDVoltage         DisplayString,
            
            fa8e1et100ChannelDefect      INTEGER,
            fa8e1et100LoopDetection      INTEGER,
            
            fa8e1et100LoopCh1      INTEGER,
            fa8e1et100LoopCh2      INTEGER,
            fa8e1et100LoopCh3      INTEGER,
            fa8e1et100LoopCh4      INTEGER,
            fa8e1et100LoopCh5      INTEGER,
            fa8e1et100LoopCh6      INTEGER,
            fa8e1et100LoopCh7      INTEGER,
            fa8e1et100LoopCh8      INTEGER,
                       
            fa8e1et100DefectCh1      INTEGER,
            fa8e1et100DefectCh2      INTEGER,
            fa8e1et100DefectCh3      INTEGER,
            fa8e1et100DefectCh4      INTEGER,
            fa8e1et100DefectCh5      INTEGER,
            fa8e1et100DefectCh6      INTEGER,
            fa8e1et100DefectCh7      INTEGER,            
            fa8e1et100DefectCh8      INTEGER,
            fa8e1et100FxSignal		 INTEGER,
            fa8e1et100VlanMode		 INTEGER               
                }  


        fa8e1et100ChassisIndex OBJECT-TYPE
            SYNTAX  Integer32 (0..9)
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "A unique value for each card.
                It starts from 0 to 9 contiguously."
            ::= { fa8e1et100Entry 1 }

        fa8e1et100SlotIndex OBJECT-TYPE
            SYNTAX  Integer32 (1..20)
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "A unique value for each card.
                It starts from 1 to 20 contiguously."
            ::= { fa8e1et100Entry 2 }

        fa8e1et100SideIndex OBJECT-TYPE
            SYNTAX  INTEGER {
                local(1),
                remoteA(2),
                remoteB(3),
                remoteC(4),
                remoteD(5)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "A unique value for each card. It is the card location:
                1:Local area
                2:Remote A or Remote area
                3:Remote B area
                4:Remote C area
                5:Remote D area"
            ::= { fa8e1et100Entry 3 }

        fa8e1et100CardHWVer OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card hardware version x.xxx"
            ::= { fa8e1et100Entry 4 }

        fa8e1et100CardFWVer OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card firmware version x.xxx"
            ::= { fa8e1et100Entry 5 }

        fa8e1et100CardCPLDVer OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card CPLD version x.xxx"
            ::= { fa8e1et100Entry 6 }

        fa8e1et100CardFPGAVer OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card FPGA version x.xxx"
            ::= { fa8e1et100Entry 7 }

        fa8e1et100Model  OBJECT-TYPE
            SYNTAX  INTEGER {
                fa8E1Et100T(6600),
                fa8E1Et100S(6700)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "Card Type:
                6600:8E1-ET100T
                6700:8E1-ET100S"
            ::= { fa8e1et100Entry 8 }

        fa8e1et100SystemStatus  OBJECT-TYPE
            SYNTAX  INTEGER {
                normal(1),
                alarm(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card system status:
                1:Normal
                2:Alarm"
	        ::= { fa8e1et100Entry 9 }

        fa8e1et100DeviceActive  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card active:
                1:Disable 
                2:Enable"
            ::= { fa8e1et100Entry 10 }

--        fa8e1et100DeviceReset  OBJECT-TYPE
--            SYNTAX  INTEGER {
--                off(1),
--                trigger(2)
--            }
--            MAX-ACCESS  read-write
--            STATUS  current
--            DESCRIPTION
--                "8E1-ET100(T/S) Series card device reset:
--                1:Off
--                2:Trigger"
--            ::= { fa8e1et100Entry 11 }

        fa8e1et100SetToDefault  OBJECT-TYPE
            SYNTAX  INTEGER {
                off(1),
                act(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card port set to default:
                1:Off
                2:Trigger"
            ::= { fa8e1et100Entry 12 }

        fa8e1et100E1Ch1Singal  OBJECT-TYPE
            SYNTAX  INTEGER {
                singalLoss(1),
                normal(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 1 signal status:
                1:Singal Loss
                2:Normal"
            ::= { fa8e1et100Entry 13 }

        fa8e1et100E1Ch2Singal  OBJECT-TYPE
            SYNTAX  INTEGER {
                singalLoss(1),
                normal(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 2 signal status:
                1:Singal Loss
                2:Normal"
            ::= { fa8e1et100Entry 14 }

        fa8e1et100E1Ch3Singal  OBJECT-TYPE
            SYNTAX  INTEGER {
                singalLoss(1),
                normal(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 3 signal status:
                1:Singal Loss
                2:Normal"
            ::= { fa8e1et100Entry 15 }

        fa8e1et100E1Ch4Singal  OBJECT-TYPE
            SYNTAX  INTEGER {
                singalLoss(1),
                normal(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 4 signal status:
                1:Singal Loss
                2:Normal"
            ::= { fa8e1et100Entry 16 }

        fa8e1et100E1Ch5Singal  OBJECT-TYPE
            SYNTAX  INTEGER {
                singalLoss(1),
                normal(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 5 signal status:
                1:Singal Loss
                2:Normal"
            ::= { fa8e1et100Entry 17 }

        fa8e1et100E1Ch6Singal  OBJECT-TYPE
            SYNTAX  INTEGER {
                singalLoss(1),
                normal(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 6 signal status:
                1:Singal Loss
                2:Normal"
            ::= { fa8e1et100Entry 18 }
            
        fa8e1et100E1Ch7Singal  OBJECT-TYPE
            SYNTAX  INTEGER {
                singalLoss(1),
                normal(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 7 signal status:
                1:Singal Loss
                2:Normal"
            ::= { fa8e1et100Entry 19 }
            
        fa8e1et100E1Ch8Singal  OBJECT-TYPE
            SYNTAX  INTEGER {
                singalLoss(1),
                normal(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 8 signal status:
                1:Singal Loss
                2:Normal"
            ::= { fa8e1et100Entry 20 }
                                    
        fa8e1et100E1Ch1Sync  OBJECT-TYPE
            SYNTAX  INTEGER {
                syncLoss(1),
                sync(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 1 sync status:
                1:Sync Loss
                2:Sync"
            ::= { fa8e1et100Entry 21 }

        fa8e1et100E1Ch2Sync  OBJECT-TYPE
            SYNTAX  INTEGER {
                syncLoss(1),
                sync(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 2 sync status:
                1:Sync Loss
                2:Sync"
            ::= { fa8e1et100Entry 22 }

        fa8e1et100E1Ch3Sync  OBJECT-TYPE
            SYNTAX  INTEGER {
                syncLoss(1),
                sync(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 3 sync status:
                1:Sync Loss
                2:Sync"
            ::= { fa8e1et100Entry 23 }

        fa8e1et100E1Ch4Sync  OBJECT-TYPE
            SYNTAX  INTEGER {
                syncLoss(1),
                sync(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 4 sync status:
                1:Sync Loss
                2:Sync"
            ::= { fa8e1et100Entry 24 }

        fa8e1et100E1Ch5Sync  OBJECT-TYPE
            SYNTAX  INTEGER {
                syncLoss(1),
                sync(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 5 sync status:
                1:Sync Loss
                2:Sync"
            ::= { fa8e1et100Entry 25 }

        fa8e1et100E1Ch6Sync  OBJECT-TYPE
            SYNTAX  INTEGER {
                syncLoss(1),
                sync(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 6 sync status:
                1:Sync Loss
                2:Sync"
            ::= { fa8e1et100Entry 26 }

        fa8e1et100E1Ch7Sync  OBJECT-TYPE
            SYNTAX  INTEGER {
                syncLoss(1),
                sync(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 7 sync status:
                1:Sync Loss
                2:Sync"
            ::= { fa8e1et100Entry 27 }

        fa8e1et100E1Ch8Sync  OBJECT-TYPE
            SYNTAX  INTEGER {
                syncLoss(1),
                sync(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 8 sync status:
                1:Sync Loss
                2:Sync"
            ::= { fa8e1et100Entry 28 }

        fa8e1et100E1Ch1RecvAIS  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 1 receive AIS status:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 29 }

        fa8e1et100E1Ch2RecvAIS  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 2 receive AIS status:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 30 }

        fa8e1et100E1Ch3RecvAIS  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 3 receive AIS status:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 31 }

        fa8e1et100E1Ch4RecvAIS  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 4 receive AIS status:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 32 }

        fa8e1et100E1Ch5RecvAIS  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 5 receive AIS status:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 33 }

        fa8e1et100E1Ch6RecvAIS  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 6 receive AIS status:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 34 }
            
        fa8e1et100E1Ch7RecvAIS  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 7 receive AIS status:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 35 }
            
        fa8e1et100E1Ch8RecvAIS  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 8 receive AIS status:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 36 }                        

        fa8e1et100E1Ch1ConnType  OBJECT-TYPE
            SYNTAX  INTEGER {
                rj48c(1),
                bnc(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 1 connector type:
                1:RJ-48C
                2:BNC"
            ::= { fa8e1et100Entry 37 }

        fa8e1et100E1Ch2ConnType  OBJECT-TYPE
            SYNTAX  INTEGER {
                rj48c(1),
                bnc(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 2 connector type:
                1:RJ-48C
                2:BNC"
            ::= { fa8e1et100Entry 38 }

        fa8e1et100E1Ch3ConnType  OBJECT-TYPE
            SYNTAX  INTEGER {
                rj48c(1),
                bnc(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 3 connector type:
                1:RJ-48C
                2:BNC"
            ::= { fa8e1et100Entry 39 }

        fa8e1et100E1Ch4ConnType  OBJECT-TYPE
            SYNTAX  INTEGER {
                rj48c(1),
                bnc(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 4 connector type:
                1:RJ-48C
                2:BNC"
            ::= { fa8e1et100Entry 40 }

        fa8e1et100E1Ch5ConnType  OBJECT-TYPE
            SYNTAX  INTEGER {
                rj48c(1),
                bnc(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 5 connector type:
                1:RJ-48C
                2:BNC"
            ::= { fa8e1et100Entry 41 }

        fa8e1et100E1Ch6ConnType  OBJECT-TYPE
            SYNTAX  INTEGER {
                rj48c(1),
                bnc(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 6 connector type:
                1:RJ-48C
                2:BNC"
            ::= { fa8e1et100Entry 42 }
            
        fa8e1et100E1Ch7ConnType  OBJECT-TYPE
            SYNTAX  INTEGER {
                rj48c(1),
                bnc(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 7 connector type:
                1:RJ-48C
                2:BNC"
            ::= { fa8e1et100Entry 43 }
            
        fa8e1et100E1Ch8ConnType  OBJECT-TYPE
            SYNTAX  INTEGER {
                rj48c(1),
                bnc(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 8 connector type:
                1:RJ-48C
                2:BNC"
            ::= { fa8e1et100Entry 44 }                        

        fa8e1et100E1Ch1RAI  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 1 RAI status:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 45 }

        fa8e1et100E1Ch2RAI  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 2 RAI status:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 46 }

        fa8e1et100E1Ch3RAI  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 3 RAI status:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 47 }

        fa8e1et100E1Ch4RAI  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 4 RAI status:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 48 }

        fa8e1et100E1Ch5RAI  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 5 RAI status:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 49 }
            
        fa8e1et100E1Ch6RAI  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 6 RAI status:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 50 }
            
        fa8e1et100E1Ch7RAI  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 7 RAI status:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 51 }
            
        fa8e1et100E1Ch8RAI  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 8 RAI status:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 52 }                                    

        fa8e1et100E1Ch1LOMF  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 1 LOMF status:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 53 }

        fa8e1et100E1Ch2LOMF  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 2 LOMF status:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 54 }

        fa8e1et100E1Ch3LOMF  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 3 LOMF status:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 55 }

        fa8e1et100E1Ch4LOMF  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 4 LOMF status:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 56 }

        fa8e1et100E1Ch5LOMF  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 5 LOMF status:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 57 }
            
        fa8e1et100E1Ch6LOMF  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 6 LOMF status:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 58 }
            
        fa8e1et100E1Ch7LOMF  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 7 LOMF status:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 59 }
            
        fa8e1et100E1Ch8LOMF  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 8 LOMF status:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 60 }                                    

        fa8e1et100E1Ch1Active  OBJECT-TYPE
            SYNTAX  INTEGER {
                inactive(1),
                active(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 1 active status:
                1:Inactive
                2:Active"
            ::= { fa8e1et100Entry 61 }

        fa8e1et100E1Ch2Active  OBJECT-TYPE
            SYNTAX  INTEGER {
                inactive(1),
                active(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 2 active status:
                1:Inactive
                2:Active"
            ::= { fa8e1et100Entry 62 }

        fa8e1et100E1Ch3Active  OBJECT-TYPE
            SYNTAX  INTEGER {
                inactive(1),
                active(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 3 active status:
                1:Inactive
                2:Active"
            ::= { fa8e1et100Entry 63 }

        fa8e1et100E1Ch4Active  OBJECT-TYPE
            SYNTAX  INTEGER {
                inactive(1),
                active(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 4 active status:
                1:Inactive
                2:Active"
            ::= { fa8e1et100Entry 64 }

        fa8e1et100E1Ch5Active  OBJECT-TYPE
            SYNTAX  INTEGER {
                inactive(1),
                active(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 5 active status:
                1:Inactive
                2:Active"
            ::= { fa8e1et100Entry 65 }
            
        fa8e1et100E1Ch6Active  OBJECT-TYPE
            SYNTAX  INTEGER {
                inactive(1),
                active(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 6 active status:
                1:Inactive
                2:Active"
            ::= { fa8e1et100Entry 66 }
            
        fa8e1et100E1Ch7Active  OBJECT-TYPE
            SYNTAX  INTEGER {
                inactive(1),
                active(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 7 active status:
                1:Inactive
                2:Active"
            ::= { fa8e1et100Entry 67 }
            
        fa8e1et100E1Ch8Active  OBJECT-TYPE
            SYNTAX  INTEGER {
                inactive(1),
                active(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 8 active status:
                1:Inactive
                2:Active"
            ::= { fa8e1et100Entry 68 }                                    

        fa8e1et100E1Ch1LoopBack  OBJECT-TYPE
            SYNTAX  INTEGER {
                off(1),
                rlb(3)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card port E1 channel 1 loop back:
                1:Off
                3:RLB (Max used 4 channels)"
            ::= { fa8e1et100Entry 69 }

        fa8e1et100E1Ch2LoopBack  OBJECT-TYPE
            SYNTAX  INTEGER {
                off(1),
                rlb(3)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card port E1 channel 2 loop back:
                1:Off
                3:RLB (Max used 4 channels)"
            ::= { fa8e1et100Entry 70 }

        fa8e1et100E1Ch3LoopBack  OBJECT-TYPE
            SYNTAX  INTEGER {
                off(1),
                rlb(3)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card port E1 channel 3 loop back:
                1:Off
                3:RLB (Max used 4 channels)"
            ::= { fa8e1et100Entry 71 }

        fa8e1et100E1Ch4LoopBack  OBJECT-TYPE
            SYNTAX  INTEGER {
                off(1),
                rlb(3)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card port E1 channel 4 loop back:
                1:Off
                3:RLB (Max used 4 channels)"
            ::= { fa8e1et100Entry 72 }

        fa8e1et100E1Ch5LoopBack  OBJECT-TYPE
            SYNTAX  INTEGER {
                off(1),
                rlb(3)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card port E1 channel 5 loop back:
                1:Off
                3:RLB (Max used 4 channels)"
            ::= { fa8e1et100Entry 73 }
            
        fa8e1et100E1Ch6LoopBack  OBJECT-TYPE
            SYNTAX  INTEGER {
                off(1),
                rlb(3)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card port E1 channel 6 loop back:
                1:Off
                3:RLB (Max used 4 channels)"
            ::= { fa8e1et100Entry 74 }
            
        fa8e1et100E1Ch7LoopBack  OBJECT-TYPE
            SYNTAX  INTEGER {
                off(1),
                rlb(3)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card port E1 channel 7 loop back:
                1:Off
                3:RLB (Max used 4 channels)"
            ::= { fa8e1et100Entry 75 }
            
        fa8e1et100E1Ch8LoopBack  OBJECT-TYPE
            SYNTAX  INTEGER {
                off(1),
                rlb(3)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card port E1 channel 8 loop back:
                1:Off
                3:RLB (Max used 4 channels)"
            ::= { fa8e1et100Entry 76 }                                    

        fa8e1et100FxLink  OBJECT-TYPE
            SYNTAX  INTEGER {
                linkDown(1),
                linkUp(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100S Series card Fiber siganl detect status:
                1:Link down or Fiber unplugged
                2:Link up or Singal detected"
            ::= { fa8e1et100Entry 77 }

        fa8e1et100FxLaser  OBJECT-TYPE
            SYNTAX  INTEGER {
                normal(1),
                error(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100S Series card laser status:
                1:Normal
                2:Error"
            ::= { fa8e1et100Entry 78 }

        fa8e1et100FxActive  OBJECT-TYPE
            SYNTAX  INTEGER {
                inactive(1),
                active(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100S Series card Fiber active:
                1:Inactive
                2:Active"
            ::= { fa8e1et100Entry 79 }

        fa8e1et100FxLaserOutput  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100S Series card laser output:
                1:disable
                2:Enable"
            ::= { fa8e1et100Entry 80 }

        fa8e1et100FxOpMode  OBJECT-TYPE
            SYNTAX  INTEGER {
                switch(1),
                convert(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100S Series card operation mode:
                1:Switch
                2:Convert"
            ::= { fa8e1et100Entry 81 }

        fa8e1et100UtpLink  OBJECT-TYPE
            SYNTAX  INTEGER {
                linkDown(1),
                linkUp(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100T Series card UTP link status:
                1:Link Down
                2:Link Up"
            ::= { fa8e1et100Entry 82 }

        fa8e1et100UtpStatus  OBJECT-TYPE
            SYNTAX  INTEGER {
                none(1),
                link10MbpsHDX(2),
                link10MbpsFDX(3),
                link100MbpsHDX(4),
                link100MbpsFDX(5)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100T Series card UTP link mode status:
                1:None, Maybe link down
                2:Link at 10Mbps, Half duplex
                3:Link at 10Mbps, Full duplex
                4:Link at 100Mbps, Half duplex
                5:Link at 100Mbps, Full duplex"
            ::= { fa8e1et100Entry 83 }

        fa8e1et100UtpFlowCtrlSts  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100T Series card UTP flow control status:
                1:Disable
                2:Enable"
            ::= { fa8e1et100Entry 84 }

        fa8e1et100UtpMode  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                autoNegotiation(2),
                force10MbpsHDX(3),
                force10MbpsFDX(4),
                force100MbpsHDX(5),
                force100MbpsFDX(6)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100T) Series card UTP mode:
                1:Disable
                2:Enable and autoNegotiation
                3:Enable and force to 10Mbps, Half duplex
                4:Enable and force to 10Mbps, Full duplex
                5:Enable and force to 100Mbps, Half duplex
                6:Enable and force to 100Mbps, Full duplex"
            ::= { fa8e1et100Entry 85 }

        fa8e1et100UtpFlowCtrl  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100T Series card UTP flow control:
                1:Disable
                2:Enable"
            ::= { fa8e1et100Entry 86 }

        fa8e1et100SpeedLimit  OBJECT-TYPE
            SYNTAX  Integer32 (0..3125)
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card speed limit:
                Limited = this value * 32Kbps,
                this value is restricted to 0 ~ 3125, 0 to disable"
            ::= { fa8e1et100Entry 87 }

        fa8e1et100VlanAware  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card 802.1q VLAN tag aware:
                1:Disable
                2:Enable"
            ::= { fa8e1et100Entry 88 }

        fa8e1et100VlanID  OBJECT-TYPE
            SYNTAX  Integer32 (1..4094)
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card VLAN ID:
                The ID is restricted to 1 ~ 4094"
            ::= { fa8e1et100Entry 89 }

        fa8e1et100RemoteDevice  OBJECT-TYPE
            SYNTAX  INTEGER {
                linkDown(1),
                linkUp(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "FRM220A-8E1 Series card remote device status:
                1:Link Down
                2:Link Up"
            ::= { fa8e1et100Entry 90 }

        fa8e1et100RemotePower  OBJECT-TYPE
            SYNTAX  INTEGER {
                normal(1),
                off(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card remote device power status:
                1:Normal
                2:Power off"
            ::= { fa8e1et100Entry 91 }

        fa8e1et100TimingSource  OBJECT-TYPE
            SYNTAX  INTEGER {
                recoveryFromE1Channel1(1),
                recoveryFromE1Channel2(2),
                recoveryFromE1Channel3(3),
                recoveryFromE1Channel4(4),
                recoveryFromE1Channel5(5),
                recoveryFromE1Channel6(6),
                recoveryFromE1Channel7(7),
                recoveryFromE1Channel8(8),
                internalOscillator(9)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card clock:
                1:Recovery from E1 channel 1
                2:Recovery from E1 channel 2
                3:Recovery from E1 channel 3
                4:Recovery from E1 channel 4
                5:Recovery from E1 channel 5
                6:Recovery from E1 channel 6
                7:Recovery from E1 channel 7
                8:Recovery from E1 channel 8
                9:Internal oscillatro"
            ::= { fa8e1et100Entry 92 }

        fa8e1et100FCSofGFP  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card FCS of GFP:
                1:Disable
                2:Enable"
            ::= { fa8e1et100Entry 93 }

        fa8e1et100AutoChAdjust  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card auto channel Bdjust:
                1:Disable
                2:Enable"
            ::= { fa8e1et100Entry 94 }

        fa8e1et100PayloadScramble  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card payload scramble:
                1:Disable
                2:Enable"
            ::= { fa8e1et100Entry 95 }

      fa8e1et100Failover  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card failover:
                1:Disable
                2:Enable"
            ::= { fa8e1et100Entry 96 }

        fa8e1et100LOM  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card LOM status:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 97 }

        fa8e1et100SQM  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card SQM status:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 98 }

        fa8e1et100CRC  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card CRC status:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 99 }

        fa8e1et100LOA  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card LOA status:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 100 }

        fa8e1et100LFD  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card LFD status:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 101 }

        fa8e1et100DDTO  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card DDTO status:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 102 }

        fa8e1et100VcatMember1  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card VACT member 1:
                1:Disable
                2:Enable"
            ::= { fa8e1et100Entry 103 }

        fa8e1et100VcatMember2  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card VACT member 2:
                1:Disable
                2:Enable"
            ::= { fa8e1et100Entry 104 }

        fa8e1et100VcatMember3  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card VACT member 3:
                1:Disable
                2:Enable"
            ::= { fa8e1et100Entry 105 }

        fa8e1et100VcatMember4  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card VACT member 4:
                1:Disable
                2:Enable"
            ::= { fa8e1et100Entry 106 }

        fa8e1et100VcatMember5  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card VACT member 5:
                1:Disable
                2:Enable"
            ::= { fa8e1et100Entry 107 }

        fa8e1et100VcatMember6  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card VACT member 6:
                1:Disable
                2:Enable"
            ::= { fa8e1et100Entry 108 }
            
        fa8e1et100VcatMember7  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card VACT member 7:
                1:Disable
                2:Enable"
            ::= { fa8e1et100Entry 109 }
            
        fa8e1et100VcatMember8  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card VACT member 8:
                1:Disable
                2:Enable"
            ::= { fa8e1et100Entry 110 }                        

        fa8e1et100SnmpChannel1  OBJECT-TYPE
            SYNTAX  INTEGER {
                noUse(1),
                use(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card SNMP channel 1:
                1:No use
                2:Use"
            ::= { fa8e1et100Entry 111 }

        fa8e1et100SnmpChannel2  OBJECT-TYPE
            SYNTAX  INTEGER {
                noUse(1),
                use(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card SNMP channel 2:
                1:No use
                2:Use"
            ::= { fa8e1et100Entry 112 }

        fa8e1et100SnmpChannel3  OBJECT-TYPE
            SYNTAX  INTEGER {
                noUse(1),
                use(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card SNMP channel 3:
                1:No use
                2:Use"
            ::= { fa8e1et100Entry 113 }

        fa8e1et100SnmpChannel4  OBJECT-TYPE
            SYNTAX  INTEGER {
                noUse(1),
                use(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card SNMP channel 4:
                1:No use
                2:Use"
            ::= { fa8e1et100Entry 114 }

   --     fa8e1et100SnmpChannel5  OBJECT-TYPE
   --         SYNTAX  INTEGER {
    --            noUse(1),
     --           use(2)
    --        }
    --        MAX-ACCESS  read-write
     --       STATUS  current
      --      DESCRIPTION
      --          "8E1-ET100(T/S) Series card SNMP channel 5:
      --          1:No use
      --          2:Use"
      --      ::= { fa8e1et100Entry 115 }

        fa8e1et100ErrSec  OBJECT-TYPE
            SYNTAX  Counter32
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card, errored seconds of BERT result."
            ::= { fa8e1et100Entry 116 }

        fa8e1et100ErrFreeSec  OBJECT-TYPE
            SYNTAX  Counter32
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card, errored free seconds of BERT result."
            ::= { fa8e1et100Entry 117 }

        fa8e1et100ServErrSec  OBJECT-TYPE
            SYNTAX  Counter32
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card, severely errored seconds of BERT result."
            ::= { fa8e1et100Entry 118 }

        fa8e1et100BertFunction  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card bert function:
                1:Disable
                2:Enable"
            ::= { fa8e1et100Entry 119 }

        fa8e1et100ClrBertData  OBJECT-TYPE
            SYNTAX  INTEGER {
                normal(1),
                clear(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card bert data clear:
                1:Normal
                2:Clear"
            ::= { fa8e1et100Entry 120 }

        fa8e1et100BertE1Channel  OBJECT-TYPE
            SYNTAX  INTEGER {
                e1Channel1(1),
                e1Channel2(2),
                e1Channel3(3),
                e1Channel4(4),
                e1Channel5(5),
                e1Channel6(6),
                e1Channel7(7),
                e1Channel8(8)                
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card bert E1 channel number:
                1:E1 channel 1
                2:E1 channel 2
                3:E1 channel 3
                4:E1 channel 4
                5:E1 channel 5
                6:E1 channel 6
                7:E1 channel 7
                8:E1 channel 8"
            ::= { fa8e1et100Entry 121 }

        fa8e1et100RmonFunction  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series RMON function :
                1:Disable
                2:Enable"
            ::= { fa8e1et100Entry 122 }

        fa8e1et100RmonTx  OBJECT-TYPE
        SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card RMON Tx counter."
            ::= { fa8e1et100Entry 123 }

        fa8e1et100RmonRx  OBJECT-TYPE
        SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card RMON Rx counter."
            ::= { fa8e1et100Entry 124 }

        fa8e1et100ClrRmonTx  OBJECT-TYPE
            SYNTAX  INTEGER {
                normal(1),
                clear(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card clear RMON Tx counter:
                1:Normal
                1:Clear"
            ::= { fa8e1et100Entry 125 }

        fa8e1et100ClrRmonRx  OBJECT-TYPE
            SYNTAX  INTEGER {
                normal(1),
                clear(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card clear RMON Rx counter:
                1:Normal
                1:Clear"
            ::= { fa8e1et100Entry 126 }

        fa8e1et100Sfp  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card, SFP existed:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 127 }

        fa8e1et100SfpVendor  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card, Vendor name of SFP."
            ::= { fa8e1et100Entry 128 }

        fa8e1et100SfpPartNo  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card, Vendor part number of SFP."
            ::= { fa8e1et100Entry 129}

        fa8e1et100SfpFiberType  OBJECT-TYPE
            SYNTAX  INTEGER{
                unknow(1),
                single(2),
                multi(3)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card, Fiber Type of SFP."
            ::= { fa8e1et100Entry 130 }

        fa8e1et100SfpTxWaveLen  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card, Tx Wave length of SFP."
            ::= { fa8e1et100Entry 131 }

        fa8e1et100SfpRxWaveLen  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card, Rx Wave length of SFP."
            ::= { fa8e1et100Entry 132 }

        fa8e1et100SfpLinkLen  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card, Link length of SFP."
            ::= { fa8e1et100Entry 133 }

        fa8e1et100SfpModelID  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card, model ID of SFP."
            ::= { fa8e1et100Entry 134}

        fa8e1et100SfpVersion  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card, the version of SFP."
            ::= { fa8e1et100Entry 135}

        fa8e1et100SfpModelType  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card, model type of SFP."
            ::= { fa8e1et100Entry 136}

        fa8e1et100DDInformation  OBJECT-TYPE
            SYNTAX  INTEGER{
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card, D/D information of SFP Supported:
                1:No,
                2:Yes"
            ::= { fa8e1et100Entry 137 }

        fa8e1et100DDTxPower  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card, Tx power of D/D information."
            ::= { fa8e1et100Entry 138 }

        fa8e1et100DDRxPower  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card, Rx power of D/D information."
            ::= { fa8e1et100Entry 139 }

        fa8e1et100DDRxSens  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card, Sensitivity of D/D information."
            ::= { fa8e1et100Entry 140 }

        fa8e1et100DDTemp  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card, Temperature of D/D information in degree C."
            ::= { fa8e1et100Entry 141 }

        fa8e1et100DDBias  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card, BIAS of D/D information."
            ::= { fa8e1et100Entry 142 }

        fa8e1et100DDVoltage  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card, Voltage of D/D information."
            ::= { fa8e1et100Entry 143}
            
            
        fa8e1et100ChannelDefect  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                set-1E-4(4),
                set-1E-6(6)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card Channel Defect:
                1:Disable
                4:1E-4
                6:1E-6"
            ::= { fa8e1et100Entry 144 } 
 
        fa8e1et100LoopDetection  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card Loop Detection:
                1:Disable
                2:Enable
                "
            ::= { fa8e1et100Entry 145 }             
            
        fa8e1et100LoopCh1  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 1 Loop Check State:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 146 }            

        fa8e1et100LoopCh2  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 2 Loop Check State:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 147 } 
            
        fa8e1et100LoopCh3  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 3 Loop Check State:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 148 } 
            
        fa8e1et100LoopCh4  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 4 Loop Check State:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 149 } 
            
        fa8e1et100LoopCh5  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 5 Loop Check State:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 150 } 

        fa8e1et100LoopCh6  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 6 Loop Check State:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 151 }
            
        fa8e1et100LoopCh7  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 7 Loop Check State:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 152 }
            
        fa8e1et100LoopCh8  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 8 Loop Check State:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 153 }                        


            
        fa8e1et100DefectCh1  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 1 Defect Status:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 154 }            

        fa8e1et100DefectCh2  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 2 Defect Status:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 155 }    
            
        fa8e1et100DefectCh3  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 3 Defect Status:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 156 }    
            
        fa8e1et100DefectCh4  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 4 Defect Status:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 157 }    
            
        fa8e1et100DefectCh5  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 5 Defect Status:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 158 }              

        fa8e1et100DefectCh6  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 6 Defect Status:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 159 }

        fa8e1et100DefectCh7  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 7 Defect Status:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 160 }
            
        fa8e1et100DefectCh8  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card E1 channel 8 Defect Status:
                1:No
                2:Yes"
            ::= { fa8e1et100Entry 161 }

         fa8e1et100FxSignal  OBJECT-TYPE
            SYNTAX  INTEGER {
                unplugged(1),
                detected(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "8E1-ET100(T/S) Series card Fiber signal detect(SD):
                1:Fiber unplugged
                2:Signal detected"
            ::= { fa8e1et100Entry 162 }
            
		fa8e1et100VlanMode	 OBJECT-TYPE
			SYNTAX  INTEGER {
                mode2(1),
                mode1(2)
            }
            MAX-ACCESS  read-write
            STATUS	current
            DESCRIPTION
            	"8E1-ET100(T/S) Series card Vlan Mode Setting:
            	1:Vlan Mode 2
            	2:Vlan Mode 1"
            ::= { fa8e1et100Entry 163}
            
            
		Fa8e1et100VlanEntry ::=
           SEQUENCE {
               fa8e1et100VlanChassisIndex	 Integer32,
               fa8e1et100VlanSlotIndex		 Integer32,
               fa8e1et100VlanSideIndex       INTEGER,
               
               fa8e1et100VlanEntryIndex	     INTEGER,
               fa8e1et100VlanTag             INTEGER,
               
               fa8e1et100Vlan0				 Integer32,
               fa8e1et100Vlan1               Integer32,
               fa8e1et100Vlan2               Integer32,
               fa8e1et100Vlan3               Integer32,
               fa8e1et100Vlan4               Integer32,
               fa8e1et100Vlan5               Integer32,
               fa8e1et100Vlan6               Integer32,
               fa8e1et100Vlan7               Integer32,
               fa8e1et100Vlan8               Integer32,
               fa8e1et100Vlan9               Integer32,
               fa8e1et100Vlan10              Integer32,
               fa8e1et100Vlan11              Integer32,
               fa8e1et100Vlan12              Integer32,
               fa8e1et100Vlan13              Integer32,
               fa8e1et100Vlan14              Integer32,
               fa8e1et100Vlan15              Integer32           
           }
           
    	   fa8e1et100VlanChassisIndex    OBJECT-TYPE
        	   SYNTAX  Integer32 (0..9)
        	   MAX-ACCESS  read-only
               STATUS  current
               DESCRIPTION
                "A unique value for each card.
                It starts from 0 to 9 contiguously."
               ::= { fa8e1et100VlanEntry 1 }            
               
           fa8e1et100VlanSlotIndex	 OBJECT-TYPE
           	   SYNTAX  Integer32 (1..20)
               MAX-ACCESS  read-only
               STATUS  current
               DESCRIPTION
                "A unique value for each card.
                It starts from 1 to 20 contiguously."
               ::= { fa8e1et100VlanEntry 2 }
               
           fa8e1et100VlanSideIndex   OBJECT-TYPE
               SYNTAX  INTEGER {
                local(1),
                remoteA(2),
                remoteB(3),
                remoteC(4),
                remoteD(5)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "A unique value for each card. It is the card location:
                1:Local area
                2:Remote A or Remote area
                3:Remote B area
                4:Remote C area
                5:Remote D area"
            ::= { fa8e1et100VlanEntry 3 }
            
           fa8e1et100VlanEntryIndex   OBJECT-TYPE
               SYNTAX  INTEGER {
                vlan0(0),
                vlan1(1),
                vlan2(2),
                vlan3(3),
                vlan4(4),
                vlan5(5),
                vlan6(6),
                vlan7(7),
                vlan8(8),
                vlan9(9),
                vlan10(10),
                vlan11(11),
                vlan12(12),
                vlan13(13),
                vlan14(14),
                vlan15(15)
               }
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
                "Vlan entry select index.
                 It start from 0 to 15."
               ::= { fa8e1et100VlanEntry 4 }
               
           fa8e1et100VlanTag   OBJECT-TYPE
               SYNTAX  INTEGER {
                   untouch(1),
                   addTag(2),
                   removeTag(3)
               } 
               MAX-ACCESS  read-write
               STATUS  current
               DESCRIPTION
               "Vlan tag.
                1:Untouch.
                2:Add tag.
                3:Remove tag."
               ::= { fa8e1et100VlanEntry 5 }
		
           fa8e1et100Vlan0   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 0 ID.
                It start from 0 to 4094."
               ::={ fa8e1et100VlanEntry 6 }
               
           fa8e1et100Vlan1   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 1 ID.
                It start from 0 to 4094."
               ::={ fa8e1et100VlanEntry 7 }
           
           fa8e1et100Vlan2   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 2 ID.
                It start from 0 to 4094."
               ::={ fa8e1et100VlanEntry 8 }
               
           fa8e1et100Vlan3   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 3 ID.
                It start from 0 to 4094."
               ::={ fa8e1et100VlanEntry 9 }    
               
           fa8e1et100Vlan4   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 4 ID.
                It start from 0 to 4094."
               ::={ fa8e1et100VlanEntry 10 }
               
           fa8e1et100Vlan5   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 5 ID.
                It start from 0 to 4094."
               ::={ fa8e1et100VlanEntry 11 }     
            
           fa8e1et100Vlan6   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 6 ID.
                It start from 0 to 4094."
               ::={ fa8e1et100VlanEntry 12 }
               
           fa8e1et100Vlan7   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 7 ID.
                It start from 0 to 4094."
               ::={ fa8e1et100VlanEntry 13 }
               
           fa8e1et100Vlan8   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 8 ID.
                It start from 0 to 4094."
               ::={ fa8e1et100VlanEntry 14 }           
           
           fa8e1et100Vlan9   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 9 ID.
                It start from 0 to 4094."
               ::={ fa8e1et100VlanEntry 15 }
               
           fa8e1et100Vlan10   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 10 ID.
                It start from 0 to 4094."
               ::={ fa8e1et100VlanEntry 16 }
               
           fa8e1et100Vlan11   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 11 ID.
                It start from 0 to 4094."
               ::={ fa8e1et100VlanEntry 17 }
               
           fa8e1et100Vlan12   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 12 ID.
                It start from 0 to 4094."
               ::={ fa8e1et100VlanEntry 18 }
               
           fa8e1et100Vlan13   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 13 ID.
                It start from 0 to 4094."
               ::={ fa8e1et100VlanEntry 19 }
               
           fa8e1et100Vlan14   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 14 ID.
                It start from 0 to 4094."
               ::={ fa8e1et100VlanEntry 20 }
               
           fa8e1et100Vlan15   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 15 ID.
                It start from 0 to 4094."
               ::={ fa8e1et100VlanEntry 21 } 


-- 16E1/ET100

fa16e1et100Project OBJECT IDENTIFIER ::= { faGswSnmp 6800 } 

fa16e1et100Cards  OBJECT IDENTIFIER ::= { fa16e1et100Project 1 }

    fa16e1et100Table  OBJECT-TYPE
        SYNTAX  SEQUENCE OF Fa16e1et100Entry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "A list of 16E1-ET100(T/S) series card entries."
		::= { fa16e1et100Cards 1 }

	fa16e1et100Entry  OBJECT-TYPE
		SYNTAX  Fa16e1et100Entry
		MAX-ACCESS  not-accessible
		STATUS  current
		DESCRIPTION
			"An entry containing management information applicable
			to a particular 16E1-ET100(T/S) series card."
		INDEX  { fa16e1et100ChassisIndex, fa16e1et100SlotIndex, fa16e1et100SideIndex }
		::= { fa16e1et100Table 1 }
		
	fa16e1et100VlanTable  OBJECT-TYPE
        SYNTAX  SEQUENCE OF Fa16e1et100VlanEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "A list of 16E1-ET100(T/S) series vlan trunking."
		::= { fa16e1et100Cards 2 }		
	
	fa16e1et100VlanEntry  OBJECT-TYPE
		SYNTAX  Fa16e1et100VlanEntry
		MAX-ACCESS  not-accessible
		STATUS  current
		DESCRIPTION
			"An entry containing vlan trunking applicable
			to a particular 16E1-ET100(T/S) series card."
		INDEX  { fa16e1et100VlanChassisIndex, fa16e1et100VlanSlotIndex, fa16e1et100VlanSideIndex }
		::= { fa16e1et100VlanTable 1 }

	Fa16e1et100Entry ::=
		SEQUENCE {
            fa16e1et100ChassisIndex      Integer32,
            fa16e1et100SlotIndex         Integer32,
            fa16e1et100SideIndex         INTEGER,
            fa16e1et100CardHWVer         DisplayString,
            fa16e1et100CardFWVer         DisplayString,
            fa16e1et100CardCPLDVer       DisplayString,
            fa16e1et100CardFPGAVer       DisplayString,

            fa16e1et100Model             INTEGER,
            fa16e1et100SystemStatus      INTEGER,
            fa16e1et100DeviceActive	    INTEGER,
--            fa16e1et100DeviceReset       INTEGER,
            fa16e1et100SetToDefault      INTEGER,

            fa16e1et100E1Ch1Singal       INTEGER,
            fa16e1et100E1Ch2Singal       INTEGER,
            fa16e1et100E1Ch3Singal       INTEGER,
            fa16e1et100E1Ch4Singal       INTEGER,
            fa16e1et100E1Ch5Singal       INTEGER,
            fa16e1et100E1Ch6Singal       INTEGER,
            fa16e1et100E1Ch7Singal       INTEGER,
            fa16e1et100E1Ch8Singal       INTEGER,
            fa16e1et100E1Ch9Singal       INTEGER,
            fa16e1et100E1Ch10Singal       INTEGER,
            fa16e1et100E1Ch11Singal       INTEGER,
            fa16e1et100E1Ch12Singal       INTEGER,
            fa16e1et100E1Ch13Singal       INTEGER,
            fa16e1et100E1Ch14Singal       INTEGER,
            fa16e1et100E1Ch15Singal       INTEGER,
            fa16e1et100E1Ch16Singal       INTEGER,
                        
            fa16e1et100E1Ch1Sync         INTEGER,
            fa16e1et100E1Ch2Sync         INTEGER,
            fa16e1et100E1Ch3Sync         INTEGER,
            fa16e1et100E1Ch4Sync         INTEGER,
            fa16e1et100E1Ch5Sync         INTEGER,
            fa16e1et100E1Ch6Sync         INTEGER,
            fa16e1et100E1Ch7Sync         INTEGER,
            fa16e1et100E1Ch8Sync         INTEGER,
            fa16e1et100E1Ch9Sync         INTEGER,
            fa16e1et100E1Ch10Sync         INTEGER,
            fa16e1et100E1Ch11Sync         INTEGER,
            fa16e1et100E1Ch12Sync         INTEGER,
            fa16e1et100E1Ch13Sync         INTEGER,
            fa16e1et100E1Ch14Sync         INTEGER,
            fa16e1et100E1Ch15Sync         INTEGER,
            fa16e1et100E1Ch16Sync         INTEGER,
 
            
            fa16e1et100E1Ch1RecvAIS      INTEGER,
            fa16e1et100E1Ch2RecvAIS      INTEGER,
            fa16e1et100E1Ch3RecvAIS      INTEGER,
            fa16e1et100E1Ch4RecvAIS      INTEGER,
            fa16e1et100E1Ch5RecvAIS      INTEGER,
            fa16e1et100E1Ch6RecvAIS      INTEGER,
            fa16e1et100E1Ch7RecvAIS      INTEGER,
            fa16e1et100E1Ch8RecvAIS      INTEGER,
            fa16e1et100E1Ch9RecvAIS      INTEGER,
            fa16e1et100E1Ch10RecvAIS      INTEGER,
            fa16e1et100E1Ch11RecvAIS      INTEGER,
            fa16e1et100E1Ch12RecvAIS      INTEGER,
            fa16e1et100E1Ch13RecvAIS      INTEGER,
            fa16e1et100E1Ch14RecvAIS      INTEGER,
            fa16e1et100E1Ch15RecvAIS      INTEGER,
            fa16e1et100E1Ch16RecvAIS      INTEGER,            
            
            
            fa16e1et100E1Ch1ConnType     INTEGER,
            fa16e1et100E1Ch2ConnType     INTEGER,
            fa16e1et100E1Ch3ConnType     INTEGER,
            fa16e1et100E1Ch4ConnType     INTEGER,
            fa16e1et100E1Ch5ConnType     INTEGER,
            fa16e1et100E1Ch6ConnType     INTEGER,
            fa16e1et100E1Ch7ConnType     INTEGER,
            fa16e1et100E1Ch8ConnType     INTEGER,
            fa16e1et100E1Ch9ConnType     INTEGER,
            fa16e1et100E1Ch10ConnType     INTEGER,
            fa16e1et100E1Ch11ConnType     INTEGER,
            fa16e1et100E1Ch12ConnType     INTEGER,
            fa16e1et100E1Ch13ConnType     INTEGER,
            fa16e1et100E1Ch14ConnType     INTEGER,
            fa16e1et100E1Ch15ConnType     INTEGER,
            fa16e1et100E1Ch16ConnType     INTEGER,            
            

            fa16e1et100E1Ch1RAI          INTEGER,
            fa16e1et100E1Ch2RAI          INTEGER,
            fa16e1et100E1Ch3RAI          INTEGER,
            fa16e1et100E1Ch4RAI          INTEGER,
            fa16e1et100E1Ch5RAI          INTEGER,
            fa16e1et100E1Ch6RAI          INTEGER,
            fa16e1et100E1Ch7RAI          INTEGER,
            fa16e1et100E1Ch8RAI          INTEGER,
            fa16e1et100E1Ch9RAI          INTEGER,
            fa16e1et100E1Ch10RAI          INTEGER,
            fa16e1et100E1Ch11RAI          INTEGER,
            fa16e1et100E1Ch12RAI          INTEGER,
            fa16e1et100E1Ch13RAI          INTEGER,
            fa16e1et100E1Ch14RAI          INTEGER,
            fa16e1et100E1Ch15RAI          INTEGER,
            fa16e1et100E1Ch16RAI          INTEGER,            
            
            fa16e1et100E1Ch1LOMF         INTEGER,
            fa16e1et100E1Ch2LOMF         INTEGER,
            fa16e1et100E1Ch3LOMF         INTEGER,
            fa16e1et100E1Ch4LOMF         INTEGER,
            fa16e1et100E1Ch5LOMF         INTEGER,
            fa16e1et100E1Ch6LOMF         INTEGER,
            fa16e1et100E1Ch7LOMF         INTEGER,
            fa16e1et100E1Ch8LOMF         INTEGER,
            fa16e1et100E1Ch9LOMF         INTEGER,
            fa16e1et100E1Ch10LOMF         INTEGER,
            fa16e1et100E1Ch11LOMF         INTEGER,
            fa16e1et100E1Ch12LOMF         INTEGER,
            fa16e1et100E1Ch13LOMF         INTEGER,
            fa16e1et100E1Ch14LOMF         INTEGER,
            fa16e1et100E1Ch15LOMF         INTEGER,
            fa16e1et100E1Ch16LOMF         INTEGER,            
            
            fa16e1et100E1Ch1Active       INTEGER,
            fa16e1et100E1Ch2Active       INTEGER,
            fa16e1et100E1Ch3Active       INTEGER,
            fa16e1et100E1Ch4Active       INTEGER,
            fa16e1et100E1Ch5Active       INTEGER,
            fa16e1et100E1Ch6Active       INTEGER,
            fa16e1et100E1Ch7Active       INTEGER,
            fa16e1et100E1Ch8Active       INTEGER,
            fa16e1et100E1Ch9Active       INTEGER,
            fa16e1et100E1Ch10Active       INTEGER,
            fa16e1et100E1Ch11Active       INTEGER,
            fa16e1et100E1Ch12Active       INTEGER,
            fa16e1et100E1Ch13Active       INTEGER,
            fa16e1et100E1Ch14Active       INTEGER,
            fa16e1et100E1Ch15Active       INTEGER,
            fa16e1et100E1Ch16Active       INTEGER,            
            
            fa16e1et100E1Ch1LoopBack     INTEGER,
            fa16e1et100E1Ch2LoopBack     INTEGER,
            fa16e1et100E1Ch3LoopBack     INTEGER,
            fa16e1et100E1Ch4LoopBack     INTEGER,
            fa16e1et100E1Ch5LoopBack     INTEGER,
            fa16e1et100E1Ch6LoopBack     INTEGER,
            fa16e1et100E1Ch7LoopBack     INTEGER,
            fa16e1et100E1Ch8LoopBack     INTEGER,
            fa16e1et100E1Ch9LoopBack     INTEGER,
            fa16e1et100E1Ch10LoopBack     INTEGER,
            fa16e1et100E1Ch11LoopBack     INTEGER,
            fa16e1et100E1Ch12LoopBack     INTEGER,
            fa16e1et100E1Ch13LoopBack     INTEGER,
            fa16e1et100E1Ch14LoopBack     INTEGER,
            fa16e1et100E1Ch15LoopBack     INTEGER,
            fa16e1et100E1Ch16LoopBack     INTEGER,            
            
            fa16e1et100FxLink            INTEGER,
            fa16e1et100FxLaser           INTEGER,
            fa16e1et100FxActive          INTEGER,
            fa16e1et100FxLaserOutput     INTEGER,
            fa16e1et100FxOpMode          INTEGER,

            fa16e1et100UtpLink           INTEGER,
            fa16e1et100UtpStatus         INTEGER,
            fa16e1et100UtpFlowCtrlSts    INTEGER,
            fa16e1et100UtpMode           INTEGER,
            fa16e1et100UtpFlowCtrl       INTEGER,

            fa16e1et100SpeedLimit        Integer32,
            fa16e1et100VlanAware         INTEGER,
            fa16e1et100VlanID            Integer32,

            fa16e1et100RemoteDevice      INTEGER,
            fa16e1et100RemotePower       INTEGER,

            fa16e1et100TimingSource      INTEGER,
            fa16e1et100FCSofGFP          INTEGER,
            fa16e1et100AutoChAdjust      INTEGER,
            fa16e1et100PayloadScramble   INTEGER,
            fa16e1et100Failover          INTEGER,

            fa16e1et100LOM               INTEGER,
            fa16e1et100SQM               INTEGER,
            fa16e1et100CRC               INTEGER,
            fa16e1et100LOA               INTEGER,
            fa16e1et100LFD               INTEGER,
            fa16e1et100DDTO              INTEGER,

            fa16e1et100VcatMember1       INTEGER,
            fa16e1et100VcatMember2       INTEGER,
            fa16e1et100VcatMember3       INTEGER,
            fa16e1et100VcatMember4       INTEGER,
            fa16e1et100VcatMember5       INTEGER,
            fa16e1et100VcatMember6       INTEGER,
            fa16e1et100VcatMember7       INTEGER,
            fa16e1et100VcatMember8       INTEGER,
            fa16e1et100VcatMember9       INTEGER,
            fa16e1et100VcatMember10       INTEGER,
            fa16e1et100VcatMember11       INTEGER,
            fa16e1et100VcatMember12       INTEGER,
            fa16e1et100VcatMember13       INTEGER,
            fa16e1et100VcatMember14       INTEGER,
            fa16e1et100VcatMember15       INTEGER,
            fa16e1et100VcatMember16       INTEGER,            
            
            fa16e1et100SnmpChannel1      INTEGER,
            fa16e1et100SnmpChannel2      INTEGER,
            fa16e1et100SnmpChannel3      INTEGER,
            fa16e1et100SnmpChannel4      INTEGER,
 --           fa16e1et100SnmpChannel5      INTEGER,

            fa16e1et100ErrSec            Counter32,
            fa16e1et100ErrFreeSec        Counter32,
            fa16e1et100ServErrSec        Counter32,
            fa16e1et100BertFunction      INTEGER,
            fa16e1et100ClrBertData       INTEGER,
            fa16e1et100BertE1Channel     INTEGER,

            fa16e1et100RmonFunction      INTEGER,
            fa16e1et100RmonTx            DisplayString,
            fa16e1et100RmonRx            DisplayString,
            fa16e1et100ClrRmonTx         INTEGER,
            fa16e1et100ClrRmonRx         INTEGER,

            fa16e1et100Sfp               INTEGER,
            fa16e1et100SfpVendor         DisplayString,
            fa16e1et100SfpPartNo         DisplayString,
            fa16e1et100SfpFiberType      INTEGER,
            fa16e1et100SfpTxWaveLen      DisplayString,
            fa16e1et100SfpRxWaveLen      DisplayString,
            fa16e1et100SfpLinkLen        DisplayString,
            fa16e1et100SfpModelID        DisplayString,
            fa16e1et100SfpVersion        DisplayString,
            fa16e1et100SfpModelType      DisplayString,

            fa16e1et100DDInformation     INTEGER,
            fa16e1et100DDTxPower         DisplayString,
            fa16e1et100DDRxPower         DisplayString,
            fa16e1et100DDRxSens          DisplayString,
            fa16e1et100DDTemp            DisplayString,
            fa16e1et100DDBias            DisplayString,
            fa16e1et100DDVoltage         DisplayString,
            
            fa16e1et100ChannelDefect      INTEGER,
            fa16e1et100LoopDetection      INTEGER,
            
            fa16e1et100LoopCh1      INTEGER,
            fa16e1et100LoopCh2      INTEGER,
            fa16e1et100LoopCh3      INTEGER,
            fa16e1et100LoopCh4      INTEGER,
            fa16e1et100LoopCh5      INTEGER,
            fa16e1et100LoopCh6      INTEGER,
            fa16e1et100LoopCh7      INTEGER,
            fa16e1et100LoopCh8      INTEGER,
            fa16e1et100LoopCh9      INTEGER,
            fa16e1et100LoopCh10      INTEGER,
            fa16e1et100LoopCh11      INTEGER,
            fa16e1et100LoopCh12      INTEGER,
            fa16e1et100LoopCh13      INTEGER,
            fa16e1et100LoopCh14      INTEGER,
            fa16e1et100LoopCh15      INTEGER,
            fa16e1et100LoopCh16      INTEGER,

            fa16e1et100DefectCh1      INTEGER,
            fa16e1et100DefectCh2      INTEGER,
            fa16e1et100DefectCh3      INTEGER,
            fa16e1et100DefectCh4      INTEGER,
            fa16e1et100DefectCh5      INTEGER,
            fa16e1et100DefectCh6      INTEGER,
            fa16e1et100DefectCh7      INTEGER,            
            fa16e1et100DefectCh8      INTEGER,                       
            fa16e1et100DefectCh9      INTEGER,
            fa16e1et100DefectCh10      INTEGER,
            fa16e1et100DefectCh11      INTEGER,
            fa16e1et100DefectCh12      INTEGER,
            fa16e1et100DefectCh13      INTEGER,
            fa16e1et100DefectCh14      INTEGER,
            fa16e1et100DefectCh15      INTEGER,            
            fa16e1et100DefectCh16      INTEGER,             
            fa16e1et100FxSignal        INTEGER,
            fa16e1et100VlanMode		 INTEGER
    }

        fa16e1et100ChassisIndex OBJECT-TYPE
            SYNTAX  Integer32 (0..9)
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "A unique value for each card.
                It starts from 0 to 9 contiguously."
            ::= { fa16e1et100Entry 1 }

        fa16e1et100SlotIndex OBJECT-TYPE
            SYNTAX  Integer32 (1..20)
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "A unique value for each card.
                It starts from 1 to 20 contiguously."
            ::= { fa16e1et100Entry 2 }

        fa16e1et100SideIndex OBJECT-TYPE
            SYNTAX  INTEGER {
                local(1),
                remoteA(2),
                remoteB(3),
                remoteC(4),
                remoteD(5)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "A unique value for each card. It is the card location:
                1:Local area
                2:Remote A or Remote area
                3:Remote B area
                4:Remote C area
                5:Remote D area"
            ::= { fa16e1et100Entry 3 }

        fa16e1et100CardHWVer OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card hardware version x.xxx"
            ::= { fa16e1et100Entry 4 }

        fa16e1et100CardFWVer OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card firmware version x.xxx"
            ::= { fa16e1et100Entry 5 }

        fa16e1et100CardCPLDVer OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card CPLD version x.xxx"
            ::= { fa16e1et100Entry 6 }

        fa16e1et100CardFPGAVer OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card FPGA version x.xxx"
            ::= { fa16e1et100Entry 7 }

        fa16e1et100Model  OBJECT-TYPE
            SYNTAX  INTEGER {
                fa16E1Et100T(6800),
                fa16E1Et100S(6900)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "Card Type:
                6400:16E1-ET100T
                6500:16E1-ET100S"
            ::= { fa16e1et100Entry 8 }

        fa16e1et100SystemStatus  OBJECT-TYPE
            SYNTAX  INTEGER {
                normal(1),
                alarm(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card system status:
                1:Normal
                2:Alarm"
	        ::= { fa16e1et100Entry 9 }

        fa16e1et100DeviceActive  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card active:
                1:Disable 
                2:Enable"
            ::= { fa16e1et100Entry 10 }

--        fa16e1et100DeviceReset  OBJECT-TYPE
--            SYNTAX  INTEGER {
--                off(1),
--                trigger(2)
--            }
--            MAX-ACCESS  read-write
--            STATUS  current
--            DESCRIPTION
--                "16E1-ET100(T/S) Series card device reset:
--                1:Off
--                2:Trigger"
--            ::= { fa16e1et100Entry 11 }

        fa16e1et100SetToDefault  OBJECT-TYPE
            SYNTAX  INTEGER {
                off(1),
                act(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card port set to default:
                1:Off
                2:Trigger"
            ::= { fa16e1et100Entry 12 }

        fa16e1et100E1Ch1Singal  OBJECT-TYPE
            SYNTAX  INTEGER {
                singalLoss(1),
                normal(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 1 signal status:
                1:Singal Loss
                2:Normal"
            ::= { fa16e1et100Entry 13 }

        fa16e1et100E1Ch2Singal  OBJECT-TYPE
            SYNTAX  INTEGER {
                singalLoss(1),
                normal(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 2 signal status:
                1:Singal Loss
                2:Normal"
            ::= { fa16e1et100Entry 14 }

        fa16e1et100E1Ch3Singal  OBJECT-TYPE
            SYNTAX  INTEGER {
                singalLoss(1),
                normal(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 3 signal status:
                1:Singal Loss
                2:Normal"
            ::= { fa16e1et100Entry 15 }

        fa16e1et100E1Ch4Singal  OBJECT-TYPE
            SYNTAX  INTEGER {
                singalLoss(1),
                normal(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 4 signal status:
                1:Singal Loss
                2:Normal"
            ::= { fa16e1et100Entry 16 }

        fa16e1et100E1Ch5Singal  OBJECT-TYPE
            SYNTAX  INTEGER {
                singalLoss(1),
                normal(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 5 signal status:
                1:Singal Loss
                2:Normal"
            ::= { fa16e1et100Entry 17 }

        fa16e1et100E1Ch6Singal  OBJECT-TYPE
            SYNTAX  INTEGER {
                singalLoss(1),
                normal(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 6 signal status:
                1:Singal Loss
                2:Normal"
            ::= { fa16e1et100Entry 18 }
            
        fa16e1et100E1Ch7Singal  OBJECT-TYPE
            SYNTAX  INTEGER {
                singalLoss(1),
                normal(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 7 signal status:
                1:Singal Loss
                2:Normal"
            ::= { fa16e1et100Entry 19 }
            
        fa16e1et100E1Ch8Singal  OBJECT-TYPE
            SYNTAX  INTEGER {
                singalLoss(1),
                normal(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 8 signal status:
                1:Singal Loss
                2:Normal"
            ::= { fa16e1et100Entry 20 }
            
        fa16e1et100E1Ch9Singal  OBJECT-TYPE
            SYNTAX  INTEGER {
                singalLoss(1),
                normal(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 9 signal status:
                1:Singal Loss
                2:Normal"
            ::= { fa16e1et100Entry 21 }
            
        fa16e1et100E1Ch10Singal  OBJECT-TYPE
            SYNTAX  INTEGER {
                singalLoss(1),
                normal(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 10 signal status:
                1:Singal Loss
                2:Normal"
            ::= { fa16e1et100Entry 22 }
                                    
        fa16e1et100E1Ch11Singal  OBJECT-TYPE
            SYNTAX  INTEGER {
                singalLoss(1),
                normal(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 11 signal status:
                1:Singal Loss
                2:Normal"
            ::= { fa16e1et100Entry 23 }
            
        fa16e1et100E1Ch12Singal  OBJECT-TYPE
            SYNTAX  INTEGER {
                singalLoss(1),
                normal(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 12 signal status:
                1:Singal Loss
                2:Normal"
            ::= { fa16e1et100Entry 24 }            

        fa16e1et100E1Ch13Singal  OBJECT-TYPE
            SYNTAX  INTEGER {
                singalLoss(1),
                normal(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 13 signal status:
                1:Singal Loss
                2:Normal"
            ::= { fa16e1et100Entry 25 }

        fa16e1et100E1Ch14Singal  OBJECT-TYPE
            SYNTAX  INTEGER {
                singalLoss(1),
                normal(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 14 signal status:
                1:Singal Loss
                2:Normal"
            ::= { fa16e1et100Entry 26 }

        fa16e1et100E1Ch15Singal  OBJECT-TYPE
            SYNTAX  INTEGER {
                singalLoss(1),
                normal(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 15 signal status:
                1:Singal Loss
                2:Normal"
            ::= { fa16e1et100Entry 27 }

        fa16e1et100E1Ch16Singal  OBJECT-TYPE
            SYNTAX  INTEGER {
                singalLoss(1),
                normal(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 16 signal status:
                1:Singal Loss
                2:Normal"
            ::= { fa16e1et100Entry 28 }
                                    
        fa16e1et100E1Ch1Sync  OBJECT-TYPE
            SYNTAX  INTEGER {
                syncLoss(1),
                sync(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 1 sync status:
                1:Sync Loss
                2:Sync"
            ::= { fa16e1et100Entry 29 }

        fa16e1et100E1Ch2Sync  OBJECT-TYPE
            SYNTAX  INTEGER {
                syncLoss(1),
                sync(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 2 sync status:
                1:Sync Loss
                2:Sync"
            ::= { fa16e1et100Entry 30 }

        fa16e1et100E1Ch3Sync  OBJECT-TYPE
            SYNTAX  INTEGER {
                syncLoss(1),
                sync(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 3 sync status:
                1:Sync Loss
                2:Sync"
            ::= { fa16e1et100Entry 31 }

        fa16e1et100E1Ch4Sync  OBJECT-TYPE
            SYNTAX  INTEGER {
                syncLoss(1),
                sync(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 4 sync status:
                1:Sync Loss
                2:Sync"
            ::= { fa16e1et100Entry 32 }

        fa16e1et100E1Ch5Sync  OBJECT-TYPE
            SYNTAX  INTEGER {
                syncLoss(1),
                sync(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 5 sync status:
                1:Sync Loss
                2:Sync"
            ::= { fa16e1et100Entry 33 }

        fa16e1et100E1Ch6Sync  OBJECT-TYPE
            SYNTAX  INTEGER {
                syncLoss(1),
                sync(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 3 sync status:
                1:Sync Loss
                2:Sync"
            ::= { fa16e1et100Entry 34 }

        fa16e1et100E1Ch7Sync  OBJECT-TYPE
            SYNTAX  INTEGER {
                syncLoss(1),
                sync(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 4 sync status:
                1:Sync Loss
                2:Sync"
            ::= { fa16e1et100Entry 35 }

        fa16e1et100E1Ch8Sync  OBJECT-TYPE
            SYNTAX  INTEGER {
                syncLoss(1),
                sync(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 5 sync status:
                1:Sync Loss
                2:Sync"
            ::= { fa16e1et100Entry 36 }

        fa16e1et100E1Ch9Sync  OBJECT-TYPE
            SYNTAX  INTEGER {
                syncLoss(1),
                sync(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 9 sync status:
                1:Sync Loss
                2:Sync"
            ::= { fa16e1et100Entry 37 }
            
        fa16e1et100E1Ch10Sync  OBJECT-TYPE
            SYNTAX  INTEGER {
                syncLoss(1),
                sync(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 10 sync status:
                1:Sync Loss
                2:Sync"
            ::= { fa16e1et100Entry 38 }
            
        fa16e1et100E1Ch11Sync  OBJECT-TYPE
            SYNTAX  INTEGER {
                syncLoss(1),
                sync(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 11 sync status:
                1:Sync Loss
                2:Sync"
            ::= { fa16e1et100Entry 39 }
            
        fa16e1et100E1Ch12Sync  OBJECT-TYPE
            SYNTAX  INTEGER {
                syncLoss(1),
                sync(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 12 sync status:
                1:Sync Loss
                2:Sync"
            ::= { fa16e1et100Entry 40 }

        fa16e1et100E1Ch13Sync  OBJECT-TYPE
            SYNTAX  INTEGER {
                syncLoss(1),
                sync(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 13 sync status:
                1:Sync Loss
                2:Sync"
            ::= { fa16e1et100Entry 41 }
            
        fa16e1et100E1Ch14Sync  OBJECT-TYPE
            SYNTAX  INTEGER {
                syncLoss(1),
                sync(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 14 sync status:
                1:Sync Loss
                2:Sync"
            ::= { fa16e1et100Entry 42 }
            
        fa16e1et100E1Ch15Sync  OBJECT-TYPE
            SYNTAX  INTEGER {
                syncLoss(1),
                sync(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 15 sync status:
                1:Sync Loss
                2:Sync"
            ::= { fa16e1et100Entry 43 }
            
        fa16e1et100E1Ch16Sync  OBJECT-TYPE
            SYNTAX  INTEGER {
                syncLoss(1),
                sync(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 16 sync status:
                1:Sync Loss
                2:Sync"
            ::= { fa16e1et100Entry 44 }    


        fa16e1et100E1Ch1RecvAIS  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 1 receive AIS status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 45 }

        fa16e1et100E1Ch2RecvAIS  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 2 receive AIS status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 46 }

        fa16e1et100E1Ch3RecvAIS  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 3 receive AIS status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 47 }

        fa16e1et100E1Ch4RecvAIS  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 4 receive AIS status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 48 }

        fa16e1et100E1Ch5RecvAIS  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 5 receive AIS status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 49 }

        fa16e1et100E1Ch6RecvAIS  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 6 receive AIS status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 50 }
            
        fa16e1et100E1Ch7RecvAIS  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 7 receive AIS status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 51 }
            
        fa16e1et100E1Ch8RecvAIS  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 8 receive AIS status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 52 }                        

        fa16e1et100E1Ch9RecvAIS  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 9 receive AIS status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 53 }    
            
        fa16e1et100E1Ch10RecvAIS  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 10 receive AIS status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 54 }  
            
        fa16e1et100E1Ch11RecvAIS  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 11 receive AIS status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 55 }  
            
        fa16e1et100E1Ch12RecvAIS  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 12 receive AIS status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 56 }  
            
        fa16e1et100E1Ch13RecvAIS  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 13 receive AIS status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 57 }  
            
        fa16e1et100E1Ch14RecvAIS  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 14 receive AIS status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 58 }  
            
        fa16e1et100E1Ch15RecvAIS  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 15 receive AIS status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 59 }  
            
        fa16e1et100E1Ch16RecvAIS  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 16 receive AIS status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 60 }  

        fa16e1et100E1Ch1ConnType  OBJECT-TYPE
            SYNTAX  INTEGER {
                rj48c(1),
                bnc(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 1 connector type:
                1:RJ-48C
                2:BNC"
            ::= { fa16e1et100Entry 61 }

        fa16e1et100E1Ch2ConnType  OBJECT-TYPE
            SYNTAX  INTEGER {
                rj48c(1),
                bnc(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 2 connector type:
                1:RJ-48C
                2:BNC"
            ::= { fa16e1et100Entry 62 }

        fa16e1et100E1Ch3ConnType  OBJECT-TYPE
            SYNTAX  INTEGER {
                rj48c(1),
                bnc(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 3 connector type:
                1:RJ-48C
                2:BNC"
            ::= { fa16e1et100Entry 63 }

        fa16e1et100E1Ch4ConnType  OBJECT-TYPE
            SYNTAX  INTEGER {
                rj48c(1),
                bnc(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 4 connector type:
                1:RJ-48C
                2:BNC"
            ::= { fa16e1et100Entry 64 }

        fa16e1et100E1Ch5ConnType  OBJECT-TYPE
            SYNTAX  INTEGER {
                rj48c(1),
                bnc(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 5 connector type:
                1:RJ-48C
                2:BNC"
            ::= { fa16e1et100Entry 65 }

        fa16e1et100E1Ch6ConnType  OBJECT-TYPE
            SYNTAX  INTEGER {
                rj48c(1),
                bnc(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 6 connector type:
                1:RJ-48C
                2:BNC"
            ::= { fa16e1et100Entry 66 }
            
        fa16e1et100E1Ch7ConnType  OBJECT-TYPE
            SYNTAX  INTEGER {
                rj48c(1),
                bnc(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 7 connector type:
                1:RJ-48C
                2:BNC"
            ::= { fa16e1et100Entry 67 }
            
        fa16e1et100E1Ch8ConnType  OBJECT-TYPE
            SYNTAX  INTEGER {
                rj48c(1),
                bnc(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 8 connector type:
                1:RJ-48C
                2:BNC"
            ::= { fa16e1et100Entry 68 }                        

        fa16e1et100E1Ch9ConnType  OBJECT-TYPE
            SYNTAX  INTEGER {
                rj48c(1),
                bnc(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 9 connector type:
                1:RJ-48C
                2:BNC"
            ::= { fa16e1et100Entry 69 }   
            
        fa16e1et100E1Ch10ConnType  OBJECT-TYPE
            SYNTAX  INTEGER {
                rj48c(1),
                bnc(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 10 connector type:
                1:RJ-48C
                2:BNC"
            ::= { fa16e1et100Entry 70 }   
            
        fa16e1et100E1Ch11ConnType  OBJECT-TYPE
            SYNTAX  INTEGER {
                rj48c(1),
                bnc(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 11 connector type:
                1:RJ-48C
                2:BNC"
            ::= { fa16e1et100Entry 71 }   
            
        fa16e1et100E1Ch12ConnType  OBJECT-TYPE
            SYNTAX  INTEGER {
                rj48c(1),
                bnc(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 12 connector type:
                1:RJ-48C
                2:BNC"
            ::= { fa16e1et100Entry 72 }   
            
        fa16e1et100E1Ch13ConnType  OBJECT-TYPE
            SYNTAX  INTEGER {
                rj48c(1),
                bnc(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 13 connector type:
                1:RJ-48C
                2:BNC"
            ::= { fa16e1et100Entry 73 }   
            
        fa16e1et100E1Ch14ConnType  OBJECT-TYPE
            SYNTAX  INTEGER {
                rj48c(1),
                bnc(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 14 connector type:
                1:RJ-48C
                2:BNC"
            ::= { fa16e1et100Entry 74 }   
            
        fa16e1et100E1Ch15ConnType  OBJECT-TYPE
            SYNTAX  INTEGER {
                rj48c(1),
                bnc(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 15 connector type:
                1:RJ-48C
                2:BNC"
            ::= { fa16e1et100Entry 75 }   
            
        fa16e1et100E1Ch16ConnType  OBJECT-TYPE
            SYNTAX  INTEGER {
                rj48c(1),
                bnc(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 16 connector type:
                1:RJ-48C
                2:BNC"
            ::= { fa16e1et100Entry 76 }  

        fa16e1et100E1Ch1RAI  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 1 RAI status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 77 }

        fa16e1et100E1Ch2RAI  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 2 RAI status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 78 }

        fa16e1et100E1Ch3RAI  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 3 RAI status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 79 }

        fa16e1et100E1Ch4RAI  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 4 RAI status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 80 }

        fa16e1et100E1Ch5RAI  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 5 RAI status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 81 }
            
        fa16e1et100E1Ch6RAI  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 6 RAI status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 82 }
            
        fa16e1et100E1Ch7RAI  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 7 RAI status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 83 }
            
        fa16e1et100E1Ch8RAI  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 8 RAI status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 84 }                                    

        fa16e1et100E1Ch9RAI  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 9 RAI status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 85 }
            
        fa16e1et100E1Ch10RAI  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 10 RAI status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 86 }
            
        fa16e1et100E1Ch11RAI  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 11 RAI status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 87 }
            
        fa16e1et100E1Ch12RAI  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 12 RAI status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 88 }
            
        fa16e1et100E1Ch13RAI  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 13 RAI status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 89 }
            
        fa16e1et100E1Ch14RAI  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 14 RAI status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 90 }
            
        fa16e1et100E1Ch15RAI  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 15 RAI status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 91 }
            
        fa16e1et100E1Ch16RAI  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 16 RAI status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 92 } 

        fa16e1et100E1Ch1LOMF  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 1 LOMF status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 93 }

        fa16e1et100E1Ch2LOMF  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 2 LOMF status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 94 }

        fa16e1et100E1Ch3LOMF  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 3 LOMF status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 95 }

        fa16e1et100E1Ch4LOMF  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 4 LOMF status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 96 }

        fa16e1et100E1Ch5LOMF  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 5 LOMF status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 97 }
            
        fa16e1et100E1Ch6LOMF  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 6 LOMF status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 98 }
            
        fa16e1et100E1Ch7LOMF  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 7 LOMF status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 99 }
            
        fa16e1et100E1Ch8LOMF  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 8 LOMF status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 100 }   
            
        fa16e1et100E1Ch9LOMF  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 9 LOMF status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 101 } 
            
        fa16e1et100E1Ch10LOMF  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 10 LOMF status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 102 } 
            
        fa16e1et100E1Ch11LOMF  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 11 LOMF status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 103 } 
            
        fa16e1et100E1Ch12LOMF  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 12 LOMF status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 104 } 
            
        fa16e1et100E1Ch13LOMF  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 13 LOMF status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 105 } 
            
        fa16e1et100E1Ch14LOMF  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 14 LOMF status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 106 } 
            
        fa16e1et100E1Ch15LOMF  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 15 LOMF status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 107 } 
            
        fa16e1et100E1Ch16LOMF  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 16 LOMF status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 108 }                                              

        fa16e1et100E1Ch1Active  OBJECT-TYPE
            SYNTAX  INTEGER {
                inactive(1),
                active(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 1 active status:
                1:Inactive
                2:Active"
            ::= { fa16e1et100Entry 109 }

        fa16e1et100E1Ch2Active  OBJECT-TYPE
            SYNTAX  INTEGER {
                inactive(1),
                active(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 2 active status:
                1:Inactive
                2:Active"
            ::= { fa16e1et100Entry 110 }

        fa16e1et100E1Ch3Active  OBJECT-TYPE
            SYNTAX  INTEGER {
                inactive(1),
                active(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 3 active status:
                1:Inactive
                2:Active"
            ::= { fa16e1et100Entry 111 }

        fa16e1et100E1Ch4Active  OBJECT-TYPE
            SYNTAX  INTEGER {
                inactive(1),
                active(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 4 active status:
                1:Inactive
                2:Active"
            ::= { fa16e1et100Entry 112 }

        fa16e1et100E1Ch5Active  OBJECT-TYPE
            SYNTAX  INTEGER {
                inactive(1),
                active(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 5 active status:
                1:Inactive
                2:Active"
            ::= { fa16e1et100Entry 113 }
            
        fa16e1et100E1Ch6Active  OBJECT-TYPE
            SYNTAX  INTEGER {
                inactive(1),
                active(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 6 active status:
                1:Inactive
                2:Active"
            ::= { fa16e1et100Entry 114 }
            
        fa16e1et100E1Ch7Active  OBJECT-TYPE
            SYNTAX  INTEGER {
                inactive(1),
                active(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 7 active status:
                1:Inactive
                2:Active"
            ::= { fa16e1et100Entry 115 }
            
        fa16e1et100E1Ch8Active  OBJECT-TYPE
            SYNTAX  INTEGER {
                inactive(1),
                active(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 8 active status:
                1:Inactive
                2:Active"
            ::= { fa16e1et100Entry 116 }                                    

        fa16e1et100E1Ch9Active  OBJECT-TYPE
            SYNTAX  INTEGER {
                inactive(1),
                active(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 9 active status:
                1:Inactive
                2:Active"
            ::= { fa16e1et100Entry 117 } 
            
        fa16e1et100E1Ch10Active  OBJECT-TYPE
            SYNTAX  INTEGER {
                inactive(1),
                active(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 10 active status:
                1:Inactive
                2:Active"
            ::= { fa16e1et100Entry 118 } 
            
        fa16e1et100E1Ch11Active  OBJECT-TYPE
            SYNTAX  INTEGER {
                inactive(1),
                active(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 11 active status:
                1:Inactive
                2:Active"
            ::= { fa16e1et100Entry 119 } 
            
        fa16e1et100E1Ch12Active  OBJECT-TYPE
            SYNTAX  INTEGER {
                inactive(1),
                active(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 12 active status:
                1:Inactive
                2:Active"
            ::= { fa16e1et100Entry 120 } 
            
        fa16e1et100E1Ch13Active  OBJECT-TYPE
            SYNTAX  INTEGER {
                inactive(1),
                active(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 13 active status:
                1:Inactive
                2:Active"
            ::= { fa16e1et100Entry 121 } 
            
        fa16e1et100E1Ch14Active  OBJECT-TYPE
            SYNTAX  INTEGER {
                inactive(1),
                active(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 14 active status:
                1:Inactive
                2:Active"
            ::= { fa16e1et100Entry 122 } 
            
        fa16e1et100E1Ch15Active  OBJECT-TYPE
            SYNTAX  INTEGER {
                inactive(1),
                active(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 15 active status:
                1:Inactive
                2:Active"
            ::= { fa16e1et100Entry 123 } 
            
        fa16e1et100E1Ch16Active  OBJECT-TYPE
            SYNTAX  INTEGER {
                inactive(1),
                active(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 16 active status:
                1:Inactive
                2:Active"
            ::= { fa16e1et100Entry 124 }

        fa16e1et100E1Ch1LoopBack  OBJECT-TYPE
            SYNTAX  INTEGER {
                off(1),
                rlb(3)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card port E1 channel 1 loop back:
                1:Off
                3:RLB (Max used 4 channels)"
            ::= { fa16e1et100Entry 125 }

        fa16e1et100E1Ch2LoopBack  OBJECT-TYPE
            SYNTAX  INTEGER {
                off(1),
                rlb(3)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card port E1 channel 2 loop back:
                1:Off
                3:RLB (Max used 4 channels)"
            ::= { fa16e1et100Entry 126 }

        fa16e1et100E1Ch3LoopBack  OBJECT-TYPE
            SYNTAX  INTEGER {
                off(1),
                rlb(3)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card port E1 channel 3 loop back:
                1:Off
                3:RLB (Max used 4 channels)"
            ::= { fa16e1et100Entry 127 }

        fa16e1et100E1Ch4LoopBack  OBJECT-TYPE
            SYNTAX  INTEGER {
                off(1),
                rlb(3)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card port E1 channel 4 loop back:
                1:Off
                3:RLB (Max used 4 channels)"
            ::= { fa16e1et100Entry 128 }

        fa16e1et100E1Ch5LoopBack  OBJECT-TYPE
            SYNTAX  INTEGER {
                off(1),
                rlb(3)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card port E1 channel 5 loop back:
                1:Off
                3:RLB (Max used 4 channels)"
            ::= { fa16e1et100Entry 129 }
            
        fa16e1et100E1Ch6LoopBack  OBJECT-TYPE
            SYNTAX  INTEGER {
                off(1),
                rlb(3)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card port E1 channel 6 loop back:
                1:Off
                3:RLB (Max used 4 channels)"
            ::= { fa16e1et100Entry 130 }
            
        fa16e1et100E1Ch7LoopBack  OBJECT-TYPE
            SYNTAX  INTEGER {
                off(1),
                rlb(3)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card port E1 channel 7 loop back:
                1:Off
                3:RLB (Max used 4 channels)"
            ::= { fa16e1et100Entry 131 }
            
        fa16e1et100E1Ch8LoopBack  OBJECT-TYPE
            SYNTAX  INTEGER {
                off(1),
                rlb(3)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card port E1 channel 8 loop back:
                1:Off
                3:RLB (Max used 4 channels)"
            ::= { fa16e1et100Entry 132 }                                    

        fa16e1et100E1Ch9LoopBack  OBJECT-TYPE
            SYNTAX  INTEGER {
                off(1),
                rlb(3)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card port E1 channel 9 loop back:
                1:Off
                3:RLB (Max used 4 channels)"
            ::= { fa16e1et100Entry 133 } 
            
        fa16e1et100E1Ch10LoopBack  OBJECT-TYPE
            SYNTAX  INTEGER {
                off(1),
                rlb(3)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card port E1 channel 10 loop back:
                1:Off
                3:RLB (Max used 4 channels)"
            ::= { fa16e1et100Entry 134 } 
            
        fa16e1et100E1Ch11LoopBack  OBJECT-TYPE
            SYNTAX  INTEGER {
                off(1),
                rlb(3)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card port E1 channel 11 loop back:
                1:Off
                3:RLB (Max used 4 channels)"
            ::= { fa16e1et100Entry 135 } 
            
        fa16e1et100E1Ch12LoopBack  OBJECT-TYPE
            SYNTAX  INTEGER {
                off(1),
                rlb(3)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card port E1 channel 12 loop back:
                1:Off
                3:RLB (Max used 4 channels)"
            ::= { fa16e1et100Entry 136 } 
            
        fa16e1et100E1Ch13LoopBack  OBJECT-TYPE
            SYNTAX  INTEGER {
                off(1),
                rlb(3)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card port E1 channel 13 loop back:
                1:Off
                3:RLB (Max used 4 channels)"
            ::= { fa16e1et100Entry 137 } 
            
        fa16e1et100E1Ch14LoopBack  OBJECT-TYPE
            SYNTAX  INTEGER {
                off(1),
                rlb(3)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card port E1 channel 14 loop back:
                1:Off
                3:RLB (Max used 4 channels)"
            ::= { fa16e1et100Entry 138 } 
            
        fa16e1et100E1Ch15LoopBack  OBJECT-TYPE
            SYNTAX  INTEGER {
                off(1),
                rlb(3)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card port E1 channel 15 loop back:
                1:Off
                3:RLB (Max used 4 channels)"
            ::= { fa16e1et100Entry 139 } 
            
        fa16e1et100E1Ch16LoopBack  OBJECT-TYPE
            SYNTAX  INTEGER {
                off(1),
                rlb(3)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card port E1 channel 16 loop back:
                1:Off
                3:RLB (Max used 4 channels)"
            ::= { fa16e1et100Entry 140 }

        fa16e1et100FxLink  OBJECT-TYPE
            SYNTAX  INTEGER {
                linkDown(1),
                linkUp(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100S Series card Fiber siganl detect status:
                1:Link down or Fiber unplugged
                2:Link up or Singal detected"
            ::= { fa16e1et100Entry 141 }

        fa16e1et100FxLaser  OBJECT-TYPE
            SYNTAX  INTEGER {
                normal(1),
                error(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100S Series card laser status:
                1:Normal
                2:Error"
            ::= { fa16e1et100Entry 142 }

        fa16e1et100FxActive  OBJECT-TYPE
            SYNTAX  INTEGER {
                inactive(1),
                avtive(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100S Series card Fiber active:
                1:Inactive
                2:Active"
            ::= { fa16e1et100Entry 143 }

        fa16e1et100FxLaserOutput  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100S Series card laser output:
                1:disable
                2:Enable"
            ::= { fa16e1et100Entry 144 }

        fa16e1et100FxOpMode  OBJECT-TYPE
            SYNTAX  INTEGER {
                switch(1),
                convert(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100S Series card operation mode:
                1:Switch
                2:Convert"
            ::= { fa16e1et100Entry 145 }

        fa16e1et100UtpLink  OBJECT-TYPE
            SYNTAX  INTEGER {
                linkDown(1),
                linkUp(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100T Series card UTP link status:
                1:Link Down
                2:Link Up"
            ::= { fa16e1et100Entry 146 }

        fa16e1et100UtpStatus  OBJECT-TYPE
            SYNTAX  INTEGER {
                none(1),
                link10MbpsHDX(2),
                link10MbpsFDX(3),
                link100MbpsHDX(4),
                link100MbpsFDX(5)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100T Series card UTP link mode status:
                1:None, Maybe link down
                2:Link at 10Mbps, Half duplex
                3:Link at 10Mbps, Full duplex
                4:Link at 100Mbps, Half duplex
                5:Link at 100Mbps, Full duplex"
            ::= { fa16e1et100Entry 147 }

        fa16e1et100UtpFlowCtrlSts  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100T Series card UTP flow control status:
                1:Disable
                2:Enable"
            ::= { fa16e1et100Entry 148 }

        fa16e1et100UtpMode  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                autoNegotiation(2),
                force10MbpsHDX(3),
                force10MbpsFDX(4),
                force100MbpsHDX(5),
                force100MbpsFDX(6)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100T) Series card UTP mode:
                1:Disable
                2:Enable and autoNegotiation
                3:Enable and force to 10Mbps, Half duplex
                4:Enable and force to 10Mbps, Full duplex
                5:Enable and force to 100Mbps, Half duplex
                6:Enable and force to 100Mbps, Full duplex"
            ::= { fa16e1et100Entry 149 }

        fa16e1et100UtpFlowCtrl  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100T Series card UTP flow control:
                1:Disable
                2:Enable"
            ::= { fa16e1et100Entry 150 }

        fa16e1et100SpeedLimit  OBJECT-TYPE
            SYNTAX  Integer32 (0..3125)
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card speed limit:
                Limited = this value * 32Kbps,
                this value is restricted to 0 ~ 3125, 0 to disable"
            ::= { fa16e1et100Entry 151 }

        fa16e1et100VlanAware  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card 802.1q VLAN tag aware:
                1:Disable
                2:Enable"
            ::= { fa16e1et100Entry 152 }

        fa16e1et100VlanID  OBJECT-TYPE
            SYNTAX  Integer32 (1..4094)
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card VLAN ID:
                The ID is restricted to 1 ~ 4094"
            ::= { fa16e1et100Entry 153 }

        fa16e1et100RemoteDevice  OBJECT-TYPE
            SYNTAX  INTEGER {
                linkDown(1),
                linkUp(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "FRM220A-16E1 Series card remote device status:
                1:Link Down
                2:Link Up"
            ::= { fa16e1et100Entry 154 }

        fa16e1et100RemotePower  OBJECT-TYPE
            SYNTAX  INTEGER {
                normal(1),
                off(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card remote device power status:
                1:Normal
                2:Power off"
            ::= { fa16e1et100Entry 155 }

        fa16e1et100TimingSource  OBJECT-TYPE
            SYNTAX  INTEGER {
                recoveryFromE1Channel1(1),
                recoveryFromE1Channel2(2),
                recoveryFromE1Channel3(3),
                recoveryFromE1Channel4(4),
                recoveryFromE1Channel5(5),
                recoveryFromE1Channel6(6),
                recoveryFromE1Channel7(7),
                recoveryFromE1Channel8(8),
                recoveryFromE1Channel9(9),
                recoveryFromE1Channel10(10),
                recoveryFromE1Channel11(11),
                recoveryFromE1Channel12(12),
                recoveryFromE1Channel13(13),
                recoveryFromE1Channel14(14),
                recoveryFromE1Channel15(15),
                recoveryFromE1Channel16(16),
                internalOscillator(17)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card clock:
                1:Recovery from E1 channel 1
                2:Recovery from E1 channel 2
                3:Recovery from E1 channel 3
                4:Recovery from E1 channel 4
                5:Recovery from E1 channel 5
                6:Recovery from E1 channel 6
                7:Recovery from E1 channel 7
                8:Recovery from E1 channel 8
                9:Recovery from E1 channel 9
                10:Recovery from E1 channel 10
                11:Recovery from E1 channel 11
                12:Recovery from E1 channel 12
                13:Recovery from E1 channel 13
                14:Recovery from E1 channel 14
                15:Recovery from E1 channel 15
                16:Recovery from E1 channel 16
                17:Internal oscillatro"
            ::= { fa16e1et100Entry 156 }

        fa16e1et100FCSofGFP  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card FCS of GFP:
                1:Disable
                2:Enable"
            ::= { fa16e1et100Entry 157 }

        fa16e1et100AutoChAdjust  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card auto channel Bdjust:
                1:Disable
                2:Enable"
            ::= { fa16e1et100Entry 158 }

        fa16e1et100PayloadScramble  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card payload scramble:
                1:Disable
                2:Enable"
            ::= { fa16e1et100Entry 159 }

      fa16e1et100Failover  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card failover:
                1:Disable
                2:Enable"
            ::= { fa16e1et100Entry 160 }

        fa16e1et100LOM  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card LOM status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 161 }

        fa16e1et100SQM  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card SQM status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 162 }

        fa16e1et100CRC  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card CRC status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 163 }

        fa16e1et100LOA  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card LOA status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 164 }

        fa16e1et100LFD  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card LFD status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 165 }

        fa16e1et100DDTO  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card DDTO status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 166 }

        fa16e1et100VcatMember1  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card VACT member 1:
                1:Disable
                2:Enable"
            ::= { fa16e1et100Entry 167 }

        fa16e1et100VcatMember2  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card VACT member 2:
                1:Disable
                2:Enable"
            ::= { fa16e1et100Entry 168 }

        fa16e1et100VcatMember3  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card VACT member 3:
                1:Disable
                2:Enable"
            ::= { fa16e1et100Entry 169 }

        fa16e1et100VcatMember4  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card VACT member 4:
                1:Disable
                2:Enable"
            ::= { fa16e1et100Entry 170 }

        fa16e1et100VcatMember5  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card VACT member 5:
                1:Disable
                2:Enable"
            ::= { fa16e1et100Entry 171 }

        fa16e1et100VcatMember6  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card VACT member 6:
                1:Disable
                2:Enable"
            ::= { fa16e1et100Entry 172 }
            
        fa16e1et100VcatMember7  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card VACT member 7:
                1:Disable
                2:Enable"
            ::= { fa16e1et100Entry 173 }
            
        fa16e1et100VcatMember8  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card VACT member 8:
                1:Disable
                2:Enable"
            ::= { fa16e1et100Entry 174 }                        

        fa16e1et100VcatMember9  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card VACT member 9:
                1:Disable
                2:Enable"
            ::= { fa16e1et100Entry 175 }
            
        fa16e1et100VcatMember10  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card VACT member 10:
                1:Disable
                2:Enable"
            ::= { fa16e1et100Entry 176 }
            
        fa16e1et100VcatMember11  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card VACT member 11:
                1:Disable
                2:Enable"
            ::= { fa16e1et100Entry 177 }
            
        fa16e1et100VcatMember12  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card VACT member 12:
                1:Disable
                2:Enable"
            ::= { fa16e1et100Entry 178 }
            
        fa16e1et100VcatMember13  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card VACT member 13:
                1:Disable
                2:Enable"
            ::= { fa16e1et100Entry 179 }
            
        fa16e1et100VcatMember14  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card VACT member 14:
                1:Disable
                2:Enable"
            ::= { fa16e1et100Entry 180 }
            
        fa16e1et100VcatMember15  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card VACT member 15:
                1:Disable
                2:Enable"
            ::= { fa16e1et100Entry 181 }
            
        fa16e1et100VcatMember16  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card VACT member 16:
                1:Disable
                2:Enable"
            ::= { fa16e1et100Entry 182 } 

        fa16e1et100SnmpChannel1  OBJECT-TYPE
            SYNTAX  INTEGER {
                noUse(1),
                use(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card SNMP channel 1:
                1:No use
                2:Use"
            ::= { fa16e1et100Entry 183 }

        fa16e1et100SnmpChannel2  OBJECT-TYPE
            SYNTAX  INTEGER {
                noUse(1),
                use(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card SNMP channel 2:
                1:No use
                2:Use"
            ::= { fa16e1et100Entry 184 }

        fa16e1et100SnmpChannel3  OBJECT-TYPE
            SYNTAX  INTEGER {
                noUse(1),
                use(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card SNMP channel 3:
                1:No use
                2:Use"
            ::= { fa16e1et100Entry 185 }

        fa16e1et100SnmpChannel4  OBJECT-TYPE
            SYNTAX  INTEGER {
                noUse(1),
                use(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card SNMP channel 4:
                1:No use
                2:Use"
            ::= { fa16e1et100Entry 186 }

   --     fa16e1et100SnmpChannel5  OBJECT-TYPE
    --        SYNTAX  INTEGER {
    --            noUse(1),
     --           use(2)
     --       }
     --       MAX-ACCESS  read-write
      --      STATUS  current
      --      DESCRIPTION
      --          "16E1-ET100(T/S) Series card SNMP channel 5:
       --         1:No use
       --         2:Use"
      --      ::= { fa16e1et100Entry 187 }

        fa16e1et100ErrSec  OBJECT-TYPE
            SYNTAX  Counter32
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card, errored seconds of BERT result."
            ::= { fa16e1et100Entry 188 }

        fa16e1et100ErrFreeSec  OBJECT-TYPE
            SYNTAX  Counter32
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card, errored free seconds of BERT result."
            ::= { fa16e1et100Entry 189 }

        fa16e1et100ServErrSec  OBJECT-TYPE
            SYNTAX  Counter32
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card, severely errored seconds of BERT result."
            ::= { fa16e1et100Entry 190 }

        fa16e1et100BertFunction  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card bert function:
                1:Disable
                2:Enable"
            ::= { fa16e1et100Entry 191 }

        fa16e1et100ClrBertData  OBJECT-TYPE
            SYNTAX  INTEGER {
                normal(1),
                clear(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card bert data clear:
                1:Normal
                2:Clear"
            ::= { fa16e1et100Entry 192 }

        fa16e1et100BertE1Channel  OBJECT-TYPE
            SYNTAX  INTEGER {
                e1Channel1(1),
                e1Channel2(2),
                e1Channel3(3),
                e1Channel4(4),
                e1Channel5(5),
                e1Channel6(6),
                e1Channel7(7),
                e1Channel8(8),
                e1Channel9(9),
                e1Channel10(10),
                e1Channel11(11),
                e1Channel12(12),
                e1Channel13(13),
                e1Channel14(14),
                e1Channel15(15),                                
                e1Channel16(16)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card bert E1 channel number:
                1:E1 channel 1
                2:E1 channel 2
                3:E1 channel 3
                4:E1 channel 4
                5:E1 channel 5
                6:E1 channel 6
                7:E1 channel 7
                8:E1 channel 8
                9:E1 channel 9
                10:E1 channel 10
                11:E1 channel 11
                12:E1 channel 12
                13:E1 channel 13
                14:E1 channel 14
                15:E1 channel 15                               
								16:E1 channel 16                                               
                "
            ::= { fa16e1et100Entry 193 }

        fa16e1et100RmonFunction  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series RMON function :
                1:Disable
                2:Enable"
            ::= { fa16e1et100Entry 194 }

        fa16e1et100RmonTx  OBJECT-TYPE
        SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card RMON Tx counter."
            ::= { fa16e1et100Entry 195 }

        fa16e1et100RmonRx  OBJECT-TYPE
        SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card RMON Rx counter."
            ::= { fa16e1et100Entry 196 }

        fa16e1et100ClrRmonTx  OBJECT-TYPE
            SYNTAX  INTEGER {
                normal(1),
                clear(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card clear RMON Tx counter:
                1:Normal
                1:Clear"
            ::= { fa16e1et100Entry 197 }

        fa16e1et100ClrRmonRx  OBJECT-TYPE
            SYNTAX  INTEGER {
                normal(1),
                clear(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card clear RMON Rx counter:
                1:Normal
                1:Clear"
            ::= { fa16e1et100Entry 198 }

        fa16e1et100Sfp  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card, SFP existed:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 199 }

        fa16e1et100SfpVendor  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card, Vendor name of SFP."
            ::= { fa16e1et100Entry 200 }

        fa16e1et100SfpPartNo  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card, Vendor part number of SFP."
            ::= { fa16e1et100Entry 201}

        fa16e1et100SfpFiberType  OBJECT-TYPE
            SYNTAX  INTEGER{
                unknow(1),
                single(2),
                multi(3)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card, Fiber Type of SFP."
            ::= { fa16e1et100Entry 202 }

        fa16e1et100SfpTxWaveLen  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card, Tx Wave length of SFP."
            ::= { fa16e1et100Entry 203 }

        fa16e1et100SfpRxWaveLen  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card, Rx Wave length of SFP."
            ::= { fa16e1et100Entry 204 }

        fa16e1et100SfpLinkLen  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card, Link length of SFP."
            ::= { fa16e1et100Entry 205 }

        fa16e1et100SfpModelID  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card, model ID of SFP."
            ::= { fa16e1et100Entry 206}

        fa16e1et100SfpVersion  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card, the version of SFP."
            ::= { fa16e1et100Entry 207}

        fa16e1et100SfpModelType  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card, model type of SFP."
            ::= { fa16e1et100Entry 208}

        fa16e1et100DDInformation  OBJECT-TYPE
            SYNTAX  INTEGER{
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card, D/D information of SFP Supported:
                1:No,
                2:Yes"
            ::= { fa16e1et100Entry 209 }

        fa16e1et100DDTxPower  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card, Tx power of D/D information."
            ::= { fa16e1et100Entry 210 }

        fa16e1et100DDRxPower  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card, Rx power of D/D information."
            ::= { fa16e1et100Entry 211 }

        fa16e1et100DDRxSens  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card, Sensitivity of D/D information."
            ::= { fa16e1et100Entry 212 }

        fa16e1et100DDTemp  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card, Temperature of D/D information in degree C."
            ::= { fa16e1et100Entry 213 }

        fa16e1et100DDBias  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card, BIAS of D/D information."
            ::= { fa16e1et100Entry 214 }

        fa16e1et100DDVoltage  OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card, Voltage of D/D information."
            ::= { fa16e1et100Entry 215}


        fa16e1et100ChannelDefect  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                set-1E-4(4),
                set-1E-6(6)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card Channel Defect:
                1:Disable
                4:1E-4
                6:1E-6"
            ::= { fa16e1et100Entry 216 } 
 
        fa16e1et100LoopDetection  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card Loop Detection:
                1:Disable
                2:Enable
                "
            ::= { fa16e1et100Entry 217 }             
            
        fa16e1et100LoopCh1  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 1 Loop Check State:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 218 }            

        fa16e1et100LoopCh2  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 2 Loop Check State:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 219 } 
            
        fa16e1et100LoopCh3  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 3 Loop Check State:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 220 } 
            
        fa16e1et100LoopCh4  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 4 Loop Check State:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 221 } 
            
        fa16e1et100LoopCh5  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 5 Loop Check State:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 222 } 

        fa16e1et100LoopCh6  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 6 Loop Check State:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 223 }
            
        fa16e1et100LoopCh7  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 7 Loop Check State:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 224 }
            
        fa16e1et100LoopCh8  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 8 Loop Check State:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 225 }                        

        fa16e1et100LoopCh9  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 9 Loop Check State:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 226 }            

        fa16e1et100LoopCh10  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 10 Loop Check State:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 227 } 
            
        fa16e1et100LoopCh11  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 11 Loop Check State:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 228 } 
            
        fa16e1et100LoopCh12  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 12 Loop Check State:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 229 } 
            
        fa16e1et100LoopCh13  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 13 Loop Check State:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 230 } 

        fa16e1et100LoopCh14  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 14 Loop Check State:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 231 }
            
        fa16e1et100LoopCh15  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 15 Loop Check State:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 232 }
            
        fa16e1et100LoopCh16  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 16 Loop Check State:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 233 }
            
        fa16e1et100DefectCh1  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 1 Defect Status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 234 }            

        fa16e1et100DefectCh2  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 2 Defect Status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 235 }    
            
        fa16e1et100DefectCh3  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 3 Defect Status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 236 }    
            
        fa16e1et100DefectCh4  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 4 Defect Status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 237 }    
            
        fa16e1et100DefectCh5  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 5 Defect Status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 238 }              

        fa16e1et100DefectCh6  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 6 Defect Status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 239 }

        fa16e1et100DefectCh7  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 7 Defect Status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 240 }
            
        fa16e1et100DefectCh8  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 8 Defect Status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 241 }                                    

        fa16e1et100DefectCh9  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 9 Defect Status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 242 }            

        fa16e1et100DefectCh10  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 10 Defect Status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 243 }    
            
        fa16e1et100DefectCh11  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 11 Defect Status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 244 }    
            
        fa16e1et100DefectCh12  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 12 Defect Status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 245 }    
            
        fa16e1et100DefectCh13  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 13 Defect Status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 246 }              

        fa16e1et100DefectCh14  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 14 Defect Status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 247 }

        fa16e1et100DefectCh15  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 15 Defect Status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 248 }
            
        fa16e1et100DefectCh16  OBJECT-TYPE
            SYNTAX  INTEGER {
                no(1),
                yes(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card E1 channel 16 Defect Status:
                1:No
                2:Yes"
            ::= { fa16e1et100Entry 249 }
            
          fa16e1et100FxSignal  OBJECT-TYPE
            SYNTAX  INTEGER {
                unplugged(1),
                detected(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "16E1-ET100(T/S) Series card Fiber signal detect(SD):
                1:Fiber unplugged
                2:Signal detected"
            ::= { fa16e1et100Entry 250 }
                           
		fa16e1et100VlanMode	 OBJECT-TYPE
			SYNTAX  INTEGER {
                mode2(1),
                mode1(2)
            }
            MAX-ACCESS  read-write
            STATUS	current
            DESCRIPTION
            	"16E1-ET100(T/S) Series card Vlan Mode Setting:
            	1:Vlan Mode 2
            	2:Vlan Mode 1"
            ::= { fa16e1et100Entry 251}
            
            
		Fa16e1et100VlanEntry ::=
           SEQUENCE {
               fa16e1et100VlanChassisIndex	 Integer32,
               fa16e1et100VlanSlotIndex		 Integer32,
               fa16e1et100VlanSideIndex       INTEGER,
               
               fa16e1et100VlanEntryIndex	     INTEGER,
               fa16e1et100VlanTag             INTEGER,
               
               fa16e1et100Vlan0				 Integer32,
               fa16e1et100Vlan1              Integer32,
               fa16e1et100Vlan2               Integer32,
               fa16e1et100Vlan3               Integer32,
               fa16e1et100Vlan4               Integer32,
               fa16e1et100Vlan5               Integer32,
               fa16e1et100Vlan6               Integer32,
               fa16e1et100Vlan7               Integer32,
               fa16e1et100Vlan8               Integer32,
               fa16e1et100Vlan9               Integer32,
               fa16e1et100Vlan10              Integer32,
               fa16e1et100Vlan11              Integer32,
               fa16e1et100Vlan12              Integer32,
               fa16e1et100Vlan13              Integer32,
               fa16e1et100Vlan14              Integer32,
               fa16e1et100Vlan15              Integer32           
           }
           
    	   fa16e1et100VlanChassisIndex    OBJECT-TYPE
        	   SYNTAX  Integer32 (0..9)
        	   MAX-ACCESS  read-only
               STATUS  current
               DESCRIPTION
                "A unique value for each card.
                It starts from 0 to 9 contiguously."
               ::= { fa16e1et100VlanEntry 1 }            
               
           fa16e1et100VlanSlotIndex	 OBJECT-TYPE
           	   SYNTAX  Integer32 (1..20)
               MAX-ACCESS  read-only
               STATUS  current
               DESCRIPTION
                "A unique value for each card.
                It starts from 1 to 20 contiguously."
               ::= { fa16e1et100VlanEntry 2 }
               
           fa16e1et100VlanSideIndex   OBJECT-TYPE
               SYNTAX  INTEGER {
                local(1),
                remoteA(2),
                remoteB(3),
                remoteC(4),
                remoteD(5)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "A unique value for each card. It is the card location:
                1:Local area
                2:Remote A or Remote area
                3:Remote B area
                4:Remote C area
                5:Remote D area"
            ::= { fa16e1et100VlanEntry 3 }
            
           fa16e1et100VlanEntryIndex   OBJECT-TYPE
               SYNTAX  INTEGER {
                vlan0(0),
                vlan1(1),
                vlan2(2),
                vlan3(3),
                vlan4(4),
                vlan5(5),
                vlan6(6),
                vlan7(7),
                vlan8(8),
                vlan9(9),
                vlan10(10),
                vlan11(11),
                vlan12(12),
                vlan13(13),
                vlan14(14),
                vlan15(15)
               }
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
                "Vlan entry select index.
                 It start from 0 to 15."
               ::= { fa16e1et100VlanEntry 4 }
               
           fa16e1et100VlanTag   OBJECT-TYPE
               SYNTAX  INTEGER {
                   untouch(1),
                   addTag(2),
                   removeTag(3)
               } 
               MAX-ACCESS  read-write
               STATUS  current
               DESCRIPTION
               "Vlan tag.
                1:Untouch.
                2:Add tag.
                3:Remove tag."
               ::= { fa16e1et100VlanEntry 5 }
		
           fa16e1et100Vlan0   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 0 ID.
                It start from 0 to 4094."
               ::={ fa16e1et100VlanEntry 6 }
               
           fa16e1et100Vlan1   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 1 ID.
                It start from 0 to 4094."
               ::={ fa16e1et100VlanEntry 7 }
           
           fa16e1et100Vlan2   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 2 ID.
                It start from 0 to 4094."
               ::={ fa16e1et100VlanEntry 8 }
               
           fa16e1et100Vlan3   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 3 ID.
                It start from 0 to 4094."
               ::={ fa16e1et100VlanEntry 9 }    
               
           fa16e1et100Vlan4   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 4 ID.
                It start from 0 to 4094."
               ::={ fa16e1et100VlanEntry 10 }
               
           fa16e1et100Vlan5   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 5 ID.
                It start from 0 to 4094."
               ::={ fa16e1et100VlanEntry 11 }     
            
           fa16e1et100Vlan6   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 6 ID.
                It start from 0 to 4094."
               ::={ fa16e1et100VlanEntry 12 }
               
           fa16e1et100Vlan7   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 7 ID.
                It start from 0 to 4094."
               ::={ fa16e1et100VlanEntry 13 }
               
           fa16e1et100Vlan8   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 8 ID.
                It start from 0 to 4094."
               ::={ fa16e1et100VlanEntry 14 }           
           
           fa16e1et100Vlan9   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 9 ID.
                It start from 0 to 4094."
               ::={ fa16e1et100VlanEntry 15 }
               
           fa16e1et100Vlan10   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 10 ID.
                It start from 0 to 4094."
               ::={ fa16e1et100VlanEntry 16 }
               
           fa16e1et100Vlan11   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 11 ID.
                It start from 0 to 4094."
               ::={ fa16e1et100VlanEntry 17 }
               
           fa16e1et100Vlan12   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 12 ID.
                It start from 0 to 4094."
               ::={ fa16e1et100VlanEntry 18 }
               
           fa16e1et100Vlan13   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 13 ID.
                It start from 0 to 4094."
               ::={ fa16e1et100VlanEntry 19 }
               
           fa16e1et100Vlan14   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 14 ID.
                It start from 0 to 4094."
               ::={ fa16e1et100VlanEntry 20 }
               
           fa16e1et100Vlan15   OBJECT-TYPE
               SYNTAX  Integer32 (0..4094)    
               MAX-ACCESS   read-write
               STATUS	current
               DESCRIPTION
               "Vlan 15 ID.
                It start from 0 to 4094."
               ::={ fa16e1et100VlanEntry 21 }  
             
               
               

--Eoe1g            
faeoe1gProject OBJECT IDENTIFIER ::= { faGswSnmp 7000 }  

faeoe1gCards  OBJECT IDENTIFIER ::= { faeoe1gProject 1 }
            
    faeoe1gTable  OBJECT-TYPE
        SYNTAX  SEQUENCE OF Faeoe1gEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "A list of Eoe1g series card entries."
		::= { faeoe1gCards 1 }    
		
		faeoe1gEntry  OBJECT-TYPE
		SYNTAX  Faeoe1gEntry
		MAX-ACCESS  not-accessible
		STATUS  current
		DESCRIPTION
			"An entry containing management information applicable
			to a particular Eoe1g series card."
		INDEX  { faeoe1gChassisIndex, faeoe1gSlotIndex, faeoe1gSideIndex }
		::= { faeoe1gTable 1 }   

    Faeoe1gEntry ::=
		SEQUENCE {
            faeoe1gChassisIndex      Integer32,
            faeoe1gSlotIndex         Integer32,
            faeoe1gSideIndex         INTEGER,
            faeoe1gCardHWVer         DisplayString,
            faeoe1gCardFWVer         DisplayString,
            faeoe1gCardCPLDVer       DisplayString,
            faeoe1gCardFPGAVer       DisplayString,

			faeoe1gLos		     	 INTEGER,
			faeoe1gLof		         INTEGER,
			faeoe1gAIS	         	 INTEGER,
			faeoe1gRAI		         INTEGER,
			faeoe1gCRC		         INTEGER,
			faeoe1gBPV		         INTEGER,
			faeoe1gLoopSts  		 INTEGER, 
			faeoe1gE1Mode			 INTEGER,
			faeoe1gE1LoopBack		 INTEGER,	
			faeoe1gE1Loopdetection	 INTEGER,
			faeoe1gHdlcCrc			 INTEGER,	
			faeoe1gUtpLinkSts		 INTEGER,
			faeoe1gUtpNegoSts		 INTEGER,
			faeoe1gUtpSpeedSts		 INTEGER,
			faeoe1gUtpDuplexSts		 INTEGER,
			faeoe1gUtpFlowCtrlSts	 INTEGER,
			faeoe1gUtpActiveSts		 INTEGER,
			faeoe1gUtpActiveConf	 INTEGER,
			faeoe1gUtpNegoConf		 INTEGER,
			faeoe1gUtpSpeedConf		 INTEGER,
			faeoe1gUtpDuplexConf	 INTEGER,
			faeoe1gUtpFlowCtrlConf	 INTEGER,
			faeoe1gVlanConf			 INTEGER,
			faeoe1gVlanID         	 Integer32,
			faeoe1gTagConf        	 INTEGER,
			faeoe1gTagInsert         INTEGER,
			faeoe1gBandwidthFun		 INTEGER,
			faeoe1gBandwidth         Counter32,
			faeoe1gBandwidthIndex	 Integer32,	 
			faeoe1gE1TimingSource    INTEGER,
			faeoe1gFailover   	     INTEGER,
			faeoe1gEncapsulation  	 INTEGER,
			faeoe1gNetManageChannel  INTEGER,
			faeoe1gDeviceReset   	 INTEGER,   
			faeoe1gSetToDefault   	 INTEGER,
			faeoe1gErrSec        	 Counter32,
            faeoe1gServErrSec     	 Counter32,
            faeoe1gBertFun  	     INTEGER,     
            faeoe1gClrBertData       INTEGER,    
            faeoe1gRmonFunction   	 INTEGER,
            faeoe1gRxPacket          DisplayString,
            faeoe1gRxByte            DisplayString,
            faeoe1gClrRxPacket       INTEGER,
            faeoe1gClrRxByte         INTEGER,
            faeoe1gRemoteDevice    	 INTEGER,
  			faeoe1gRemotePower    	 INTEGER   
    }

      faeoe1gChassisIndex OBJECT-TYPE
            SYNTAX  Integer32 (0..9)
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "A unique value for each card.
                It starts from 0 to 9 contiguously."
            ::= { faeoe1gEntry 1 }

        faeoe1gSlotIndex OBJECT-TYPE
            SYNTAX  Integer32 (1..20)
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "A unique value for each card.
                It starts from 1 to 20 contiguously."
            ::= { faeoe1gEntry 2 }

        faeoe1gSideIndex OBJECT-TYPE
            SYNTAX  INTEGER {
                local(1),
                remoteA(2),
                remoteB(3),
                remoteC(4),
                remoteD(5)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "A unique value for each card. It is the card location:
                1:Local area
                2:Remote A or Remote area
                3:Remote B area
                4:Remote C area
                5:Remote D area"
            ::= { faeoe1gEntry 3 }

        faeoe1gCardHWVer OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "Eoe1g Series card hardware version x.xxx"
            ::= { faeoe1gEntry 4 }

        faeoe1gCardFWVer OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "Eoe1g Series card firmware version x.xxx"
            ::= { faeoe1gEntry 5 }

        faeoe1gCardCPLDVer OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "Eoe1g Series card CPLD version x.xxx"
            ::= { faeoe1gEntry 6 }

        faeoe1gCardFPGAVer OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "Eoe1g Series card FPGA version x.xxx"
            ::= { faeoe1gEntry 7 }


		faeoe1gLos OBJECT-TYPE
			SYNTAX  INTEGER {
						no(1),
						yes(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local Eoe1g E1 Los status:
				1:No
				2:Yes"
			::= { faeoe1gEntry 8 }  
			
		faeoe1gLof OBJECT-TYPE
			SYNTAX  INTEGER {
						no(1),
						yes(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local Eoe1g E1 Lof status:
				1:No
				2:Yes"
			::= { faeoe1gEntry 9 }
			
		faeoe1gAIS  OBJECT-TYPE
			SYNTAX  INTEGER {
						no(1),
						yes(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local Eoe1g E1 AIS status:
				1:No
				2:Yes"
			::= { faeoe1gEntry 10 }
		  
		faeoe1gRAI OBJECT-TYPE
			SYNTAX  INTEGER {
						no(1),
						yes(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local Eoe1g E1 RAI status:
				1:No
				2:Yes"
			::= { faeoe1gEntry 11 } 
		
		faeoe1gCRC OBJECT-TYPE
			SYNTAX  INTEGER {
						no(1),
						yes(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local Eoe1g E1 CRC status:
				1:No
				2:Yes"
			::= { faeoe1gEntry 12 }
		
		faeoe1gBPV OBJECT-TYPE
			SYNTAX  INTEGER {
						no(1),
						yes(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local Eoe1g E1 BPV status:
				1:No
				2:Yes"
			::= { faeoe1gEntry 13 }
        
       faeoe1gLoopSts OBJECT-TYPE
			SYNTAX  INTEGER {
						no(1),
						yes(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local Eoe1g E1 Loop status:
				1:No
				2:Yes"
			::= { faeoe1gEntry 14 } 
			
	   faeoe1gE1Mode OBJECT-TYPE
			SYNTAX  INTEGER {
						unframe(1),
						frame(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1g Series card E1 mode:
				1:Unframe
				2:Frame"
			::= { faeoe1gEntry 15 }		
	
	 faeoe1gE1LoopBack OBJECT-TYPE
			SYNTAX  INTEGER {
						off(1),
						llb(2),
						rlb(3)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1g Series card E1 loop back:
				1:OFF
				2:LLB
				3:RLB"
			::= { faeoe1gEntry 16 }			
			
	faeoe1gE1Loopdetection OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1g Series card E1 loop detection:
				1:Disable
				2:Enable"
			::= { faeoe1gEntry 17 }
				
	faeoe1gHdlcCrc OBJECT-TYPE
			SYNTAX  INTEGER {
						inverse(1),
						consistent(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1g Series card E1 hdlc crc:
				1:Inverse (CTC)
				2:Consistent (EN1000)"
			::= { faeoe1gEntry 18 }
	
	faeoe1gUtpLinkSts OBJECT-TYPE
			SYNTAX  INTEGER {
						down(1),
						up(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local Eoe1g Utp link:
				1:Link down
				2:Link up"
			::= { faeoe1gEntry 19 }
			   
	faeoe1gUtpNegoSts OBJECT-TYPE
			SYNTAX  INTEGER {
						manual(1),
						auto(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local Eoe1g  Utp negotiation:
				1:Manual
				2:Auto"
			::= { faeoe1gEntry 20 }
	
	faeoe1gUtpSpeedSts OBJECT-TYPE
			SYNTAX  INTEGER {
						speed-10(1),
						speed-100(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local Eoe1g Utp speed:
				1:10
				2:100"
			::= { faeoe1gEntry 21}
	
	faeoe1gUtpDuplexSts OBJECT-TYPE
			SYNTAX  INTEGER {
						half(1),
						full(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local Eoe1g Utp duplex:
				1:Half
				2:Full"
			::= { faeoe1gEntry 22}
	
	faeoe1gUtpFlowCtrlSts OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local Eoe1g Utp duplex:
				1:Disable
				2:Enable"
			::= { faeoe1gEntry 23}
	
	faeoe1gUtpActiveSts OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local Eoe1g Utp active:
				1:Disable
				2:Enable"
			::= { faeoe1gEntry 24}  
	
	
	faeoe1gUtpActiveConf OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1g Series card Utp link config:
				1:Disable
				2:Enable"
			::= { faeoe1gEntry 25 }
    
    
	faeoe1gUtpNegoConf OBJECT-TYPE
			SYNTAX  INTEGER {
						manual(1),
						auto(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1g Series card Utp neog config:
				1:Manual
				2:Auto"
			::= { faeoe1gEntry 26 }       
			
	faeoe1gUtpSpeedConf OBJECT-TYPE
			SYNTAX  INTEGER {
						speed-10(1),
						speed-100(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1g Series card Utp speed config:
				1:10
				2:100"
			::= { faeoe1gEntry 27 }  
			
	faeoe1gUtpDuplexConf OBJECT-TYPE
			SYNTAX  INTEGER {
						half(1),
						full(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1g Series card Utp duplex config:
				1:Half
				2:Full"
			::= { faeoe1gEntry 28 }   
			
	faeoe1gUtpFlowCtrlConf OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1g Series card Utp flow control config:
				1:Disable
				2:Enable"
			::= { faeoe1gEntry 29 }
		                                 
	faeoe1gVlanConf OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1g Series card VLAN config:
				1:Disable
				2:Enable"
			::= { faeoe1gEntry 30 }     	

     faeoe1gVlanID  OBJECT-TYPE
            SYNTAX  Integer32 (1..4094)
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "EOE1/G Series card VLAN ID:
                The ID is restricted to 1 ~ 4094"
            ::= { faeoe1gEntry 31 }   
            
     faeoe1gTagConf  OBJECT-TYPE
			SYNTAX  INTEGER {
						untag(1),
						tag(2),
						no-touch(3)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1g Series card Tag config:
				1:Untag
				2:Tag
				3:No Touch"
			::= { faeoe1gEntry 32 } 
	
   	faeoe1gTagInsert  OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1g Series card Tag config:
				1:Disable
				2:Enable"
			::= { faeoe1gEntry 33 }  
	
	faeoe1gBandwidthFun  OBJECT-TYPE
			SYNTAX  INTEGER {
						off(1),
						n-32(2),
						n-512(3)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1g Series Bandwidth config:
				1:OFF
				2:32*N(0~255)
				3:512*N(0~200)"
			::= { faeoe1gEntry 34 }  
	
	 faeoe1gBandwidth  OBJECT-TYPE
        SYNTAX  Counter32
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "EOE1/G  Series card Bandwidth speed."
            ::= { faeoe1gEntry 35 } 
            
    faeoe1gBandwidthIndex  OBJECT-TYPE
            SYNTAX  Integer32 (0..255)
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "EOE1/G Series card Bandwidth index:
                32*N. The bandwidth index is restricted to 0 ~ 255
                512*N. The bandwidth index is restricted to 0 ~ 200"
            ::= { faeoe1gEntry 36 }  		
 			
	
			
	faeoe1gE1TimingSource  OBJECT-TYPE
			SYNTAX  INTEGER {
						recovery(1),
						internal(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1g Series card E1 transmit timing source:
				1:Recovery from E1 receive
				2:Internal oscillator"
			::= { faeoe1gEntry 37 }
		
	 faeoe1gFailover  OBJECT-TYPE
			SYNTAX  INTEGER {
						off(1),
						on(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1g Series card Failover:
				1:OFF
				2:ON"
			::= { faeoe1gEntry 38 }

	   faeoe1gEncapsulation  OBJECT-TYPE
			SYNTAX  INTEGER {
						gfp(1),
						hdlc(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1g Series card Encapsulation:
				1:GFP
				2:HDLC"
			::= { faeoe1gEntry 39 }
        
       faeoe1gNetManageChannel  OBJECT-TYPE
			SYNTAX  INTEGER {
						out-band(1),
						in-band(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1g Series card Net manage channel:
				1:Out band
				2:In band"
			::= { faeoe1gEntry 40 }  
		
		faeoe1gDeviceReset  OBJECT-TYPE
            SYNTAX  INTEGER {
                normal(1),
                active(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "EOE1/G Series card device reset:
                1:Normal
                2:Active"
            ::= { faeoe1gEntry 41 }
		
		

        faeoe1gSetToDefault  OBJECT-TYPE
            SYNTAX  INTEGER {
                normal(1),
                active(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "EOE1/G Series card port set to default:
                1:Normal
                2:Active"
            ::= { faeoe1gEntry 42 }
				
	 		
	
        
       faeoe1gErrSec  OBJECT-TYPE
            SYNTAX  Counter32
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "EOE1/G Series card, errored seconds of BERT result."
            ::= { faeoe1gEntry 43 }
       

        faeoe1gServErrSec  OBJECT-TYPE
            SYNTAX  Counter32
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "EOE1/G Series card, severely errored seconds of BERT result."
            ::= { faeoe1gEntry 44 } 
            
       faeoe1gBertFun  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "EOE1/G Series card bert function:
                1:Disable
                2:Enable"
            ::= { faeoe1gEntry 45 } 
            
       faeoe1gClrBertData  OBJECT-TYPE
            SYNTAX  INTEGER {
                normal(1),
                clear(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "EOE1/G  Series card bert data clear:
                1:Normal
                2:Clear"
            ::= { faeoe1gEntry 46 }
 
       faeoe1gRmonFunction  OBJECT-TYPE
            SYNTAX  INTEGER {
                disable(1),
                enable(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "EOE1/G  Series RMON function :
                1:Disable
                2:Enable"
            ::= { faeoe1gEntry 47}    
    	
      faeoe1gRxPacket  OBJECT-TYPE
        SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "EOE1/G  Series card Rx packet."
            ::= { faeoe1gEntry 48 } 
      

        faeoe1gRxByte OBJECT-TYPE
        SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "EOE1/G Series card Rx byte."
            ::= { faeoe1gEntry 49 } 
            
        
        faeoe1gClrRxPacket  OBJECT-TYPE
            SYNTAX  INTEGER {
                normal(1),
                clear(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "EOE1/G  Series card clear Rx packet:
                1:Normal
                1:Clear"
            ::= { faeoe1gEntry 50}
                              

        faeoe1gClrRxByte  OBJECT-TYPE
            SYNTAX  INTEGER {
                normal(1),
                clear(2)
            }
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "EOE1/G Series card clear  Rx byte:
                1:Normal
                1:Clear"
            ::= { faeoe1gEntry 51 }
            
       faeoe1gRemoteDevice  OBJECT-TYPE
            SYNTAX  INTEGER {
                linkDown(1),
                linkUp(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "EOE1/G Series card remote device status:
                1:Link Down
                2:Link Up"
            ::= { faeoe1gEntry 52 }   
            
         faeoe1gRemotePower  OBJECT-TYPE
            SYNTAX  INTEGER {
                normal(1),
                off(2)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "EOE1/G Series card remote device power status:
                1:Normal
                2:Power off"
            ::= { faeoe1gEntry 53 }	                                 
			     
--Eoe1
            
faeoe1Project OBJECT IDENTIFIER ::= { faGswSnmp 3100 } 

faeoe1Cards  OBJECT IDENTIFIER ::= { faeoe1Project 1 }

    faeoe1Table  OBJECT-TYPE
        SYNTAX  SEQUENCE OF Faeoe1Entry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "A list of Eoe1 series card entries."
		::= { faeoe1Cards 1 }

	faeoe1Entry  OBJECT-TYPE
		SYNTAX  Faeoe1Entry
		MAX-ACCESS  not-accessible
		STATUS  current
		DESCRIPTION
			"An entry containing management information applicable
			to a particular Eoe1 series card."
		INDEX  { faeoe1ChassisIndex, faeoe1SlotIndex, faeoe1SideIndex }
		::= { faeoe1Table 1 }

	Faeoe1Entry ::=
		SEQUENCE {
            faeoe1ChassisIndex      Integer32,
            faeoe1SlotIndex         Integer32,
            faeoe1SideIndex         INTEGER,
            faeoe1CardHWVer         DisplayString,
            faeoe1CardFWVer         DisplayString,
            faeoe1CardCPLDVer       DisplayString,
            faeoe1CardFPGAVer       DisplayString,

						faeoe1PortActive	          INTEGER,
						faeoe1PortReset		      INTEGER,
						faeoe1SettoDefault		  INTEGER,
						faeoe1Signal		          INTEGER,
						faeoe1Sync		          INTEGER,
						faeoe1RdSTS		          INTEGER,
						faeoe1TdSTS		          INTEGER,
						faeoe1ReAis		          INTEGER,
					  faeoe1LOMF		              INTEGER,
					  faeoe1LinecodeViolation      INTEGER,
					  faeoe1BertErr		          INTEGER,
					  faeoe1RemoPwAb		          INTEGER,
   					  faeoe1Test				  INTEGER,
   					  faeoe1E1Alarm				  INTEGER,
					  faeoe1Utp1Link		          INTEGER,
					  faeoe1Utp1SpeedSTS		      INTEGER,
					  faeoe1Utp1DuplexSTS		  INTEGER,
					  faeoe1Utp1Mode		          INTEGER,
					  faeoe1Utp1FlowCrl		      INTEGER,
					  faeoe1Frame		          INTEGER,
					  faeoe1TimeSlot1		      INTEGER,
					  faeoe1TimeSlot2		      INTEGER,
					  faeoe1TimeSlot3		      INTEGER,
					  faeoe1TimeSlot4		      INTEGER,
					  faeoe1TimeSlot5		      INTEGER,
					  faeoe1TimeSlot6		      INTEGER,
					  faeoe1TimeSlot7		      INTEGER,
					  faeoe1TimeSlot8		      INTEGER,
					  faeoe1TimeSlot9		      INTEGER,
					  faeoe1TimeSlot10		      INTEGER,
					  faeoe1TimeSlot11		      INTEGER,
					  faeoe1TimeSlot12		      INTEGER,
					  faeoe1TimeSlot13		      INTEGER,
					  faeoe1TimeSlot14		      INTEGER,
					  faeoe1TimeSlot15		      INTEGER,
					  faeoe1TimeSlot16		      INTEGER,
					  faeoe1TimeSlot17		      INTEGER,
					  faeoe1TimeSlot18		      INTEGER,
					  faeoe1TimeSlot19		      INTEGER,
					  faeoe1TimeSlot20		      INTEGER,
					  faeoe1TimeSlot21		      INTEGER,
					  faeoe1TimeSlot22		      INTEGER,
					  faeoe1TimeSlot23		      INTEGER,
					  faeoe1TimeSlot24		      INTEGER,
					  faeoe1TimeSlot25		      INTEGER,
					  faeoe1TimeSlot26		      INTEGER,
					  faeoe1TimeSlot27		      INTEGER,
					  faeoe1TimeSlot28		      INTEGER,
					  faeoe1TimeSlot29		      INTEGER,
					  faeoe1TimeSlot30		      INTEGER,
					  faeoe1TimeSlot31		      INTEGER,
					  faeoe1TimeSource             INTEGER,
					  faeoe1Framer		          INTEGER,
					  faeoe1Linecode		          INTEGER,
					  faeoe1LineImpedance		  INTEGER,
					  faeoe1IdelCode		          INTEGER,
					  faeoe1Ais		              INTEGER,
					  faeoe1RLB		              INTEGER,
					  faeoe1RRLB		              INTEGER,
					  faeoe1Bert		              INTEGER,
					  faeoe1CounterCrl		      INTEGER,
					  faeoe1RmonIn		          DisplayString,
					  faeoe1RmonOut		          DisplayString,
					  faeoe1CrlRmonCntsRx		  INTEGER,
					  faeoe1CrlRmonCntsTx		  INTEGER             	         
    }

        faeoe1ChassisIndex OBJECT-TYPE
            SYNTAX  Integer32 (0..9)
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "A unique value for each card.
                It starts from 0 to 9 contiguously."
            ::= { faeoe1Entry 1 }

        faeoe1SlotIndex OBJECT-TYPE
            SYNTAX  Integer32 (1..20)
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "A unique value for each card.
                It starts from 1 to 20 contiguously."
            ::= { faeoe1Entry 2 }

        faeoe1SideIndex OBJECT-TYPE
            SYNTAX  INTEGER {
                local(1),
                remoteA(2),
                remoteB(3),
                remoteC(4),
                remoteD(5)
            }
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "A unique value for each card. It is the card location:
                1:Local area
                2:Remote A or Remote area
                3:Remote B area
                4:Remote C area
                5:Remote D area"
            ::= { faeoe1Entry 3 }

        faeoe1CardHWVer OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "Eoe1 Series card hardware version x.xxx"
            ::= { faeoe1Entry 4 }

        faeoe1CardFWVer OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "Eoe1 Series card firmware version x.xxx"
            ::= { faeoe1Entry 5 }

        faeoe1CardCPLDVer OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "Eoe1 Series card CPLD version x.xxx"
            ::= { faeoe1Entry 6 }

        faeoe1CardFPGAVer OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-only
            STATUS  current
            DESCRIPTION
                "Eoe1 Series card FPGA version x.xxx"
            ::= { faeoe1Entry 7 }


		faeoe1PortActive OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card active:
				1:Disable
				2:Enable"
			::= { faeoe1Entry 8 }

		faeoe1PortReset OBJECT-TYPE
			SYNTAX  INTEGER {
						off(1),
						action(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card portreset:
				1:OFF
				2:Action"
			::= { faeoe1Entry 9 }

		faeoe1SettoDefault OBJECT-TYPE
			SYNTAX  INTEGER {
						off(1),
						action(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card set to default:
				1:OFF
				2:Action"
			::= { faeoe1Entry 10 }
			
		faeoe1Signal OBJECT-TYPE
			SYNTAX  INTEGER {
						signal-loss(1),
						normal(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card E1 signal status:
				1:Signal Loss
				2:Normal"
			::= { faeoe1Entry 11 }

		faeoe1Sync OBJECT-TYPE
			SYNTAX  INTEGER {
						sync-loss(1),
						normal(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card E1 sync status:
				1:Sync Loss
				2:Normal"
			::= { faeoe1Entry 12 }
				
		faeoe1RdSTS OBJECT-TYPE
			SYNTAX  INTEGER {
						on(1),
						off(2),
						flash(3)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card RD status:
				1:ON
				2:OFF
        3:Flash"
			::= { faeoe1Entry 13 }

		faeoe1TdSTS OBJECT-TYPE
			SYNTAX  INTEGER {
						on(1),
						off(2),
						flash(3)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card TD status:
				1:ON
				2:OFF
        3:Flash"
			::= { faeoe1Entry 14 }
			
		faeoe1ReAis OBJECT-TYPE
			SYNTAX  INTEGER {
						no(1),
						have(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card E1 receive AIS:
        1:NO
				2:Have"
			::= { faeoe1Entry 15 }
    
    faeoe1LOMF OBJECT-TYPE
			SYNTAX  INTEGER {
						no(1),
						have(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card E1 loss of multiframe sync:
        1:NO
				2:Have"
			::= { faeoe1Entry 16 }

		faeoe1LinecodeViolation OBJECT-TYPE
			SYNTAX  INTEGER {
						no(1),
						have(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card E1 line code violation:
				1:NO
				2:Have"
			::= { faeoe1Entry 17 }

		faeoe1BertErr OBJECT-TYPE
			SYNTAX  INTEGER {
						no(1),
						have(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card E1 bert error:
				1:NO
				2:Have"
			::= { faeoe1Entry 18 }
				
		faeoe1RemoPwAb OBJECT-TYPE
			SYNTAX  INTEGER {
						ok(1),
						failue(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card remote power fail:
				1:OK
				2:Failue"
			::= { faeoe1Entry 19 }
			
		faeoe1Test OBJECT-TYPE
			SYNTAX  INTEGER {
						off(1),
						on(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card loopback state:
				1:Off
				2:On"
			::= { faeoe1Entry 20 }


		faeoe1E1Alarm OBJECT-TYPE
			SYNTAX  INTEGER {
						off(1),
						on(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card E1 alarm state:
				1:Off
				2:On"
			::= { faeoe1Entry 21 }


		faeoe1Utp1Link OBJECT-TYPE
			SYNTAX  INTEGER {
						down(1),
						up(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card utp link status:
				1:Link down
				2:Lind up"
			::= { faeoe1Entry 22 }
			
		faeoe1Utp1SpeedSTS OBJECT-TYPE
			SYNTAX  INTEGER {
						speed10(1),
						speed100(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card utp1 speed status :
				1:10M
				2:100M"
			::= { faeoe1Entry 23 }
    
    faeoe1Utp1DuplexSTS OBJECT-TYPE
			SYNTAX  INTEGER {
						half(1),
						full(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card utp1 duplex status :
				1:Half
				2:Full"
			::= { faeoe1Entry 24 }

    faeoe1Utp1Mode  OBJECT-TYPE
        SYNTAX  INTEGER {            
            autoNegotiation(1),
            force10MbpsHDX(2),
            force10MbpsFDX(3),
            force100MbpsHDX(4),
            force100MbpsFDX(5)
        }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "Eoe1 Series card UTP mode:            
            1:Enable and autoNegotiation
            2:Enable and force to 10Mbps, Half duplex
            3:Enable and force to 10Mbps, Full duplex
            4:Enable and force to 100Mbps, Half duplex
            5:Enable and force to 100Mbps, Full duplex"
        ::= { faeoe1Entry 25 }
				
		faeoe1Utp1FlowCrl OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card utp1 flow control:
				1:Disable
				2:Enable"
			::= { faeoe1Entry 26 }
   
     faeoe1Frame OBJECT-TYPE
			SYNTAX  INTEGER {
						unframed(1),
						framed(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card E1 frame:
				1:Unframed
				2:Framed"
			::= { faeoe1Entry 27 }

		faeoe1TimeSlot1 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card timeslot1:
				1:Inactive
				2:Active"
			::= { faeoe1Entry 28 }
			
		faeoe1TimeSlot2 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card timeslot2:
				1:Inactive
				2:Active"
			::= { faeoe1Entry 29 }

		faeoe1TimeSlot3 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card timeslot3:
				1:Inactive
				2:Active"
			::= { faeoe1Entry 30 }
			
		faeoe1TimeSlot4 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card timeslot4:
				1:Inactive
				2:Active"
			::= { faeoe1Entry 31 }

		faeoe1TimeSlot5 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card timeslot5:
				1:Inactive
				2:Active"
			::= { faeoe1Entry 32 }
			
		faeoe1TimeSlot6 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card timeslot6:
				1:Inactive
				2:Active"
			::= { faeoe1Entry 33 }

    faeoe1TimeSlot7 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card timeslot7:
				1:Inactive
				2:Active"
			::= { faeoe1Entry 34 }

		faeoe1TimeSlot8 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card timeslot8:
				1:Inactive
				2:Active"
			::= { faeoe1Entry 35 }
			
		faeoe1TimeSlot9 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card timeslot9:
				1:Inactive
				2:Active"
			::= { faeoe1Entry 36 }

		faeoe1TimeSlot10 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card timeslot10:
				1:Inactive
				2:Active"
			::= { faeoe1Entry 37 }
				
		faeoe1TimeSlot11 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card timeslot11:
				1:Inactive
				2:Active"
			::= { faeoe1Entry 38 }

		faeoe1TimeSlot12 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card timeslot12:
				1:Inactive
				2:Active"
			::= { faeoe1Entry 39 }
			
		faeoe1TimeSlot13 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card timeslot13:
				1:Inactive
				2:Active"
			::= { faeoe1Entry 40 }
    
    faeoe1TimeSlot14 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card timeslot14:
				1:Inactive
				2:Active"
			::= { faeoe1Entry 41 }  
      	
		faeoe1TimeSlot15 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local E1 Series card timeslot15:
				1:Inactive
				2:Active"
			::= { faeoe1Entry 42 }

		faeoe1TimeSlot16 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local E1 Series card timeslot16:
				1:Inactive
				2:Active"
			::= { faeoe1Entry 43 }  
      	
		faeoe1TimeSlot17 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card timeslot17:
				1:Inactive
				2:Active"
			::= { faeoe1Entry 44 }
		
		faeoe1TimeSlot18 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card timeslot18:
				1:Inactive
				2:Active"
			::= { faeoe1Entry 45 }  
      	
		faeoe1TimeSlot19 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card timeslot19:
				1:Inactive
				2:Active"
			::= { faeoe1Entry 46 }

		faeoe1TimeSlot20 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card timeslot20:
				1:Inactive
				2:Active"
			::= { faeoe1Entry 47 }  
      	
		faeoe1TimeSlot21 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card timeslot21:
				1:Inactive
				2:Active"
			::= { faeoe1Entry 48 }
    
    faeoe1TimeSlot22 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card timeslot22:
				1:Inactive
				2:Active"
			::= { faeoe1Entry 49 }  
      	
		faeoe1TimeSlot23 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card timeslot23:
				1:Inactive
				2:Active"
			::= { faeoe1Entry 50 }
			
		faeoe1TimeSlot24 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card timeslot24:
				1:Inactive
				2:Active"
			::= { faeoe1Entry 51 }  
      	
		faeoe1TimeSlot25 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card timeslot25:
				1:Inactive
				2:Active"
			::= { faeoe1Entry 52 }
			
		faeoe1TimeSlot26 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card timeslot26:
				1:Inactive
				2:Active"
			::= { faeoe1Entry 53 }  
      	
		faeoe1TimeSlot27 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card timeslot27:
				1:Inactive
				2:Active"
			::= { faeoe1Entry 54 }
			
		faeoe1TimeSlot28 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card timeslot28:
				1:Inactive
				2:Active"
			::= { faeoe1Entry 55 }

		faeoe1TimeSlot29 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card timeslot29:
				1:Inactive
				2:Active"
			::= { faeoe1Entry 56 }

		faeoe1TimeSlot30 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card timeslot30:
				1:Inactive
				2:Active"
			::= { faeoe1Entry 57 }
      
     faeoe1TimeSlot31 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card timeslot31:
				1:Inactive
				2:Active"
			::= { faeoe1Entry 58 }
     
     faeoe1TimeSource OBJECT-TYPE
			SYNTAX  INTEGER {
						recovery-from-e1(1),
						internal-oscillator(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card time souce:
				1:Recovery from E1
				2:Internal oscillator"
			::= { faeoe1Entry 59 }
      
     faeoe1Framer OBJECT-TYPE
			SYNTAX  INTEGER {
						ccs(1),
						cas(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card E1 framer:
				1:CCS
				2:CAS"
			::= { faeoe1Entry 60 }
			
		faeoe1Linecode OBJECT-TYPE
			SYNTAX  INTEGER {
						hdb3(1),
						ami(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card E1 line code:
				1:HDB3
				2:AMI"
			::= { faeoe1Entry 61 }
			
		faeoe1LineImpedance OBJECT-TYPE
			SYNTAX  INTEGER {
						impedance-120(1),
						impedance-75(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card E1 line impedance:
				1:120 ohms
				2:65 ohms"
			::= { faeoe1Entry 62 }
	
	  faeoe1IdelCode OBJECT-TYPE
			SYNTAX  INTEGER {
						ox7e(1),
						oxff(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card E1 unused timeslot code:
				1:0x7E
				2:0xFF"
			::= { faeoe1Entry 63 }			

			
		faeoe1Ais OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card E1 AIS:
				1:Disable
				2:Enable"
			::= { faeoe1Entry 64 }
			
		faeoe1RLB OBJECT-TYPE
			SYNTAX  INTEGER {
						off(1),
						on(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card loop back test:
				1:OFF
				2:ON
                "
			::= { faeoe1Entry 65 }

		faeoe1RRLB OBJECT-TYPE
			SYNTAX  INTEGER {
						off(1),
						on(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card loop back test:
				1:OFF
				2:ON
                "
			::= { faeoe1Entry 66 }
			
		faeoe1Bert OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card bert test:
				1:Disable
				2:Enable"
			::= { faeoe1Entry 67 }
			
		faeoe1CounterCrl OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card counter control:
				1:Disable
				2:Enable"
			::= { faeoe1Entry 68 }
    	
		faeoe1RmonIn OBJECT-TYPE
      SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card RMON Rx counter:"
			::= { faeoe1Entry 69 }
			
		faeoe1RmonOut OBJECT-TYPE
      SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card RMON Rx counter:"
			::= { faeoe1Entry 70 }
			
		faeoe1CrlRmonCntsRx OBJECT-TYPE
			SYNTAX  INTEGER {
						no(1),
						clear(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card clear RMON Rx:
				1:NO
				2:Clear"
			::= { faeoe1Entry 71 }
			
		faeoe1CrlRmonCntsTx OBJECT-TYPE
			SYNTAX  INTEGER {
						no(1),
						clear(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local Eoe1 Series card clear RMON Tx:
				1:NO
				2:Clear"
			::= { faeoe1Entry 72 }            


-- E1/DATA Series
fae1dataProject OBJECT IDENTIFIER ::= { faGswSnmp 3000 }
    
fae1dataCards  OBJECT IDENTIFIER ::= { fae1dataProject 1 }
         
	fae1dataTable OBJECT-TYPE
		SYNTAX      SEQUENCE OF Fae1dataEntry
		MAX-ACCESS  not-accessible
		STATUS      current
		DESCRIPTION
				"A list of  FRM220A-E1/DATA series card entries.
				The number of entries is fae1data-No-L."
		::= { fae1dataCards 1 }

	fae1dataEntry OBJECT-TYPE
		SYNTAX      Fae1dataEntry
		MAX-ACCESS  not-accessible
		STATUS      current
		DESCRIPTION
				"An entry containing management information applicable
				to a particular  FRM220A-E1/DATA series card."
		INDEX   { fE1DATAChassisIndex, fE1DATASlotIndex, fE1DATASideIndex }
		::= {  fae1dataTable 1 } 

	Fae1dataEntry ::=
		SEQUENCE {  
				  fE1DATAChassisIndex	      INTEGER,
				  fE1DATASlotIndex		      INTEGER,
				  fE1DATASideIndex		      INTEGER,
				  fE1DATACardHWVer		      DisplayString,
				  fE1DATACardFWVer		      DisplayString,
				  fE1DATACardCPLDVer	      DisplayString,
				  fE1DATACardFPGAVer	      DisplayString,
				  fE1DATAPortActive	      	  INTEGER,
				  fE1DATAPortReset		      INTEGER,
				  fE1DATASettoDefault		  INTEGER,
				  fE1DATASignal		          INTEGER,
				  fE1DATASync		          INTEGER,
				  fE1DATAReAis		          INTEGER,
				  fE1DATAE1Alarm		      INTEGER,
				  fE1DATALOMF		          INTEGER,
				  fE1DATALinecodeViolation    INTEGER,
				  fE1DATAConnector            INTEGER,
				  fE1DATARdSTS		          INTEGER,
				  fE1DATATdSTS		          INTEGER,
				  fE1DATARtsSTS		      	  INTEGER,
				  fE1DATACtsSTS		      	  INTEGER,
				  fE1DATADcdSTS		      	  INTEGER,
				  fE1DATADsrSTS		      	  INTEGER,
				  fE1DATADtrSTS		      	  INTEGER,
				  fE1DATARemoPwAb		      INTEGER,
				  fE1DATABertErr		      INTEGER,
				  fE1DATACableAdaptedSTS	  INTEGER,
				  fE1DATAFrame		          INTEGER,
				  fE1DATATimeSlot1		      INTEGER,
				  fE1DATATimeSlot2		      INTEGER,
				  fE1DATATimeSlot3		      INTEGER,
				  fE1DATATimeSlot4		      INTEGER,
				  fE1DATATimeSlot5		      INTEGER,
				  fE1DATATimeSlot6		      INTEGER,
				  fE1DATATimeSlot7		      INTEGER,
				  fE1DATATimeSlot8		      INTEGER,
				  fE1DATATimeSlot9		      INTEGER,
				  fE1DATATimeSlot10		  	  INTEGER,
				  fE1DATATimeSlot11		  	  INTEGER,
				  fE1DATATimeSlot12		  	  INTEGER,
				  fE1DATATimeSlot13	      	  INTEGER,
				  fE1DATATimeSlot14		  	  INTEGER,
				  fE1DATATimeSlot15		  	  INTEGER,
				  fE1DATATimeSlot16		  	  INTEGER,
				  fE1DATATimeSlot17		  	  INTEGER,
				  fE1DATATimeSlot18		  	  INTEGER,
				  fE1DATATimeSlot19		  	  INTEGER,
				  fE1DATATimeSlot20		  	  INTEGER,
				  fE1DATATimeSlot21		  	  INTEGER,
				  fE1DATATimeSlot22		  	  INTEGER,
				  fE1DATATimeSlot23		  	  INTEGER,
				  fE1DATATimeSlot24		  	  INTEGER,
				  fE1DATATimeSlot25		  	  INTEGER,
				  fE1DATATimeSlot26		  	  INTEGER,
				  fE1DATATimeSlot27		  	  INTEGER,
				  fE1DATATimeSlot28		  	  INTEGER,
				  fE1DATATimeSlot29		  	  INTEGER,
				  fE1DATATimeSlot30		  	  INTEGER,
				  fE1DATATimeSlot31		  	  INTEGER,
				  fE1DATATimeSource           INTEGER,
				  fE1DATARcPolarity           INTEGER,
				  fE1DATATcPolarity           INTEGER,
				  fE1DATAEtcPolarity          INTEGER,
				  fE1DATALinecode		      INTEGER,
				  fE1DATAFramer		      	  INTEGER,
				  fE1DATAAis		          INTEGER,				  
				  fE1DATADataPortType		  INTEGER,
				  fE1DATADteDce		      	  INTEGER,
				  fE1DATADataPortService	  INTEGER,
				  fE1DATALbsetting		      INTEGER,
				  fE1DATALbsettingSel		  INTEGER,
				  fE1DATABert		          INTEGER,				  
				  fE1DATAUnusedTimeslot	  	  INTEGER,
				  fE1DATACtsRts		      	  INTEGER,
				  fE1DATADsrDtr		      	  INTEGER,
				  fE1DATATestSTS              INTEGER,
				  fE1DATADataportLLB          INTEGER,
				  fE1DATARate                 INTEGER                  
	}
       fE1DATAChassisIndex OBJECT-TYPE
			SYNTAX  INTEGER (0..9)
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"A unique value for each  card. 
				It is the slot location number."
			::= { fae1dataEntry 1 }

		fE1DATASlotIndex OBJECT-TYPE
			SYNTAX  INTEGER (1..20)
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"A unique value for each  card. 
				It is the slot location number."
			::= { fae1dataEntry 2 }  
			
		fE1DATASideIndex OBJECT-TYPE
			SYNTAX  INTEGER (0..2)
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A side
				1:Local
				2:Remote"
			::= { fae1dataEntry 3 }

		fE1DATACardHWVer OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card hardware version x.xxx"
			::= { fae1dataEntry 4 }

		fE1DATACardFWVer OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card firmware version x.xxx"
			::= { fae1dataEntry 5 }

		fE1DATACardCPLDVer OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card CPLD version x.xxx"
			::= { fae1dataEntry 6 }

		fE1DATACardFPGAVer OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card FPGA version x.xxx"
			::= { fae1dataEntry 7 }
			
		fE1DATAPortActive OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card active:
				1:Disable
				2:Enable"
			::= { fae1dataEntry 8 }

		fE1DATAPortReset OBJECT-TYPE
			SYNTAX  INTEGER {
						off(1),
						action(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card portreset:
				1:OFF
				2:Action"
			::= { fae1dataEntry 9 }

		fE1DATASettoDefault OBJECT-TYPE
			SYNTAX  INTEGER {
						off(1),
						action(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card set to default:
				1:OFF
				2:Action"
			::= { fae1dataEntry 10 }
			
		fE1DATASignal OBJECT-TYPE
			SYNTAX  INTEGER {
						signal-loss(1),
						normal(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card E1 signal status:
				1:Signal Loss
				2:Normal"
			::= { fae1dataEntry 11 }

		fE1DATASync OBJECT-TYPE
			SYNTAX  INTEGER {
						sync-loss(1),
						normal(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card E1 sync status:
				1:Sync Loss
				2:Normal"
			::= { fae1dataEntry 12 }
		
		fE1DATAReAis OBJECT-TYPE
			SYNTAX  INTEGER {
						no(1),
						have(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card E1 receive AIS:
                1:NO
				2:Have"
			::= { fae1dataEntry 13 }
		
		fE1DATAE1Alarm OBJECT-TYPE
			SYNTAX  INTEGER {
						no(1),
						have(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card E1 alarm:
                1:NO
				2:Have"
			::= { fae1dataEntry 14 }
		
		fE1DATALOMF OBJECT-TYPE
			SYNTAX  INTEGER {
						no(1),
						have(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card E1 loss of multiframe sync:
                1:NO
				2:Have"
			::= { fae1dataEntry 15 }
		
		fE1DATALinecodeViolation OBJECT-TYPE
			SYNTAX  INTEGER {
						no(1),
						have(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card E1 line code violation:
				1:NO
				2:Have"
			::= { fae1dataEntry 16 }
		
		fE1DATAConnector OBJECT-TYPE
			SYNTAX  INTEGER {
						bnc(1),
						rj-48c(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card connector type:
				1:BNC
				2:RJ-48C"
			::= { fae1dataEntry 17 }
				
		fE1DATARdSTS OBJECT-TYPE
			SYNTAX  INTEGER {
						on(1),
						off(2),
						flash(3)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card RD status:
				1:ON
				2:OFF
                3:Flash"
			::= { fae1dataEntry 18 }

		fE1DATATdSTS OBJECT-TYPE
			SYNTAX  INTEGER {
						on(1),
						off(2),
						flash(3)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card TD status:
				1:ON
				2:OFF
                3:Flash"
			::= { fae1dataEntry 19 }
        			
		 fE1DATARtsSTS OBJECT-TYPE
			SYNTAX  INTEGER {
						on(1),
						off(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card RTS status:
				1:On
				2:Off"
			::= { fae1dataEntry 20 }
    			
		 fE1DATACtsSTS OBJECT-TYPE
			SYNTAX  INTEGER {
						on(1),
						off(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card CTS status:
				1:On
				2:Off"
			::= { fae1dataEntry 21 }

		fE1DATADcdSTS OBJECT-TYPE
			SYNTAX  INTEGER {
						on(1),
						off(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card DCD status:
				1:On
				2:Off"
			::= { fae1dataEntry 22 }
				
		fE1DATADsrSTS OBJECT-TYPE
			SYNTAX  INTEGER {
						space(1),
						mark(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card DSR status:
				1:Space
				2:Mark"
			::= { fae1dataEntry 23 }

		fE1DATADtrSTS OBJECT-TYPE
			SYNTAX  INTEGER {
						space(1),
						mark(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card DTR status:
				1:Space
				2:Mark"
			::= { fae1dataEntry 24 }
			
		fE1DATARemoPwAb OBJECT-TYPE
			SYNTAX  INTEGER {
						normal(1),
						fail(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card remote power fail :
				1:Normal
				2:Fail"
			::= { fae1dataEntry 25 }

		fE1DATABertErr OBJECT-TYPE
			SYNTAX  INTEGER {
						no(1),
						have(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card bert error :
				1:No error
				2:Have error"
			::= { fae1dataEntry 26 }
			
		fE1DATACableAdaptedSTS OBJECT-TYPE
			SYNTAX  INTEGER {
						rs-530dte(4),
						rs-530dce(5),
						xdot21dte(6),
						xdot21dce(7),
						vdot35dte(8),
						vdot35dce(9),
						rs-449dte(10),
						rs-449dce(11),
						rs-232dte(12),
						rs-232dce(13),
						not-insert-cable(15)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card cable adapted status:
				4:RS-530 DTE
				5:RS-530 DCE
				6:X.21 DTE
				7:X.21 DCE
				8:V.35 DTE
				9:V.35 DCE
				10:RS-499 DTE
				11:RS-449 DCE
				12:RS-232 DTE
				13:RS-232 DCE
				15:Not insert cable"
			::= { fae1dataEntry 27 }

		fE1DATAFrame OBJECT-TYPE
			SYNTAX  INTEGER {
						unframed(1),
						framed(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card frame mode:
				1:Unframed
				2:Framed"
			::= { fae1dataEntry 28 }

		fE1DATATimeSlot1 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card timeslot1:
				1:Inactive
				2:Active"
			::= { fae1dataEntry 29 }
			
		fE1DATATimeSlot2 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card timeslot2:
				1:Inactive
				2:Active"
			::= { fae1dataEntry 30 }

		fE1DATATimeSlot3 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card timeslot3:
				1:Inactive
				2:Active"
			::= { fae1dataEntry 31 }
			
		fE1DATATimeSlot4 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card timeslot4:
				1:Inactive
				2:Active"
			::= { fae1dataEntry 32 }

		fE1DATATimeSlot5 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card timeslot5:
				1:Inactive
				2:Active"
			::= { fae1dataEntry 33 }
			
		fE1DATATimeSlot6 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card timeslot6:
				1:Inactive
				2:Active"
			::= { fae1dataEntry 34 }

       fE1DATATimeSlot7 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card timeslot7:
				1:Inactive
				2:Active"
			::= { fae1dataEntry 35 }

		fE1DATATimeSlot8 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card timeslot8:
				1:Inactive
				2:Active"
			::= { fae1dataEntry 36 }
			
		fE1DATATimeSlot9 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card timeslot9:
				1:Inactive
				2:Active"
			::= { fae1dataEntry 37 }

		fE1DATATimeSlot10 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card timeslot10:
				1:Inactive
				2:Active"
			::= { fae1dataEntry 38 }
				
		fE1DATATimeSlot11 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card timeslot11:
				1:Inactive
				2:Active"
			::= { fae1dataEntry 39 }

		fE1DATATimeSlot12 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card timeslot12:
				1:Inactive
				2:Active"
			::= { fae1dataEntry 40 }
			
		fE1DATATimeSlot13 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card timeslot13:
				1:Inactive
				2:Active"
			::= { fae1dataEntry 41 }
    
        fE1DATATimeSlot14 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card timeslot14:
				1:Inactive
				2:Active"
			::= { fae1dataEntry 42 }  
      	
		fE1DATATimeSlot15 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1 Series card timeslot15:
				1:Inactive
				2:Active"
			::= { fae1dataEntry 43 }

		fE1DATATimeSlot16 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1 Series card timeslot16:
				1:Inactive
				2:Active"
			::= { fae1dataEntry 44 }  
      	
		fE1DATATimeSlot17 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card timeslot17:
				1:Inactive
				2:Active"
			::= { fae1dataEntry 45 }
		
		fE1DATATimeSlot18 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card timeslot18:
				1:Inactive
				2:Active"
			::= { fae1dataEntry 46 }  
      	
		fE1DATATimeSlot19 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card timeslot19:
				1:Inactive
				2:Active"
			::= { fae1dataEntry 47 }

		fE1DATATimeSlot20 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card timeslot20:
				1:Inactive
				2:Active"
			::= { fae1dataEntry 48 }  
      	
		fE1DATATimeSlot21 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card timeslot21:
				1:Inactive
				2:Active"
			::= { fae1dataEntry 49 }
    
       fE1DATATimeSlot22 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card timeslot22:
				1:Inactive
				2:Active"
			::= { fae1dataEntry 50 }  
      	
		fE1DATATimeSlot23 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card timeslot23:
				1:Inactive
				2:Active"
			::= { fae1dataEntry 51 }
			
		fE1DATATimeSlot24 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card timeslot24:
				1:Inactive
				2:Active"
			::= { fae1dataEntry 52 }  
      	
		fE1DATATimeSlot25 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card timeslot25:
				1:Inactive
				2:Active"
			::= { fae1dataEntry 53 }
			
		fE1DATATimeSlot26 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card timeslot26:
				1:Inactive
				2:Active"
			::= { fae1dataEntry 54 }  
      	
		fE1DATATimeSlot27 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card timeslot27:
				1:Inactive
				2:Active"
			::= { fae1dataEntry 55 }
			
		fE1DATATimeSlot28 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card timeslot28:
				1:Inactive
				2:Active"
			::= { fae1dataEntry 56 }

		fE1DATATimeSlot29 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card timeslot29:
				1:Inactive
				2:Active"
			::= { fae1dataEntry 57 }

		fE1DATATimeSlot30 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card timeslot30:
				1:Inactive
				2:Active"
			::= { fae1dataEntry 58 }
      
     fE1DATATimeSlot31 OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card timeslot31:
				1:Inactive
				2:Active"
			::= { fae1dataEntry 59 }
     
     fE1DATATimeSource OBJECT-TYPE
			SYNTAX  INTEGER {
						recovery-from-e1(1),
						dataport(2),
						internal-oscillator(3),
						transparent(4)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card time souce:
				1:Recovery from E1
				2:Data port
				3:Internal oscillator
				4:Transparent"
			::= { fae1dataEntry 60 }
      
       fE1DATARcPolarity OBJECT-TYPE
			SYNTAX  INTEGER {
						normal(1),
						invert(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card RC polarity:
				1:Normal
				2:Invert"
			::= { fae1dataEntry 61 }
			
		fE1DATATcPolarity OBJECT-TYPE
			SYNTAX  INTEGER {
						normal(1),
						invert(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card TC polarity:
				1:Normal
				2:Invert"
			::= { fae1dataEntry 62 }
			
		fE1DATAEtcPolarity OBJECT-TYPE
			SYNTAX  INTEGER {
						normal(1),
						invert(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card ETC polarity:
				1:Normal
				2:Invert"
			::= { fae1dataEntry 63 }
	
	  fE1DATALinecode OBJECT-TYPE
			SYNTAX  INTEGER {
						hdb3(1),
						ami(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card line code:
				1:HDB3
				2:AMI"
			::= { fae1dataEntry 64 }
			
		fE1DATAFramer OBJECT-TYPE
			SYNTAX  INTEGER {
						ccs(1),
						cas(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card framer mode:
				1:CCS
				2:CAS"
			::= { fae1dataEntry 65 }
			
		fE1DATAAis OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card AIS:
				1:Disable
				2:Enable"
			::= { fae1dataEntry 66 }
			
		fE1DATADataPortType OBJECT-TYPE
			SYNTAX  INTEGER {
						cable-adapted(1),
						vdot35(2),
						rs-530(3),
						xdot21(4),
						rs-232(5),
						rs-449(6)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card Data port type:
				1:Cable adapted
				2:V.35
				3:RS 530
				4:X.21
				5:RS 232
				6:RS 449"
			::= { fae1dataEntry 67 }
			
		fE1DATADteDce OBJECT-TYPE
			SYNTAX  INTEGER {
						dce(1),
						dte(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card DCE/DTE mode:
				1:DCE
				2:DTE"
			::= { fae1dataEntry 68 }
    	
	   fE1DATADataPortService OBJECT-TYPE
			SYNTAX  INTEGER {
						enable(1),
						disable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card Data port service:
				1:Enable
				2:Disalbe"
			::= { fae1dataEntry 69 }
			
		fE1DATALbsetting OBJECT-TYPE
			SYNTAX  INTEGER {
						off(1),
						llb(2),
						rlb(3),
						rrlb(4)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card Loop back test:
				1:Off
				2:LLB
				3:RLB
				4:RRLB"
			::= { fae1dataEntry 70 }
			
		fE1DATALbsettingSel OBJECT-TYPE
			SYNTAX  INTEGER {
						e1-side(1),
						dataport-side(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card Loop back select:
				1:E1 side
				2:Data port side"
			::= { fae1dataEntry 71 }
			
		fE1DATABert OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series card bert mode:
				1:Disable
				2:Enable"
			::= { fae1dataEntry 72 }
			
		fE1DATAUnusedTimeslot OBJECT-TYPE
			SYNTAX  INTEGER {
						ox7e(1),
						oxff(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series unsued time slot:
				1:0X7E
				2:0XFF"
			::= { fae1dataEntry 73 }
			
		fE1DATACtsRts OBJECT-TYPE
			SYNTAX  INTEGER {
						follows-rts-cts(1),
						constantly-on(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series :
				1:Follows RTS/CTS
				2:Constantly on"
			::= { fae1dataEntry 74 }
			
		fE1DATADsrDtr OBJECT-TYPE
			SYNTAX  INTEGER {
						follows-dsr-dtr(1),
						constantly-on(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series unsued time slot:
				1:Follows DSR/DTR
				2:Constantly on"
			::= { fae1dataEntry 75 }
			
		fE1DATATestSTS OBJECT-TYPE
			SYNTAX  INTEGER {
						normal(1),
						in-test(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series test status:
				1:Normal
				2:In test"
			::= { fae1dataEntry 76 }
			
		fE1DATADataportLLB OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA Series Dataport LLB Mode:
				1:Disable
				2:Enable"
			::= { fae1dataEntry 77 }
			
		fE1DATARate OBJECT-TYPE
			SYNTAX      INTEGER
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-E1DATA rate"
			::= { fae1dataEntry 78 }


-- 1000EAS/X Series
fa1000easxProject OBJECT IDENTIFIER ::= { faGswSnmp 4300 }
    
fa1000easxCards  OBJECT IDENTIFIER ::= { fa1000easxProject 1 }
         
	fa1000easxTable OBJECT-TYPE
		SYNTAX      SEQUENCE OF Fa1000easxEntry
		MAX-ACCESS  not-accessible
		STATUS      current
		DESCRIPTION
				"A list of  FRM220A-1000EAS/X series card entries.
				The number of entries is fa1000easx-No-L."
		::= { fa1000easxCards 1 }

	fa1000easxEntry OBJECT-TYPE
		SYNTAX      Fa1000easxEntry
		MAX-ACCESS  not-accessible
		STATUS      current
		DESCRIPTION
				"An entry containing management information applicable
				to a particular  FRM220A-1000EAS/X series card."
		INDEX   { fa1000easxChassisIndex, fa1000easxSlotIndex, fa1000easxSideIndex }
		::= {  fa1000easxTable 1 } 

	Fa1000easxEntry ::=
		SEQUENCE {  
				  fa1000easxChassisIndex	      INTEGER,
				  fa1000easxSlotIndex		      INTEGER,
				  fa1000easxSideIndex		      INTEGER,
				  fa1000easxCardHWVer		      DisplayString,
				  fa1000easxCardFWVer		      DisplayString,
				  fa1000easxCardCPLDVer	      	  DisplayString,
				  fa1000easxCardFPGAVer	      	  DisplayString,
				  fa1000easxX1Link		      	  INTEGER,
				  fa1000easxX2Link		      	  INTEGER,
				  fa1000easxX1SysLoop		      INTEGER,
				  fa1000easxX2SysLoop		      INTEGER,
				  fa1000easxX1LBKTest			  INTEGER,
				  fa1000easxX2LBKTest			  INTEGER,
				  fa1000easxX1LBKTestResult		  INTEGER,
				  fa1000easxX2LBKTestResult		  INTEGER,
				  fa1000easxX1Pwr				  INTEGER,
				  fa1000easxX2Pwr				  INTEGER,
				  fa1000easxX1DD		          INTEGER,
				  fa1000easxX2DD		          INTEGER,
				  fa1000easxU3Link		      	  INTEGER,				  
				  fa1000easxU4Link		      	  INTEGER,
				  fa1000easxU3Negotiation		  INTEGER,				  
				  fa1000easxU4Negotiation		  INTEGER,
				  fa1000easxU3Speed		      	  INTEGER,				  
				  fa1000easxU4Speed		      	  INTEGER,
				  fa1000easxU3Duplex		      INTEGER,				  
				  fa1000easxU4Duplex		      INTEGER,
				  fa1000easxX1IRL			      DisplayString,
				  fa1000easxX2IRL			      DisplayString,
				  fa1000easxU3IRL			      DisplayString,
				  fa1000easxU4IRL			      DisplayString,
				  fa1000easxX1ERL			      DisplayString,
				  fa1000easxX2ERL			      DisplayString,
				  fa1000easxU3ERL			      DisplayString,
				  fa1000easxU4ERL			      DisplayString,
				  fa1000easxDeviceActive		  INTEGER,
				  fa1000easxDeviceReset			  INTEGER, 
				  fa1000easxX1Active			  INTEGER, 
				  fa1000easxX2Active			  INTEGER,
				  fa1000easxU3Active			  INTEGER, 
				  fa1000easxU4Active			  INTEGER,
				  fa1000easxFHR					  INTEGER,
				  fa1000easxOAMChA				  INTEGER,
				  fa1000easxOAMChB				  INTEGER,
				  fa1000easxPortVLAN			  INTEGER,
				  fa1000easxX1ALS				  INTEGER, 
				  fa1000easxX2ALS				  INTEGER,
 				  fa1000easxPauseFrame			  INTEGER,
 				  fa1000easxClrRMONCnt			  INTEGER,
  				  fa1000easxClrOAMCnt			  INTEGER,
 				  fa1000easxFHRChA				  INTEGER,
 				  fa1000easxFHRChB				  INTEGER,
  				  fa1000easxIPMode				  INTEGER,
   				  fa1000easxX1InfoRom1			  INTEGER,
  				  fa1000easxX1InfoRom2			  INTEGER,
    			  fa1000easxX2InfoRom1			  INTEGER,
   				  fa1000easxX2InfoRom2			  INTEGER,
  				  fa1000easxMaxOAM				  Counter32,
  				  fa1000easxX1LLFLogic			  INTEGER,
  				  fa1000easxX1LLFPort2			  INTEGER,
  				  fa1000easxX1LLFPort3			  INTEGER,
  				  fa1000easxX1LLFPort4			  INTEGER,
   				  fa1000easxX2LLFLogic			  INTEGER,
   				  fa1000easxX2LLFPort1			  INTEGER,
   				  fa1000easxX2LLFPort3			  INTEGER,
   				  fa1000easxX2LLFPort4			  INTEGER,
  				  fa1000easxU3LLFLogic			  INTEGER,
  				  fa1000easxU3LLFPort1			  INTEGER,
  				  fa1000easxU3LLFPort2			  INTEGER,
    			  fa1000easxU4LLFLogic			  INTEGER,
    			  fa1000easxU4LLFPort1			  INTEGER,
    			  fa1000easxU4LLFPort2			  INTEGER,
   				  fa1000easxX1VLANSts			  INTEGER,
  				  fa1000easxX2VLANSts			  INTEGER,
  				  fa1000easxU3VLANSts			  INTEGER,
  				  fa1000easxU4VLANSts			  INTEGER,
  				  fa1000easxU5VLANSts			  INTEGER,
  				  fa1000easxCPUPortSts			  INTEGER,
   				  fa1000easxSWFeatures			  INTEGER,
  				  fa1000easxX1LinkUp			  INTEGER,
    			  fa1000easxX1LinkDown			  INTEGER,
   				  fa1000easxRemoteAPwrUp		  INTEGER,
  				  fa1000easxRemoteAPwrDown		  INTEGER,
   				  fa1000easxRemoteALBKUp		  INTEGER,
  				  fa1000easxRemoteALBKDown		  INTEGER,
  				  fa1000easxX2LinkUp			  INTEGER,
    			  fa1000easxX2LinkDown			  INTEGER,
   				  fa1000easxRemoteBPwrUp		  INTEGER,
  				  fa1000easxRemoteBPwrDown		  INTEGER,
   				  fa1000easxRemoteBLBKUp		  INTEGER,
  				  fa1000easxRemoteBLBKDown		  INTEGER,
  				  fa1000easxU3LinkUp			  INTEGER,  
  				  fa1000easxU4LinkUp			  INTEGER,
  				  fa1000easxU3LinkDown			  INTEGER,
    			  fa1000easxU4LinkDown			  INTEGER,
				  fa1000easxMAC					  INTEGER,
				  fa1000easxTLPT				  INTEGER,
				  fa1000easxX1Speed				  INTEGER,
				  fa1000easxX2Speed				  INTEGER,
				  fa1000easxU3SpeedStatus		  INTEGER,
				  fa1000easxU4SpeedStatus		  INTEGER,
				  fa1000easxU3DuplexStatus		  INTEGER,
				  fa1000easxU4DuplexStatus		  INTEGER,
				  fa1000easxSetToDefault		  INTEGER,
				  fa1000easxRMONX1In		      DisplayString,
				  fa1000easxRMONX2In		      DisplayString,
				  fa1000easxRMONU3In		      DisplayString,
				  fa1000easxRMONU4In		      DisplayString,
				  fa1000easxRMONX1Out		      DisplayString,
				  fa1000easxRMONX2Out		      DisplayString,
				  fa1000easxRMONU3Out		      DisplayString,
				  fa1000easxRMONU4Out		      DisplayString,
				  fa1000easxChAOamCntTx			  Counter32,
				  fa1000easxChAOamCntRx			  Counter32,
				  fa1000easxChAOamCntTxInfo		  Counter32,
				  fa1000easxChAOamCntRxInfo		  Counter32,
				  fa1000easxChAOamCntTxEvent	  Counter32,
				  fa1000easxChAOamCntRxUniEvent	  Counter32,
				  fa1000easxChAOamCntRxDupEvent	  Counter32,
				  fa1000easxChAOamCntTxLp		  Counter32,
				  fa1000easxChAOamCntRxLp		  Counter32,
				  fa1000easxChAOamCntTxVarReq	  Counter32,
				  fa1000easxChAOamCntRxVarReq	  Counter32,
				  fa1000easxChAOamCntTxVarRsp	  Counter32,
				  fa1000easxChAOamCntRxVarRsp	  Counter32,
				  fa1000easxChAOamCntTxOui	      Counter32,
				  fa1000easxChAOamCntRxOui  	  Counter32,
				  fa1000easxChAOamCntUnknown	  Counter32,
				  fa1000easxChBOamCntTx			  Counter32,
				  fa1000easxChBOamCntRx			  Counter32,
				  fa1000easxChBOamCntTxInfo		  Counter32,
				  fa1000easxChBOamCntRxInfo		  Counter32,
				  fa1000easxChBOamCntTxEvent	  Counter32,
				  fa1000easxChBOamCntRxUniEvent	  Counter32,
				  fa1000easxChBOamCntRxDupEvent	  Counter32,
				  fa1000easxChBOamCntTxLp		  Counter32,
				  fa1000easxChBOamCntRxLp		  Counter32,
				  fa1000easxChBOamCntTxVarReq	  Counter32,
				  fa1000easxChBOamCntRxVarReq	  Counter32,
				  fa1000easxChBOamCntTxVarRsp	  Counter32,
				  fa1000easxChBOamCntRxVarRsp	  Counter32,
				  fa1000easxChBOamCntTxOui	      Counter32,
				  fa1000easxChBOamCntRxOui  	  Counter32,
				  fa1000easxChBOamCntUnknown	  Counter32,
				  fa1000easxX1VendorName		  DisplayString,
				  fa1000easxX1VendorPartNo		  DisplayString,
				  fa1000easxX1TxWaveLength		  Counter32,
				  fa1000easxX1RxWaveLength		  Counter32,
				  fa1000easxX1LinkLength		  Counter32,
				  fa1000easxX1FiberType			  INTEGER,
				  fa1000easxX1LengthUnit		  INTEGER,
				  fa1000easxX1DDStatus			  INTEGER,
				  fa1000easxX1TxPwr				  INTEGER,
				  fa1000easxX1RxPwr				  INTEGER,
				  fa1000easxX1RxSens			  INTEGER,
				  fa1000easxX1Temp				  INTEGER,		  
				  fa1000easxX2VendorName		  DisplayString,
				  fa1000easxX2VendorPartNo		  DisplayString,
				  fa1000easxX2TxWaveLength		  Counter32,
				  fa1000easxX2RxWaveLength		  Counter32,
				  fa1000easxX2LinkLength		  Counter32,
				  fa1000easxX2FiberType			  INTEGER,
				  fa1000easxX2LengthUnit		  INTEGER,
				  fa1000easxX2DDStatus			  INTEGER,
				  fa1000easxX2TxPwr				  INTEGER,
				  fa1000easxX2RxPwr				  INTEGER,
				  fa1000easxX2RxSens			  INTEGER,
				  fa1000easxX2Temp				  INTEGER,
				  fa1000easxIpAddr		  		  DisplayString,
				  fa1000easxNetmask		  		  DisplayString,
				  fa1000easxGateway		  		  DisplayString,
				  fa1000easxRedundancyMode		  INTEGER,
				  fa1000easxThreshold			  INTEGER,
				  fa1000easxSensitivity			  INTEGER,
				  fa1000easxX1DefPortCoS		  INTEGER,
				  fa1000easxX2DefPortCoS		  INTEGER,
				  fa1000easxU3DefPortCoS		  INTEGER,
				  fa1000easxU4DefPortCoS		  INTEGER,
				  fa1000easxU5DefPortCoS		  INTEGER,
				  fa1000easxTagCoS0				  INTEGER,
				  fa1000easxTagCoS1				  INTEGER,
				  fa1000easxTagCoS2				  INTEGER,
				  fa1000easxTagCoS3				  INTEGER,
				  fa1000easxTagCoS4				  INTEGER,
				  fa1000easxTagCoS5				  INTEGER,
				  fa1000easxTagCoS6				  INTEGER,
				  fa1000easxTagCoS7				  INTEGER
	                          
	}
	
       fa1000easxChassisIndex OBJECT-TYPE
			SYNTAX  INTEGER (0..9)
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"A unique value for each  card. 
				It is the slot location number."
			::= { fa1000easxEntry 1 }

		fa1000easxSlotIndex OBJECT-TYPE
			SYNTAX  INTEGER (1..20)
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"A unique value for each  card. 
				It is the slot location number."
			::= { fa1000easxEntry 2 }  
			
		fa1000easxSideIndex OBJECT-TYPE
			SYNTAX  INTEGER (0..2)
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A side
				1:Local
				2:Remote"
			::= { fa1000easxEntry 3 }

		fa1000easxCardHWVer OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card hardware version x.xxx"
			::= { fa1000easxEntry 4 }

		fa1000easxCardFWVer OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card firmware version x.xxx"
			::= { fa1000easxEntry 5 }

		fa1000easxCardCPLDVer OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card CPLD version x.xxx"
			::= { fa1000easxEntry 6 }

		fa1000easxCardFPGAVer OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card FPGA version x.xxx"
			::= { fa1000easxEntry 7 }
			
		fa1000easxX1Link OBJECT-TYPE
			SYNTAX  INTEGER {
						down(1),
						up(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, linking status of the fiber port2
				1:down
				2:up"
			::= { fa1000easxEntry 8 }
			
		fa1000easxX2Link OBJECT-TYPE
			SYNTAX  INTEGER {
						down(1),
						up(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, linking status of the fiber port2
				1:down
				2:up"
			::= { fa1000easxEntry 9 }

			
		fa1000easxX1SysLoop OBJECT-TYPE
			SYNTAX  INTEGER {
						off(1),
						on(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, system looped status of the fiber port2
				1:off
				2:on"
			::= { fa1000easxEntry 10 }
			
		fa1000easxX2SysLoop OBJECT-TYPE
			SYNTAX  INTEGER {
						off(1),
						on(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, system looped status of the fiber port2
				1:off
				2:on"
			::= { fa1000easxEntry 11 }


		fa1000easxX1LBKTest OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, remote loop back testing of the fiber port2
				1:disable
				2:enable"
			::= { fa1000easxEntry 12 }
			
		fa1000easxX2LBKTest OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, remote loop back testing of the fiber port2
				1:disable
				2:enable"
			::= { fa1000easxEntry 13 }
			
		fa1000easxX1LBKTestResult OBJECT-TYPE
			SYNTAX  INTEGER {
						ok(1),
						fail(2),
						off(3)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, remote loop back test result of the fiber port2.
				  It means off(3) when fa1000easxX1LBKTest status is disabled, otherwise it means ok.  
				1:ok
				2:fail
				3:off"

			::= { fa1000easxEntry 14 }
			
		fa1000easxX2LBKTestResult OBJECT-TYPE
			SYNTAX  INTEGER {
						ok(1),
						fail(2),
						off(3)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, remote loop back test result of the fiber port2.
				  It means off(3) when fa1000easxX2LBKTest status is disabled, otherwise it means ok.  
				1:ok
				2:fail
				3:off"
			::= { fa1000easxEntry 15 }

			
		fa1000easxX1Pwr OBJECT-TYPE
			SYNTAX  INTEGER {
						abnormal(1),
						ok(2),
						none(3)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, remote power status of the fiber port2.
				  It means none(3) if there is no remote device, otherwise it means abnormal.
				1:abnormal
				2:ok
				3:none"
			::= { fa1000easxEntry 16 }
			
		fa1000easxX2Pwr OBJECT-TYPE
			SYNTAX  INTEGER {
						abnormal(1),
						ok(2),
						none(3)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, remote power status of the fiber port2.
				  It means none(3) if there is no remote device, otherwise it means abnormal.
				1:abnormal
				2:ok
				3:none"
			::= { fa1000easxEntry 17 }


		fa1000easxX1DD OBJECT-TYPE
			SYNTAX  INTEGER {
						no(1),
						yes(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, D/D function of the fiber port2
				1:no
				2:yes"
			::= { fa1000easxEntry 18 }
			
		fa1000easxX2DD OBJECT-TYPE
			SYNTAX  INTEGER {
						no(1),
						yes(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, D/D function of the fiber port2
				1:no
				2:yes"
			::= { fa1000easxEntry 19 }
	
		fa1000easxU3Link OBJECT-TYPE
			SYNTAX  INTEGER {
						down(1),
						up(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, linking status of the utp port3
				1:up
				2:down"
			::= { fa1000easxEntry 20 }

		fa1000easxU4Link OBJECT-TYPE
			SYNTAX  INTEGER {
						down(1),
						up(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, linking status of the utp port4
				1:up
				2:down"
			::= { fa1000easxEntry 21 }
			
		fa1000easxU3Negotiation OBJECT-TYPE
			SYNTAX  INTEGER {
						manaual(1),
						auto(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, negotiation status of the utp port3
				1:manaual
				2:auto"
			::= { fa1000easxEntry 22 } 
			
		fa1000easxU4Negotiation OBJECT-TYPE
			SYNTAX  INTEGER {
						manaual(1),
						auto(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, negotiation status of the utp port4
				1:manaual
				2:auto"
			::= { fa1000easxEntry 23 }
			
		fa1000easxU3Speed OBJECT-TYPE
			SYNTAX  INTEGER {
						f10BaseT(1),
						f100BaseTX(2),
						f1000BaseTX(3)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, speed status of the utp port3
				1:10Base-T(1)
				2:100Base-TX(2)
				3:1000Base-TX(3)"
			::= { fa1000easxEntry 24 }

		fa1000easxU4Speed OBJECT-TYPE
			SYNTAX  INTEGER {
						f10BaseT(1),
						f100BaseTX(2),
						f1000BaseTX(3)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, speed status of the utp port4
				1:10Base-T(1)
				2:100Base-TX(2)
				3:1000Base-TX(3)"
			::= { fa1000easxEntry 25 }

		fa1000easxU3Duplex OBJECT-TYPE
			SYNTAX  INTEGER {
						half(1),
						full(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, duplex status of the utp port3
				1:half
				2:full"
			::= { fa1000easxEntry 26 }

		fa1000easxU4Duplex OBJECT-TYPE
			SYNTAX  INTEGER {
						half(1),
						full(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, duplex status of the utp port4
				1:half
				2:full"
			::= { fa1000easxEntry 27 }
			
		fa1000easxX1IRL OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "FRM220A-1000EAS/X Series card, 1 Ingress Rate Limit:                 
                 0 = Unlimit
                 input format: 64k(K),100m(M),100
                 If doesn't input the unit, the default was Mega.            
                 Limite Rate : 64K ~ 990M
                "
			::= { fa1000easxEntry 28 }

		fa1000easxX2IRL OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "FRM220A-1000EAS/X Series card, 2 Ingress Rate Limit:                 
                 0 = Unlimit
                 input format: 64k(K),100m(M),100
                 If doesn't input the unit, the default was Mega.            
                 Limite Rate : 64K ~ 990M
                "
			::= { fa1000easxEntry 29 }

		fa1000easxU3IRL OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "FRM220A-1000EAS/X Series card, utp 3 Ingress Rate Limit:                 
                 0 = Unlimit
                 input format: 64k(K),100m(M),100
                 If doesn't input the unit, the default was Mega.            
                 Limite Rate : 64K ~ 990M
                "
			::= { fa1000easxEntry 30 }

		fa1000easxU4IRL OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "FRM220A-1000EAS/X Series card, utp 4 Ingress Rate Limit:                 
                 0 = Unlimit
                 input format: 64k(K),100m(M),100
                 If doesn't input the unit, the default was Mega.            
                 Limite Rate : 64K ~ 990M
                "
			::= { fa1000easxEntry 31 }

		fa1000easxX1ERL OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "FRM220A-1000EAS/X Series card, fiber 1 Egress Rate Limit:                 
                 0 = Unlimit
                 input format: 64k(K),100m(M),100
                 If doesn't input the unit, the default was Mega.            
                 Limite Rate : 64K ~ 990M
                "
			::= { fa1000easxEntry 32 }

		fa1000easxX2ERL OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "FRM220A-1000EAS/X Series card, fiber 2 Egress Rate Limit:                 
                 0 = Unlimit
                 input format: 64k(K),100m(M),100
                 If doesn't input the unit, the default was Mega.            
                 Limite Rate : 64K ~ 990M
                "
			::= { fa1000easxEntry 33 }

		fa1000easxU3ERL OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "FRM220A-1000EAS/X Series card, utp 3 Egress Rate Limit:                 
                 0 = Unlimit
                 input format: 64k(K),100m(M),100
                 If doesn't input the unit, the default was Mega.            
                 Limite Rate : 64K ~ 990M
                "
			::= { fa1000easxEntry 34 }

		fa1000easxU4ERL OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "FRM220A-1000EAS/X Series card, utp 4 Egress Rate Limit:                 
                 0 = Unlimit
                 input format: 64k(K),100m(M),100
                 If doesn't input the unit, the default was Mega.            
                 Limite Rate : 64K ~ 990M
                "
			::= { fa1000easxEntry 35 } 
			
		fa1000easxDeviceActive OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, device active status
				1:disable
				2:enable"
			::= { fa1000easxEntry 36 }

		fa1000easxDeviceReset OBJECT-TYPE
			SYNTAX  INTEGER {
						noaction(1),
						action(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, device reset(trigger)
				1:no action
				2:action"
			::= { fa1000easxEntry 37 }

 		fa1000easxX1Active OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port 1 active status
				1:disable
				2:enable"
			::= { fa1000easxEntry 38 }
                                      
 		fa1000easxX2Active OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port 2 active status
				1:disable
				2:enable"
			::= { fa1000easxEntry 39 }

 		fa1000easxU3Active OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, utp port 3 active status
				1:disable
				2:enable"
			::= { fa1000easxEntry 40 }

 		fa1000easxU4Active OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port 4 active status
				1:disable
				2:enable"
			::= { fa1000easxEntry 41 }
                             
 		fa1000easxFHR OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, accept remote H/W reset(FHR)
				1:disable
				2:enable"
			::= { fa1000easxEntry 42 }			  

 		fa1000easxOAMChA OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						passive(2),
						active(3)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, 802.3 OAM channel B mode
				1:disable
				2:passive
				3:active"
			::= { fa1000easxEntry 43 }

 		fa1000easxOAMChB OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						passive(2),
						active(3)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, 802.3 OAM channel B mode
				1:disable
				2:passive
				3:active"
			::= { fa1000easxEntry 44 }
			
 		fa1000easxPortVLAN OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, port VLAN(Port1 ~ Port5)
				1:disable
				2:enable"
			::= { fa1000easxEntry 45 }
			
 		fa1000easxX1ALS OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, port 1 ALS(Auto Laser Shutdown)
				1:disable
				2:enable"
			::= { fa1000easxEntry 46 }

 		fa1000easxX2ALS OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, port 2 ALS(Auto Laser Shutdown)
				1:disable
				2:enable"
			::= { fa1000easxEntry 47 }

 		fa1000easxPauseFrame OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, puase frame
				1:disable
				2:enable"
			::= { fa1000easxEntry 48 }

 		fa1000easxClrRMONCnt OBJECT-TYPE
			SYNTAX  INTEGER {
						noaction(1),
						action(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, clear RMON IN/OUT counter(trigger)
				1:no action
				2:action"
			::= { fa1000easxEntry 49 }

 		fa1000easxClrOAMCnt OBJECT-TYPE
			SYNTAX  INTEGER {
						noaction(1),
						action(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, clear OAM counter(trigger)
				1:no action
				2:action"
			::= { fa1000easxEntry 50 }

 		fa1000easxFHRChA OBJECT-TYPE
			SYNTAX  INTEGER {
						noaction(1),
						action(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, send FHR to channel B remote device(trigger)
				1:no action
				2:action"
			::= { fa1000easxEntry 51 }

 		fa1000easxFHRChB OBJECT-TYPE
			SYNTAX  INTEGER {
						noaction(1),
						action(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, send FHR to channel B remote device(trigger)
				1:no action
				2:action"
			::= { fa1000easxEntry 52 }

 		fa1000easxIPMode OBJECT-TYPE
			SYNTAX  INTEGER {
						withIP(1),
						withoutIP(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, on rack, IP mode
				1:with IP
				2:without IP"
			::= { fa1000easxEntry 53 }
												
 		fa1000easxX1InfoRom1 OBJECT-TYPE
			SYNTAX  INTEGER {
						invalid(1),
						valid(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port 1 INFO-ROM information 1 valid
				1:invalid
				2:valid"
			::= { fa1000easxEntry 54 } 
 
  		fa1000easxX1InfoRom2 OBJECT-TYPE
			SYNTAX  INTEGER {
						invalid(1),
						valid(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port 1 INFO-ROM information 2 valid
				1:invalid
				2:valid"
			::= { fa1000easxEntry 55 }
			
 		fa1000easxX2InfoRom1 OBJECT-TYPE
			SYNTAX  INTEGER {
						invalid(1),
						valid(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port 2 INFO-ROM information 1 valid
				1:invalid
				2:valid"
			::= { fa1000easxEntry 56 } 
 
  		fa1000easxX2InfoRom2 OBJECT-TYPE
			SYNTAX  INTEGER {
						invalid(1),
						valid(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port 2 INFO-ROM information 2 valid
				1:invalid
				2:valid"
			::= { fa1000easxEntry 57 }
			  		
         fa1000easxMaxOAM  OBJECT-TYPE
            SYNTAX  Counter32
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                " FRM220A-1000EAS/X Series card, OAM max OAMPDUs size"
            ::= { fa1000easxEntry 58 }
            
		fa1000easxX1LLFLogic OBJECT-TYPE
			SYNTAX  INTEGER {
						and(1),
						or(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port 1 Link Loss Forwarding 
				depends boolean logic:
				1:and
				2:or"
			::= { fa1000easxEntry 59 }
						
		fa1000easxX1LLFPort2 OBJECT-TYPE
			SYNTAX  INTEGER {
						dont-care(1),
						selected(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port 1 Link Loss Forwarding 
				depends on port 2 fiber rx link:
				1:don't care
				2:selected"
			::= { fa1000easxEntry 60 }
		
		fa1000easxX1LLFPort3 OBJECT-TYPE
			SYNTAX  INTEGER {
						dont-care(1),
						selected(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port 1 Link Loss Forwarding 
				depends on port 3 ethernet rx link:
				1:don't care
				2:selected"
			::= { fa1000easxEntry 61 }

		
		fa1000easxX1LLFPort4 OBJECT-TYPE
			SYNTAX  INTEGER {
						dont-care(1),
						selected(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port 1 Link Loss Forwarding 
				depends on port 4 ethernet rx link:
				1:don't care
				2:selected"
			::= { fa1000easxEntry 62 }

		fa1000easxX2LLFLogic OBJECT-TYPE
			SYNTAX  INTEGER {
						and(1),
						or(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port 2 Link Loss Forwarding 
				depends boolean logic:
				1:and
				2:or"
			::= { fa1000easxEntry 63 }
						
		fa1000easxX2LLFPort1 OBJECT-TYPE
			SYNTAX  INTEGER {
						dont-care(1),
						selected(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port 2 Link Loss Forwarding 
				depends on port 1 fiber rx link:
				1:don't care
				2:selected"
			::= { fa1000easxEntry 64 }
		
		fa1000easxX2LLFPort3 OBJECT-TYPE
			SYNTAX  INTEGER {
						dont-care(1),
						selected(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port 2 Link Loss Forwarding 
				depends on port 3 ethernet rx link:
				1:don't care
				2:selected"
			::= { fa1000easxEntry 65 }
		
		fa1000easxX2LLFPort4 OBJECT-TYPE
			SYNTAX  INTEGER {
						dont-care(1),
						selected(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port 2 Link Loss Forwarding 
				depends on port 4 ethernet rx link:
				1:don't care
				2:selected"
			::= { fa1000easxEntry 66 }				

		fa1000easxU3LLFLogic OBJECT-TYPE
			SYNTAX  INTEGER {
						and(1),
						or(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, ethernet port 3 Link Loss Forwarding 
				depends boolean logic:
				1:and
				2:or"
			::= { fa1000easxEntry 67 }
						
		fa1000easxU3LLFPort1 OBJECT-TYPE
			SYNTAX  INTEGER {
						dont-care(1),
						selected(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, ethernet port 3 Link Loss Forwarding 
				depends on port 1 fiber rx link:
				1:don't care
				2:selected"
			::= { fa1000easxEntry 68 }			

		fa1000easxU3LLFPort2 OBJECT-TYPE
			SYNTAX  INTEGER {
						dont-care(1),
						selected(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, ethernet port 3 Link Loss Forwarding 
				depends on port 2 fiber rx link:
				1:don't care
				2:selected"
			::= { fa1000easxEntry 69 }

		fa1000easxU4LLFLogic OBJECT-TYPE
			SYNTAX  INTEGER {
						and(1),
						or(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, ethernet port 3 Link Loss Forwarding 
				depends boolean logic:
				1:and
				2:or"
			::= { fa1000easxEntry 70 }
						
		fa1000easxU4LLFPort1 OBJECT-TYPE
			SYNTAX  INTEGER {
						dont-care(1),
						selected(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, ethernet port 4 Link Loss Forwarding 
				depends on port 1 fiber rx link:
				1:don't care
				2:selected"
			::= { fa1000easxEntry 71 }			

		fa1000easxU4LLFPort2 OBJECT-TYPE
			SYNTAX  INTEGER {
						dont-care(1),
						selected(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, ethernet port 4 Link Loss Forwarding 
				depends on port 2 fiber rx link:
				1:don't care
				2:selected"
			::= { fa1000easxEntry 72 }
			
		fa1000easxX1VLANSts OBJECT-TYPE
			SYNTAX  INTEGER {
						groupA(1),
						groupB(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port 1 vlan status
				1:group A
				2:group B"
			::= { fa1000easxEntry 73 }
			
		fa1000easxX2VLANSts OBJECT-TYPE
			SYNTAX  INTEGER {
						groupA(1),
						groupB(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port 2 vlan status
				1:group A
				2:group B"
			::= { fa1000easxEntry 74 }

		fa1000easxU3VLANSts OBJECT-TYPE
			SYNTAX  INTEGER {
						groupA(1),
						groupB(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, ehernet port 3 vlan status
				1:group A
				2:group B"
			::= { fa1000easxEntry 75 }   
			
		fa1000easxU4VLANSts OBJECT-TYPE
			SYNTAX  INTEGER {
						groupA(1),
						groupB(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, ehernet port 4 vlan status
				1:group A
				2:group B"
			::= { fa1000easxEntry 76 }
			
		fa1000easxU5VLANSts OBJECT-TYPE
			SYNTAX  INTEGER {
						groupA(1),
						groupB(2),
						groupAB(3)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, ehernet port 5 vlan status
				1:group A
				2:group B
				3:group A+B"

			::= { fa1000easxEntry 77 }

		fa1000easxCPUPortSts OBJECT-TYPE
			SYNTAX  INTEGER {
						groupA(1),
						groupB(2),
						groupAB(3)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, CPU port status
				1:group A
				2:group B
				3:group A+B"
			::= { fa1000easxEntry 78 }

		fa1000easxSWFeatures OBJECT-TYPE
			SYNTAX  INTEGER {
						normal(1),
						port-trunk-2G(2),
						port-trunk-mirror(3),
						q-in-q-vlan(4),
						port-redundancy(5),
						dot1Q-vlan(6),
						stp(7),
						dot1Q-vlan-trunk(8),
						dot1Q-vlan-port-redundancy(9),
						q-in-q-vlan-port-redundancy(10),
						stp-dot1Q-vlan(11)	
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, switch advance functions mode
		         1:Normal
		         2:Port 1&2 trunk bandwidth 2G
		         3:Port 1&2 Mirror
		         4:Q-in-Q VLAN
		         5:Port 1&2 Redundancy
		         6:Static 802.1Q VLAN
		         7:Spanning Tree protocol
		         8:Static 802.1Q VLAN Trunk
		         9:Static 802.1Q VLAN and Port 1/2 Redundancy
		         10:Q-in-Q VLAN & Port 1/2 Redundancy
		         11:STP & Static 802.1Q VLAN"
		         
			::= { fa1000easxEntry 79 }
			
		fa1000easxX1LinkUp OBJECT-TYPE
			SYNTAX  INTEGER {
						normal(1),
						event(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber 1 link up event
				1:normal
				2:event"
			::= { fa1000easxEntry 80 }

		fa1000easxX1LinkDown OBJECT-TYPE
			SYNTAX  INTEGER {
						normal(1),
						event(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber 1 link down event
				1:normal
				2:event"
			::= { fa1000easxEntry 81 }

		fa1000easxRemoteAPwrUp OBJECT-TYPE
			SYNTAX  INTEGER {
						normal(1),
						event(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, remote A power up event
				1:normal
				2:event"
			::= { fa1000easxEntry 82 }

		fa1000easxRemoteAPwrDown OBJECT-TYPE
			SYNTAX  INTEGER {
						normal(1),
						event(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, remote A power down event
				1:normal
				2:event"
			::= { fa1000easxEntry 83 }

		fa1000easxRemoteALBKUp OBJECT-TYPE
			SYNTAX  INTEGER {
						normal(1),
						event(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, remote A loopback up event
				1:normal
				2:event"
			::= { fa1000easxEntry 84 }

		fa1000easxRemoteALBKDown OBJECT-TYPE
			SYNTAX  INTEGER {
						normal(1),
						event(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, remote A loopback down event
				1:normal
				2:event"
			::= { fa1000easxEntry 85 }

		fa1000easxX2LinkUp OBJECT-TYPE
			SYNTAX  INTEGER {
						normal(1),
						event(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber 2 link up event
				1:normal
				2:event"
			::= { fa1000easxEntry 86 }

		fa1000easxX2LinkDown OBJECT-TYPE
			SYNTAX  INTEGER {
						normal(1),
						event(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber 2 link down event
				1:normal
				2:event"
			::= { fa1000easxEntry 87 }

		fa1000easxRemoteBPwrUp OBJECT-TYPE
			SYNTAX  INTEGER {
						normal(1),
						event(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, remote B power up event
				1:normal
				2:event"
			::= { fa1000easxEntry 88 }

		fa1000easxRemoteBPwrDown OBJECT-TYPE
			SYNTAX  INTEGER {
						normal(1),
						event(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, remote B power down event
				1:normal
				2:event"
			::= { fa1000easxEntry 89 }

		fa1000easxRemoteBLBKUp OBJECT-TYPE
			SYNTAX  INTEGER {
						normal(1),
						event(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, remote B loopback up event
				1:normal
				2:event"
			::= { fa1000easxEntry 90 }

		fa1000easxRemoteBLBKDown OBJECT-TYPE
			SYNTAX  INTEGER {
						normal(1),
						event(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, remote B loopback down event
				1:normal
				2:event"
			::= { fa1000easxEntry 91 }

		fa1000easxU3LinkUp OBJECT-TYPE
			SYNTAX  INTEGER {
						normal(1),
						event(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, ethernet 3 link up event
				1:normal
				2:event"
			::= { fa1000easxEntry 92 }

		fa1000easxU4LinkUp OBJECT-TYPE
			SYNTAX  INTEGER {
						normal(1),
						event(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, ethernet 4 link up event
				1:normal
				2:event"
			::= { fa1000easxEntry 93 }

		fa1000easxU3LinkDown OBJECT-TYPE
			SYNTAX  INTEGER {
						normal(1),
						event(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, ethernet 3 link down event
				1:normal
				2:event"
			::= { fa1000easxEntry 94 }

		fa1000easxU4LinkDown OBJECT-TYPE
			SYNTAX  INTEGER {
						normal(1),
						event(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, ethernet 4 link down event
				1:normal
				2:event"
			::= { fa1000easxEntry 95 }

		fa1000easxMAC OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, MAC learning
				1:disable
				2:enable"
			::= { fa1000easxEntry 96 }

		fa1000easxTLPT OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						remoteA(2),
						remoteB(3),
						remoteAB(4),
						remoteA3B4(5)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, remote TLPT
				1:disable
				2:remote A
				3:remote B
				4:remote A+B
				5:remote A/3:B/4"
			::= { fa1000easxEntry 97 }

		fa1000easxX1Speed OBJECT-TYPE
			SYNTAX  INTEGER {
						f1g(1),
						f100m(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port 1 speed
				1:1G full duplex
				2:100M full duplex"
			::= { fa1000easxEntry 98 }

		fa1000easxX2Speed OBJECT-TYPE
			SYNTAX  INTEGER {
						f1g(1),
						f100m(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port 2 speed
				1:1G full duplex
				2:100M full duplex"
			::= { fa1000easxEntry 99 }
			
		fa1000easxU3SpeedStatus OBJECT-TYPE
			SYNTAX  INTEGER {
						f10m(1),
						f100m(2),
						f1g(3)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, UTP port 3 speed
				1:10M
				2:100M
				3:1G"
			::= { fa1000easxEntry 100 }
			
		fa1000easxU4SpeedStatus OBJECT-TYPE
			SYNTAX  INTEGER {
						f10m(1),
						f100m(2),
						f1g(3)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, UTP port 4 speed
				1:10M
				2:100M
				3:1G"
			::= { fa1000easxEntry 101 }

		fa1000easxU3DuplexStatus OBJECT-TYPE
			SYNTAX  INTEGER {
						half(1),
						full(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, UTP port 3 duplex
				1:half
				2:full"
			::= { fa1000easxEntry 102 }

		fa1000easxU4DuplexStatus OBJECT-TYPE
			SYNTAX  INTEGER {
						half(1),
						full(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, UTP port 4 duplex
				1:half
				2:full"
			::= { fa1000easxEntry 103 }			
			
		fa1000easxSetToDefault OBJECT-TYPE
			SYNTAX  INTEGER {
						noaction(1),
						action(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, set to default
				1:noaction
				2:action"
			::= { fa1000easxEntry 104 }
			
		fa1000easxRMONX1In OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS read-only  
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port2 ingress RMON counter "
			::= { fa1000easxEntry 105 }

		fa1000easxRMONX2In OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port2 ingress RMON counter "
			::= { fa1000easxEntry 106 }

		fa1000easxRMONU3In OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, ethernet port3 ingress RMON counter "
			::= { fa1000easxEntry 107 }
 
 		fa1000easxRMONU4In OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, ethernet port4 ingress RMON counter "
			::= { fa1000easxEntry 108 }

		fa1000easxRMONX1Out OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port2 egress RMON counter "
			::= { fa1000easxEntry 109 }

		fa1000easxRMONX2Out OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port2 egress RMON counter "
			::= { fa1000easxEntry 110 }

		fa1000easxRMONU3Out OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, ethernet port3 egress RMON counter "
			::= { fa1000easxEntry 111 }

		fa1000easxRMONU4Out OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, ethernet port4 egress RMON counter "
			::= { fa1000easxEntry 112 }
	
		fa1000easxChAOamCntTx OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, channel B TX OAMPDU frame count "
			::= { fa1000easxEntry 113 }

		fa1000easxChAOamCntRx OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, channel B RX OAMPDU frame count "
			::= { fa1000easxEntry 114 }

		fa1000easxChAOamCntTxInfo OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, channel B TX information OAMPDU frame count "
			::= { fa1000easxEntry 115 }

		fa1000easxChAOamCntRxInfo OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, channel RX information OAMPDU frame count "
			::= { fa1000easxEntry 116 }

		fa1000easxChAOamCntTxEvent OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, channel B TX event OAMPDU frame count "
			::= { fa1000easxEntry 117 }

		fa1000easxChAOamCntRxUniEvent OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, channel B RX unique event OAMPDU frame count "
			::= { fa1000easxEntry 118 }

		fa1000easxChAOamCntRxDupEvent OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, channel B RX duplicate event OAMPDU frame count "
			::= { fa1000easxEntry 119 }

		fa1000easxChAOamCntTxLp OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, channel B TX loopback control OAMPDU frame count "
			::= { fa1000easxEntry 120 }

		fa1000easxChAOamCntRxLp OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, channel B RX loopback control OAMPDU frame count "
			::= { fa1000easxEntry 121 }

		fa1000easxChAOamCntTxVarReq OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, channel B TX variable request OAMPDU frame count "
			::= { fa1000easxEntry 122 }

		fa1000easxChAOamCntRxVarReq OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, channel B RX variable request OAMPDU frame count "
			::= { fa1000easxEntry 123 }

		fa1000easxChAOamCntTxVarRsp OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, channel B TX variable response OAMPDU frame count "
			::= { fa1000easxEntry 124 }

		fa1000easxChAOamCntRxVarRsp OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, channel B RX variable response OAMPDU frame count "
			::= { fa1000easxEntry 125 }


		fa1000easxChAOamCntTxOui OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, channel B TX OUI OAMPDU frame count "
			::= { fa1000easxEntry 126 }

		fa1000easxChAOamCntRxOui OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, channel B RX OUI OAMPDU frame count "
			::= { fa1000easxEntry 127 }	
							
 		fa1000easxChAOamCntUnknown OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, channel B Unknown OAMPDU frame count "
			::= { fa1000easxEntry 128 }	
			                            
			                            
		fa1000easxChBOamCntTx OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, channel B TX OAMPDU frame count "
			::= { fa1000easxEntry 129 }

		fa1000easxChBOamCntRx OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, channel B RX OAMPDU frame count "
			::= { fa1000easxEntry 130 }

		fa1000easxChBOamCntTxInfo OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, channel B TX information OAMPDU frame count "
			::= { fa1000easxEntry 131 }

		fa1000easxChBOamCntRxInfo OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, channel RX information OAMPDU frame count "
			::= { fa1000easxEntry 132 }

		fa1000easxChBOamCntTxEvent OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, channel B TX event OAMPDU frame count "
			::= { fa1000easxEntry 133 }

		fa1000easxChBOamCntRxUniEvent OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, channel B RX unique event OAMPDU frame count "
			::= { fa1000easxEntry 134 }

		fa1000easxChBOamCntRxDupEvent OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, channel B RX duplicate event OAMPDU frame count "
			::= { fa1000easxEntry 135 }

		fa1000easxChBOamCntTxLp OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, channel B TX loopback control OAMPDU frame count "
			::= { fa1000easxEntry 136 }

		fa1000easxChBOamCntRxLp OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, channel B RX loopback control OAMPDU frame count "
			::= { fa1000easxEntry 137 }

		fa1000easxChBOamCntTxVarReq OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, channel B TX variable request OAMPDU frame count "
			::= { fa1000easxEntry 138 }

		fa1000easxChBOamCntRxVarReq OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, channel B RX variable request OAMPDU frame count "
			::= { fa1000easxEntry 139 }

		fa1000easxChBOamCntTxVarRsp OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, channel B TX variable response OAMPDU frame count "
			::= { fa1000easxEntry 140 }

		fa1000easxChBOamCntRxVarRsp OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, channel B RX variable response OAMPDU frame count "
			::= { fa1000easxEntry 141 }


		fa1000easxChBOamCntTxOui OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, channel B TX OUI OAMPDU frame count "
			::= { fa1000easxEntry 142 }

		fa1000easxChBOamCntRxOui OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, channel B RX OUI OAMPDU frame count "
			::= { fa1000easxEntry 143 }	
							
 		fa1000easxChBOamCntUnknown OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, channel B Unknown OAMPDU frame count "
			::= { fa1000easxEntry 144 }	

 		fa1000easxX1VendorName OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port2 vendor name "
			::= { fa1000easxEntry 145 }	
    
 		fa1000easxX1VendorPartNo OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port2 vendor Part No "
			::= { fa1000easxEntry 146 }	
			
 		fa1000easxX1TxWaveLength OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port2 TX wave length "
			::= { fa1000easxEntry 147 }	

 		fa1000easxX1RxWaveLength OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port2 RX wave length "
			::= { fa1000easxEntry 148 }
			
 		fa1000easxX1LinkLength OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port2 link length "
			::= { fa1000easxEntry 149 }

 		fa1000easxX1FiberType OBJECT-TYPE
			SYNTAX  INTEGER {
						multi(1),
						single(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port2 type 
				1:multi
				2:single"
			::= { fa1000easxEntry 150 }   
			
 		fa1000easxX1LengthUnit OBJECT-TYPE
			SYNTAX  INTEGER {
						km(1),
						m(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port2 link length unit 
				1:kilometer
				2:meter"
			::= { fa1000easxEntry 151 }  
	
 		fa1000easxX1DDStatus OBJECT-TYPE
			SYNTAX  INTEGER {
						no(1),
						yes(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port2 D/D status 
				1:no
				2:yes"
			::= { fa1000easxEntry 152 } 
								
 		fa1000easxX1TxPwr OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port2 TX power(dBM) "
			::= { fa1000easxEntry 153 }
    
  		fa1000easxX1RxPwr OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port2 RX power(dBM) "
			::= { fa1000easxEntry 154 }
    
   		fa1000easxX1RxSens OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port2 RX sensitivity(dBM) "
			::= { fa1000easxEntry 155 }
   
   		fa1000easxX1Temp OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port2 temperature(degree C) "
			::= { fa1000easxEntry 156 }
			
 		fa1000easxX2VendorName OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port2 vendor name "
			::= { fa1000easxEntry 157 }	
    
 		fa1000easxX2VendorPartNo OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port2 vendor Part No "
			::= { fa1000easxEntry 158 }	
			
 		fa1000easxX2TxWaveLength OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port2 TX wave length "
			::= { fa1000easxEntry 159 }	

 		fa1000easxX2RxWaveLength OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port2 RX wave length "
			::= { fa1000easxEntry 160 }
			
 		fa1000easxX2LinkLength OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port2 link length "
			::= { fa1000easxEntry 161 }

 		fa1000easxX2FiberType OBJECT-TYPE
			SYNTAX  INTEGER {
						multi(1),
						single(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port2 type 
				1:multi
				2:single"
			::= { fa1000easxEntry 162 }   
			
 		fa1000easxX2LengthUnit OBJECT-TYPE
			SYNTAX  INTEGER {
						km(1),
						m(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port2 link length unit 
				1:kilometer
				2:meter"
			::= { fa1000easxEntry 163 }  
	
 		fa1000easxX2DDStatus OBJECT-TYPE
			SYNTAX  INTEGER {
						no(1),
						yes(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port2 D/D status 
				1:no
				2:yes"
			::= { fa1000easxEntry 164 } 
								
 		fa1000easxX2TxPwr OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port2 TX power(dBM) "
			::= { fa1000easxEntry 165 }
    
  		fa1000easxX2RxPwr OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port2 RX power(dBM) "
			::= { fa1000easxEntry 166 }
    
   		fa1000easxX2RxSens OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port2 RX sensitivity(dBM) "
			::= { fa1000easxEntry 167 }
   
   		fa1000easxX2Temp OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, fiber port2 temperature(degree C) "
			::= { fa1000easxEntry 168 }
			
 		fa1000easxIpAddr OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, IP address "
			::= { fa1000easxEntry 169 }	

 		fa1000easxNetmask OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, subnet mask "
			::= { fa1000easxEntry 170 }	
			
 		fa1000easxGateway OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, gateway "
			::= { fa1000easxEntry 171 }
			
 		fa1000easxRedundancyMode OBJECT-TYPE
			SYNTAX  INTEGER {
						auto(1),
						fiber1(2),
						fiber2(3),
						noreverse(4),
						linkbudget(5)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, port redundancy mode 
				1:auto
				2:manual fiber1
				3:manual fiber2
				4:no reverse
				5:link budget"
			::= { fa1000easxEntry 172 }
			
		fa1000easxThreshold OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, the threshold on port redundancy mode, range:0~60"
			::= { fa1000easxEntry 173 } 

		fa1000easxSensitivity OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, the sensitivity on port redundancy mode, range:-60~0"
			::= { fa1000easxEntry 174 }
			                           
 		fa1000easxX1DefPortCoS OBJECT-TYPE
			SYNTAX  INTEGER {
						coS0(1),
						coS1(2),
						coS2(3),
						coS3(4),
						coS4(5),
						coS5(6),
						coS6(7),
						coS7(8)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, X1 Default Port CoS 
				1:0
				2:1
				3:2
				4:3
				5:4
				6:5
				7:6
				8:7"
			::= { fa1000easxEntry 175 }
			
 		fa1000easxX2DefPortCoS OBJECT-TYPE
			SYNTAX  INTEGER {
						coS0(1),
						coS1(2),
						coS2(3),
						coS3(4),
						coS4(5),
						coS5(6),
						coS6(7),
						coS7(8)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, X2 Default Port CoS 
				1:0
				2:1
				3:2
				4:3
				5:4
				6:5
				7:6
				8:7"
			::= { fa1000easxEntry 176 }
			
 		fa1000easxU3DefPortCoS OBJECT-TYPE
			SYNTAX  INTEGER {
						coS0(1),
						coS1(2),
						coS2(3),
						coS3(4),
						coS4(5),
						coS5(6),
						coS6(7),
						coS7(8)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, U3 Default Port CoS 
				1:0
				2:1
				3:2
				4:3
				5:4
				6:5
				7:6
				8:7"
			::= { fa1000easxEntry 177 }
			
 		fa1000easxU4DefPortCoS OBJECT-TYPE
			SYNTAX  INTEGER {
						coS0(1),
						coS1(2),
						coS2(3),
						coS3(4),
						coS4(5),
						coS5(6),
						coS6(7),
						coS7(8)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, U4 Default Port CoS 
				1:0
				2:1
				3:2
				4:3
				5:4
				6:5
				7:6
				8:7"
			::= { fa1000easxEntry 178 }
			
 		fa1000easxU5DefPortCoS OBJECT-TYPE
			SYNTAX  INTEGER {
						coS0(1),
						coS1(2),
						coS2(3),
						coS3(4),
						coS4(5),
						coS5(6),
						coS6(7),
						coS7(8)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, U5 Default Port CoS 
				1:0
				2:1
				3:2
				4:3
				5:4
				6:5
				7:6
				8:7"
			::= { fa1000easxEntry 179 }
			
 		fa1000easxTagCoS0 OBJECT-TYPE
			SYNTAX  INTEGER {
						class0(1),
						class1(2),
						class2(3),
						class3(4)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" Tag's Class of Service(CoS) Mapping to Internal Classify, The 3 is Highest.
				1:0
				2:1
				3:2
				4:3"
			::= { fa1000easxEntry 180 }  
			
 		fa1000easxTagCoS1 OBJECT-TYPE
			SYNTAX  INTEGER {
						class0(1),
						class1(2),
						class2(3),
						class3(4)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" Tag's Class of Service(CoS) Mapping to Internal Classify, The 3 is Highest.
				1:0
				2:1
				3:2
				4:3"
			::= { fa1000easxEntry 181 }  			
                                       
 		fa1000easxTagCoS2 OBJECT-TYPE
			SYNTAX  INTEGER {
						class0(1),
						class1(2),
						class2(3),
						class3(4)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" Tag's Class of Service(CoS) Mapping to Internal Classify, The 3 is Highest.
				1:0
				2:1
				3:2
				4:3"
			::= { fa1000easxEntry 182 }  
			
 		fa1000easxTagCoS3 OBJECT-TYPE
			SYNTAX  INTEGER {
						class0(1),
						class1(2),
						class2(3),
						class3(4)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" Tag's Class of Service(CoS) Mapping to Internal Classify, The 3 is Highest.
				1:0
				2:1
				3:2
				4:3"
			::= { fa1000easxEntry 183 }
			
 		fa1000easxTagCoS4 OBJECT-TYPE
			SYNTAX  INTEGER {
						class0(1),
						class1(2),
						class2(3),
						class3(4)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" Tag's Class of Service(CoS) Mapping to Internal Classify, The 3 is Highest.
				1:0
				2:1
				3:2
				4:3"
			::= { fa1000easxEntry 184 }  
			
 		fa1000easxTagCoS5 OBJECT-TYPE
			SYNTAX  INTEGER {
						class0(1),
						class1(2),
						class2(3),
						class3(4)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" Tag's Class of Service(CoS) Mapping to Internal Classify, The 3 is Highest.
				1:0
				2:1
				3:2
				4:3"
			::= { fa1000easxEntry 185 }
			
 		fa1000easxTagCoS6 OBJECT-TYPE
			SYNTAX  INTEGER {
						class0(1),
						class1(2),
						class2(3),
						class3(4)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" Tag's Class of Service(CoS) Mapping to Internal Classify, The 3 is Highest.
				1:0
				2:1
				3:2
				4:3"
			::= { fa1000easxEntry 186 }
			
 		fa1000easxTagCoS7 OBJECT-TYPE
			SYNTAX  INTEGER {
						class0(1),
						class1(2),
						class2(3),
						class3(4)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" Tag's Class of Service(CoS) Mapping to Internal Classify, The 3 is Highest.
				1:0
				2:1
				3:2
				4:3"
			::= { fa1000easxEntry 187 }
			    
	fa1000easxVLANTable OBJECT-TYPE
		SYNTAX      SEQUENCE OF Fa1000easxVLANEntry
		MAX-ACCESS  not-accessible
		STATUS      current
		DESCRIPTION
				"A list of  FRM220A-1000EAS/X series card entries.
				The number of entries is fa1000easx-No-L."
		::= { fa1000easxCards 2 }

	fa1000easxVLANEntry OBJECT-TYPE
		SYNTAX      Fa1000easxVLANEntry
		MAX-ACCESS  not-accessible
		STATUS      current
		DESCRIPTION
				"An entry containing VLAN management information applicable
				to a particular  FRM220A-1000EAS/X series card."
		INDEX   { fa1000easxVLANChassisIndex, fa1000easxVLANSlotIndex, fa1000easxVLANSideIndex }
		::= {  fa1000easxVLANTable 1 } 

	Fa1000easxVLANEntry ::=
		SEQUENCE {  
				  fa1000easxVLANChassisIndex	      INTEGER,
				  fa1000easxVLANSlotIndex		      INTEGER,
				  fa1000easxVLANSideIndex		      INTEGER,
				  fa1000easxMgmtVID				  INTEGER,
				  fa1000easxP1VID				  INTEGER,
				  fa1000easxP2VID				  INTEGER,
				  fa1000easxP3VID				  INTEGER,
				  fa1000easxP4VID				  INTEGER,
				  fa1000easxP5VID				  INTEGER,
				  fa1000easxP1QinQ				  INTEGER,
				  fa1000easxP2QinQ				  INTEGER,
				  fa1000easxP3QinQ				  INTEGER,
				  fa1000easxP4QinQ				  INTEGER,
				  fa1000easxP5QinQ				  INTEGER,
				  fa1000easxTagType				  DisplayString,
				  fa1000easx1QVlanCreate		  INTEGER,
	              fa1000easx1QVlanDelete		  INTEGER,
	              fa1000easx1QVlanClear			  INTEGER,
	              fa1000easx1QVlanReset			  INTEGER	                          
		}
		
       fa1000easxVLANChassisIndex OBJECT-TYPE
			SYNTAX  INTEGER (0..9)
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"A unique value for each  card. 
				It is the slot location number."
			::= { fa1000easxVLANEntry 1 }

	  fa1000easxVLANSlotIndex OBJECT-TYPE
			SYNTAX  INTEGER (1..20)
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"A unique value for each  card. 
				It is the slot location number."
			::= { fa1000easxVLANEntry 2 }  
			
	 fa1000easxVLANSideIndex OBJECT-TYPE
			SYNTAX  INTEGER (0..2)
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A side
				1:Local
				2:Remote"
			::= { fa1000easxVLANEntry 3 }
			
   		fa1000easxMgmtVID	 OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, managenment VLAN ID "
			::= { fa1000easxVLANEntry 4 } 
					
   		fa1000easxP1VID	 OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, port1 VLAN ID "
			::= { fa1000easxVLANEntry 5 }

   		fa1000easxP2VID	 OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, port2 VLAN ID "
			::= { fa1000easxVLANEntry 6 } 
			
   		fa1000easxP3VID	 OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, port3 VLAN ID "
			::= { fa1000easxVLANEntry 7 }  
			
   		fa1000easxP4VID	 OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, port4 VLAN ID "
			::= { fa1000easxVLANEntry 8 }
			
   		fa1000easxP5VID	 OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, port5 VLAN ID "
			::= { fa1000easxVLANEntry 9 }    
			
   		fa1000easxP1QinQ	 OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, port1 QinQ support 
				1:disable
				2:enable "    
			::= { fa1000easxVLANEntry 10 }

   		fa1000easxP2QinQ	 OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, port1 QinQ support 
				1:disable
				2:enable "   			
			::= { fa1000easxVLANEntry 11 } 
			
   		fa1000easxP3QinQ	 OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, port1 QinQ support 
				1:disable
				2:enable "   			
			::= { fa1000easxVLANEntry 12 }  
			
   		fa1000easxP4QinQ OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, port1 QinQ support 
				1:disable
				2:enable "   
			::= { fa1000easxVLANEntry 13 }
			
   		fa1000easxP5QinQ OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, port5 QinQ support 
				1:disable
				2:enable "   
			::= { fa1000easxVLANEntry 14 }


   		fa1000easxTagType  OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, tag type(HEX) "
			::= { fa1000easxVLANEntry 15 }

   		fa1000easx1QVlanCreate	 OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, create the VLAN ID(1~4094) "
			::= { fa1000easxVLANEntry 16 }
			
   		fa1000easx1QVlanDelete	 OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, delete the VLAN ID "
			::= { fa1000easxVLANEntry 17 }
		
		fa1000easx1QVlanClear OBJECT-TYPE
			SYNTAX  INTEGER {
						noaction(1),
						action(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, clear VLAN table(trigger)
				1:no action
				2:action"
			::= { fa1000easxVLANEntry 18 }

			
		fa1000easx1QVlanReset OBJECT-TYPE
			SYNTAX  INTEGER {
						noaction(1),
						action(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, reset all VLAN parameters(trigger)
				1:no action
				2:action"
			::= { fa1000easxVLANEntry 19 }  
							    
	fa1000easxStaticVLANTable OBJECT-TYPE
		SYNTAX      SEQUENCE OF Fa1000easxStaticVLANEntry
		MAX-ACCESS  not-accessible
		STATUS      current
		DESCRIPTION
				"A list of  FRM220A-1000EAS/X series card entries.
				Static Vlan Table."
		::= { fa1000easxCards 3 }

	fa1000easxStaticVLANEntry OBJECT-TYPE
		SYNTAX      Fa1000easxStaticVLANEntry
		MAX-ACCESS  not-accessible
		STATUS      current
		DESCRIPTION                               
				"An entry containing Static VLAN table."
		INDEX   { fa1000easxStaticVLANTableChassisIndex,
		          fa1000easxStaticVLANTableSlotIndex,
		          fa1000easxStaticVLANTableSideIndex,
		          fa1000easxVlanID,
		          fa1000easxVlanPortIndex }
		::= {  fa1000easxStaticVLANTable 1 } 

	Fa1000easxStaticVLANEntry ::=
		SEQUENCE {   
				  fa1000easxStaticVLANTableChassisIndex	      	  Integer32,
				  fa1000easxStaticVLANTableSlotIndex		      Integer32,
				  fa1000easxStaticVLANTableSideIndex		      Integer32,
				  fa1000easxVlanID                        		  Integer32, 
				  fa1000easxVlanPortIndex					      Integer32,						  
				  fa1000easxVlanPortStatus						  INTEGER
				 } 
				 
	fa1000easxStaticVLANTableChassisIndex OBJECT-TYPE
		SYNTAX  Integer32 (0..9)
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
			"A unique value for each  card. 
			It is the slot location number."
			::= { fa1000easxStaticVLANEntry 1 }
			
	fa1000easxStaticVLANTableSlotIndex OBJECT-TYPE
		SYNTAX  Integer32 (1..20)
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
			"A unique value for each  card. 
			It is the slot location number."
			::= { fa1000easxStaticVLANEntry 2 }  
			
	fa1000easxStaticVLANTableSideIndex OBJECT-TYPE
			SYNTAX  Integer32 (0..2)
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A side
				1:Local
				2:Remote"
			::= { fa1000easxStaticVLANEntry 3 }
					                   
			
	 fa1000easxVlanID OBJECT-TYPE
            SYNTAX      Integer32 (0..4095)
            MAX-ACCESS  read-only
            STATUS      current
            DESCRIPTION
                "Configures the VLAN identifier for the port.
                 The allowed values are 0 through 4095. The default value is 1."
             
            ::= { fa1000easxStaticVLANEntry 4 }   

	fa1000easxVlanPortIndex	  OBJECT-TYPE
			SYNTAX  Integer32	(1..5)				                     
			MAX-ACCESS  read-only
    		STATUS  current
			DESCRIPTION
				"VLAN Table Port Index."
			::= { fa1000easxStaticVLANEntry 5 } 
            
     fa1000easxVlanPortStatus  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1000EAS/X Series card, table 1 port 5 status
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

	::= { fa1000easxStaticVLANEntry 6 }

			 
	 
	              
-- FSW-103 Series
fafswProject OBJECT IDENTIFIER ::= { faGswSnmp 4200 }
    
fafswCards  OBJECT IDENTIFIER ::= { fafswProject 1 }
         
	fafswTable OBJECT-TYPE
		SYNTAX      SEQUENCE OF FafswEntry
		MAX-ACCESS  not-accessible
		STATUS      current
		DESCRIPTION
				"A list of  FRM220A-FSW103 series card entries.
				The number of entries is fafsw-No-L."
		::= { fafswCards 1 }

	fafswEntry OBJECT-TYPE
		SYNTAX      FafswEntry
		MAX-ACCESS  not-accessible
		STATUS      current
		DESCRIPTION
				"An entry containing management information applicable
				to a particular  FRM220A-FSW103 series card."
		INDEX   { fFSWChassisIndex, fFSWSlotIndex, fFSWSideIndex }
		::= {  fafswTable 1 } 

	FafswEntry ::=
		SEQUENCE {  
				  fFSWChassisIndex	      INTEGER,
				  fFSWSlotIndex		      INTEGER,
				  fFSWSideIndex		      INTEGER,
				  fFSWCardHWVer		      DisplayString,
				  fFSWCardFWVer		      DisplayString,
				  fFSWCardCPLDVer	      DisplayString,
				  fFSWCardFPGAVer	      DisplayString,
				  fFSWPortActive	      	  INTEGER,
				  fFSWPortReset		      INTEGER,
				  fFSWSettoDefault		  INTEGER,
				  fFSWAls			 	  INTEGER,
				  fFSWFxLink			  INTEGER,
				  fFSWRxLoss			  INTEGER,
				  fFSWU1Active			  INTEGER,
				  fFSWU2Active			  INTEGER,
				  fFSWU3Active			  INTEGER,
				  fFSWU1Nego			  INTEGER,
				  fFSWU2Nego			  INTEGER,
				  fFSWU3Nego			  INTEGER,
				  fFSWU1Nego			  INTEGER,
				  fFSWU2Nego			  INTEGER,
				  fFSWU3Nego			  INTEGER,
				  fFSWU1Speed			  INTEGER,
				  fFSWU2Speed			  INTEGER,
				  fFSWU3Speed			  INTEGER,
				  fFSWU1Duplex			  INTEGER,
				  fFSWU2Duplex			  INTEGER,
				  fFSWU3Duplex			  INTEGER,
				  fFSWU1LinkSts			  INTEGER,
				  fFSWU2LinkSts			  INTEGER,
				  fFSWU3LinkSts			  INTEGER,
				  fFSWU1SpeedSts		  INTEGER,
				  fFSWU2SpeedSts		  INTEGER,
				  fFSWU3SpeedSts		  INTEGER,
				  fFSWU1DuplexSts		  INTEGER,
				  fFSWU2DuplexSts		  INTEGER,
				  fFSWU3DuplexSts		  INTEGER,
				  fFSWFxDD			      INTEGER,
				  fFSWDDVendor		  	  DisplayString,
				  fFSWDDPartNo		  	  DisplayString,
				  fFSWDDFiberType		  INTEGER,
				  fFSWDDWaveLen	  		  DisplayString,
				  fFSWDDWaveLen2	  	  DisplayString,
				  fFSWDDLinkLen			  DisplayString,
				  fFSWDDLenUnit			  INTEGER,
				  fFSWDDStatus		  	  INTEGER,
				  fFSWDDRxSens		  	  DisplayString,
				  fFSWDDTxPWR			  DisplayString,
				  fFSWDDRxPWR			  DisplayString,
				  fFSWDDTemp			  DisplayString,
				  fFSWDDPWRMargin	      DisplayString  					     
	}
       fFSWChassisIndex OBJECT-TYPE
			SYNTAX  INTEGER (0..9)
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"A unique value for each  card. 
				It is the slot location number."
			::= { fafswEntry 1 }

		fFSWSlotIndex OBJECT-TYPE
			SYNTAX  INTEGER (1..20)
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"A unique value for each  card. 
				It is the slot location number."
			::= { fafswEntry 2 }  
			
		fFSWSideIndex OBJECT-TYPE
			SYNTAX  INTEGER (0..2)
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A side
				1:Local
				2:Remote"
			::= { fafswEntry 3 }

		fFSWCardHWVer OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card hardware version x.xxx"
			::= { fafswEntry 4 }

		fFSWCardFWVer OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card firmware version x.xxx"
			::= { fafswEntry 5 }

		fFSWCardCPLDVer OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card CPLD version x.xxx"
			::= { fafswEntry 6 }

		fFSWCardFPGAVer OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card FPGA version x.xxx"
			::= { fafswEntry 7 }
			
		fFSWPortActive OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card active:
				1:Disable
				2:Enable"
			::= { fafswEntry 8 }

		fFSWPortReset OBJECT-TYPE
			SYNTAX  INTEGER {
						off(1),
						action(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card portreset:
				1:OFF
				2:Action"
			::= { fafswEntry 9 }

		fFSWSettoDefault OBJECT-TYPE
			SYNTAX  INTEGER {
						off(1),
						action(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card set to default:
				1:OFF
				2:Action"
			::= { fafswEntry 10 }
			
		fFSWAls OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card ALS:
				1:Disable
				2:Enable"
			::= { fafswEntry 11 }

    	fFSWFxLink OBJECT-TYPE
		  SYNTAX  INTEGER {
						link-down(1),
						link-up(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local FRM220A-FSW103 card fiber link status:
				1:Link down
				2:Link up"
			::= { fafswEntry 12 }

    	fFSWRxLoss OBJECT-TYPE
		  SYNTAX  INTEGER {
						no(1),
						yes(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local FRM220A-FSW103 card fiber loss status:
				1:No
				2:Yes"
			::= { fafswEntry 13 }

		fFSWU1Active OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card UTP1 Active:
				1:Disable
				2:Enable"
			::= { fafswEntry 14 }

		fFSWU2Active OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card UTP2 Active:
				1:Disable
				2:Enable"
			::= { fafswEntry 15 }

		fFSWU3Active OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card UTP3 Active:
				1:Disable
				2:Enable"
			::= { fafswEntry 16 }

		fFSWU1Nego OBJECT-TYPE
			SYNTAX  INTEGER {
						manual(1),
						auto(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card UTP1 Negotiation:
				1:Manual
				2:Auto"
			::= { fafswEntry 17 }

		fFSWU2Nego OBJECT-TYPE
			SYNTAX  INTEGER {
						manual(1),
						auto(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card UTP2 Negotiation:
				1:Manual
				2:Auto"
			::= { fafswEntry 18 }

		fFSWU3Nego OBJECT-TYPE
			SYNTAX  INTEGER {
						manual(1),
						auto(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card UTP3 Negotiation:
				1:Manual
				2:Auto"
			::= { fafswEntry 19 }

		fFSWU1Speed OBJECT-TYPE
			SYNTAX  INTEGER {
						f10m(1),
						f100m(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card UTP1 Speed:
				1:10
				2:100"
			::= { fafswEntry 20 }

		fFSWU2Speed OBJECT-TYPE
			SYNTAX  INTEGER {
						f10m(1),
						f100m(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card UTP2 Speed:
				1:10
				2:100"
			::= { fafswEntry 21 }
			
		fFSWU3Speed OBJECT-TYPE
			SYNTAX  INTEGER {
						f10m(1),
						f100m(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card UTP3 Speed:
				1:10
				2:100"
			::= { fafswEntry 22 }

		fFSWU1Duplex OBJECT-TYPE
			SYNTAX  INTEGER {
						half(1),
						full(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card UTP1 Duplex:
				1:Half
				2:Full"
			::= { fafswEntry 23 }

		fFSWU2Duplex OBJECT-TYPE
			SYNTAX  INTEGER {
						half(1),
						full(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card UTP2 Duplex:
				1:Half
				2:Full"
			::= { fafswEntry 24 }

		fFSWU3Duplex OBJECT-TYPE
			SYNTAX  INTEGER {
						half(1),
						full(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card UTP3 Duplex:
				1:Half
				2:Full"
			::= { fafswEntry 25 }

		fFSWU1LinkSts OBJECT-TYPE
			SYNTAX  INTEGER {
						off(1),
						on(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card UTP1 Link Status:
				1:Off
				2:On"
			::= { fafswEntry 26 }

		fFSWU2LinkSts OBJECT-TYPE
			SYNTAX  INTEGER {
						off(1),
						on(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card UTP2 Link Status:
				1:Off
				2:On"
			::= { fafswEntry 27 }

		fFSWU3LinkSts OBJECT-TYPE
			SYNTAX  INTEGER {
						off(1),
						on(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card UTP3 Link Status:
				1:Off
				2:On"
			::= { fafswEntry 28 }

		fFSWU1SpeedSts OBJECT-TYPE
			SYNTAX  INTEGER {
						f10m(1),
						f100m(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card UTP1 Speed Status:
				1:10
				2:100"
			::= { fafswEntry 29 }

		fFSWU2SpeedSts OBJECT-TYPE
			SYNTAX  INTEGER {
						f10m(1),
						f100m(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card UTP2 Speed Status:
				1:10
				2:100"
			::= { fafswEntry 30 }

		fFSWU3SpeedSts OBJECT-TYPE
			SYNTAX  INTEGER {
						f10m(1),
						f100m(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card UTP3 Speed Status:
				1:10
				2:100"
			::= { fafswEntry 31 }

		fFSWU1DuplexSts OBJECT-TYPE
			SYNTAX  INTEGER {
						half(1),
						full(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card UTP1 Speed Status:
				1:Half
				2:Full"
			::= { fafswEntry 32 }

		fFSWU2DuplexSts OBJECT-TYPE
			SYNTAX  INTEGER {
						half(1),
						full(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card UTP2 Speed Status:
				1:Half
				2:Full"
			::= { fafswEntry 33 } 
			
		fFSWU3DuplexSts OBJECT-TYPE
			SYNTAX  INTEGER {
						half(1),
						full(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card UTP3 Speed Status:
				1:Half
				2:Full"
			::= { fafswEntry 34 }
			
		fFSWFxDD OBJECT-TYPE
			SYNTAX  INTEGER {
						no(1),
						yes(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card fiber Digital Diagnostic
				function:
				1:No
				2:Yes"
			::= { fafswEntry 35 }

		fFSWDDVendor OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card fiber D/D information:
				Vendor name"
			::= { fafswEntry 36 }

		fFSWDDPartNo OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card fiber D/D information:
				Vendor part number"
			::= { fafswEntry 37 }

		fFSWDDFiberType OBJECT-TYPE
			SYNTAX  INTEGER{
						multi(1),
						single(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card fiber D/D information:
				Fiber Type"
			::= { fafswEntry 38 }
			
		fFSWDDWaveLen OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card fiber D/D information:
				Wave length"
			::= { fafswEntry 39 }

		fFSWDDWaveLen2 OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card fiber D/D information:
				Wave length 2"
			::= { fafswEntry 40 }

		fFSWDDLinkLen OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card fiber D/D information:
				Link length"
			::= { fafswEntry 41 }
			
		fFSWDDLenUnit OBJECT-TYPE
			SYNTAX  INTEGER{
						kilometer(1),
						meter(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card fiber D/D information:
				Length Unit"
			::= { fafswEntry 42}    
		
		fFSWDDStatus OBJECT-TYPE
			SYNTAX  INTEGER{
						no(1),
						yes(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card fiber D/D information:
				Status Support"
			::= { fafswEntry 43 }
			
		fFSWDDRxSens OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card fiber D/D information:
				Rx Sensitivity"
			::= { fafswEntry 44 }

		fFSWDDTxPWR OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card fiber D/D information:
				Tx power"
			::= { fafswEntry 45 }

		fFSWDDRxPWR OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card fiber D/D information:
				Rx power"
			::= { fafswEntry 46 }
			
		fFSWDDTemp OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card fiber D/D information:
				Temperature in degree C"
			::= { fafswEntry 47 }
			
		fFSWDDPWRMargin OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-FSW103 Series card fiber D/D information:
				Power margin"
			::= { fafswEntry 48 }

-- 10G Series
fa10gProject OBJECT IDENTIFIER ::= { faGswSnmp 2700 }
    
fa10gCards  OBJECT IDENTIFIER ::= { fa10gProject 1 }
         
	fa10gTable OBJECT-TYPE
		SYNTAX      SEQUENCE OF Fa10gEntry
		MAX-ACCESS  not-accessible
		STATUS      current
		DESCRIPTION
				"A list of  FRM220A-10G series card entries.
				The number of entries is fa10G-No-L."
		::= { fa10gCards 1 }

	fa10gEntry OBJECT-TYPE
		SYNTAX      Fa10gEntry
		MAX-ACCESS  not-accessible
		STATUS      current
		DESCRIPTION
				"An entry containing management information applicable
				to a particular  FRM220A-10G series card."
		INDEX   { f10GChassisIndex, f10GSlotIndex, f10GSideIndex }
		::= {  fa10gTable 1 } 

	Fa10gEntry ::=
		SEQUENCE {   
				  f10GChassisIndex	  	INTEGER,
				  f10GSlotIndex		    INTEGER,
				  f10GSideIndex		  	INTEGER, 	  
				  f10GCardHWVer		    DisplayString,
				  f10GCardFWVer		    DisplayString,
				  f10GCardCPLDVer	    DisplayString,
				  f10GCardFPGAVer	    DisplayString,
          		  f10GModel           	INTEGER,
				  f10GDeviceActive	  	INTEGER,
				  f10GFx1Link		      INTEGER,
				  f10GFx2Link		      INTEGER,
					f10GFx3Link		      INTEGER,
					f10GFx1CRDLocked	  INTEGER,
					f10GFx2CRDLocked	  INTEGER,
					f10GFx3CRDLocked	  INTEGER,
					f10GFx1LossPropagation INTEGER,
					f10GFx2LossPropagation INTEGER,
					f10GFx3LossPropagation INTEGER,
          			f10GFx1AlsMode	    INTEGER,
          			f10GFx2AlsMode	    INTEGER,
          			f10GFx3AlsMode	    INTEGER,
					f10GPortReset		    INTEGER,
					f10GSetDefault	    INTEGER,
					f10GSystemOK	      INTEGER,
					f10GFx1Lbsetting	  INTEGER,
					f10GFx2Lbsetting	  INTEGER,
					f10GFx3Lbsetting	  INTEGER,
					f10GLbEnable		    INTEGER,
					f10GBaudRate		    INTEGER,
					f10GOpticFxPro	    INTEGER,
					f10GActivePath	    INTEGER,
					f10GFx1LinkAlarm    INTEGER,
					f10GFx2LinkAlarm    INTEGER,
					f10GFx3LinkAlarm    INTEGER,
					f10GFx1DD			      INTEGER,
					f10GFx1DDVendor	    DisplayString,
					f10GFx1DDPartNo	    DisplayString,
					f10GFx1DDFiberType  INTEGER,
					f10GFx1DDWaveLen    DisplayString,
					f10GFx1DDWaveLen2   DisplayString,
					f10GFx1DDLinkLen    DisplayString,
					f10GFx1DDLenUnit	  INTEGER,
					f10GFx1DDStatus	    INTEGER,
					f10GFx1DDRxSens	    DisplayString,
					f10GFx1DDTxPWR	    DisplayString,
					f10GFx1DDRxPWR	    DisplayString,
					f10GFx1DDTemp	      DisplayString,
					f10GFx1DDPWRMargin  INTEGER,
					f10GFx2DD			      INTEGER,
					f10GFx2DDVendor	    DisplayString,
					f10GFx2DDPartNo	    DisplayString,
					f10GFx2DDFiberType  INTEGER,
					f10GFx2DDWaveLen    DisplayString,
					f10GFx2DDWaveLen2   DisplayString,
					f10GFx2DDLinkLen    DisplayString,
					f10GFx2DDLenUnit	  INTEGER,
					f10GFx2DDStatus	    INTEGER,
					f10GFx2DDRxSens	    DisplayString,
					f10GFx2DDTxPWR	    DisplayString,
					f10GFx2DDRxPWR	    DisplayString,
					f10GFx2DDTemp		    DisplayString,
					f10GFx2DDPWRMargin  INTEGER,
          			f10GFx3DD			      INTEGER,
					f10GFx3DDVendor	    DisplayString,
					f10GFx3DDPartNo	    DisplayString,
					f10GFx3DDFiberType  INTEGER,
					f10GFx3DDWaveLen    DisplayString,
					f10GFx3DDWaveLen2   DisplayString,
					f10GFx3DDLinkLen    DisplayString,
					f10GFx3DDLenUnit	  INTEGER,
					f10GFx3DDStatus	    INTEGER,
					f10GFx3DDRxSens	    DisplayString,
					f10GFx3DDTxPWR	    DisplayString,
					f10GFx3DDRxPWR	    DisplayString,
					f10GFx3DDTemp		    DisplayString,
					f10GFx3DDPWRMargin  INTEGER  					     
	}
       f10GChassisIndex OBJECT-TYPE
			SYNTAX  INTEGER (0..9)
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"A unique value for each  card. 
				It is the slot location number."
			::= { fa10gEntry 1 }

		f10GSlotIndex OBJECT-TYPE
			SYNTAX  INTEGER (1..20)
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"A unique value for each  card. 
				It is the slot location number."
			::= { fa10gEntry 2 }  
			
		f10GSideIndex OBJECT-TYPE
			SYNTAX  INTEGER (0..2)
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A side
				1:Local
				2:Remote"
			::= { fa10gEntry 3 }

		f10GCardHWVer OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-10G Series card hardware version x.xxx"
			::= { fa10gEntry 4 }

		f10GCardFWVer OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-10G Series card firmware version x.xxx"
			::= { fa10gEntry 5 }

		f10GCardCPLDVer OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-10G Series card CPLD version x.xxx"
			::= { fa10gEntry 6 }

		f10GCardFPGAVer OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-10G Series card FPGA version x.xxx"
			::= { fa10gEntry 7 }
			
        f10GModel OBJECT-TYPE
            SYNTAX  INTEGER {
						frm220-10G-sxx(1),
						frm220-10G-sx(2),
						frm220-10G-xx(3)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local CardType:
				1:frm220A-10G/SXX
				2:frm220A-10G/SX
				3:frm220A-10G/XX"
			::= { fa10gEntry 8 }
			
		f10GDeviceActive OBJECT-TYPE
			SYNTAX  INTEGER {
						inactive(1),
						active(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card active:
				1:Inactive
				2:Active"
			::= { fa10gEntry 9 }

		f10GFx1Link OBJECT-TYPE
			SYNTAX  INTEGER {
						link-down(1),
						link-up(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card Fiber1 link status:
				1:Link down
				2:Link up"
			::= { fa10gEntry 10 }

		f10GFx2Link OBJECT-TYPE
			SYNTAX  INTEGER {
						link-down(1),
						link-up(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card Fiber2 link status:
				0:Link down
				1:Link up"
			::= { fa10gEntry 11 }
			
		f10GFx3Link OBJECT-TYPE
			SYNTAX  INTEGER {
						link-down(1),
						link-up(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card Fiber3 link status:
				1:Link down
				2:Link up"
			::= { fa10gEntry 12 }	

		f10GFx1CRDLocked OBJECT-TYPE
			SYNTAX  INTEGER {
						not-locked(1),
						locked(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card Fiber1 CRD Locked:
				1:Not Locked
				2:Locked"
			::= { fa10gEntry 13 }
				
		f10GFx2CRDLocked OBJECT-TYPE
			SYNTAX  INTEGER {
						not-locked(1),
						locked(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local FRM220A-10G card Fiber2 CRD Locked:
				1:Not Locked
				2:Locked"
			::= { fa10gEntry 14 }
			
		f10GFx3CRDLocked OBJECT-TYPE
			SYNTAX  INTEGER {
						not-locked(1),
						locked(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card Fiber3 CRD Locked:
				1:Not Locked
				2:Locked"
			::= { fa10gEntry 15 }	

		f10GFx1LossPropagation OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card Fiber1 Loss Propagation:
				1:Disable
				2:Enable"
			::= { fa10gEntry 16 }

    f10GFx2LossPropagation OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card Fiber2 Loss Propagation:
				1:Disable
				2:Enable"
			::= { fa10gEntry 17 }
			
			f10GFx3LossPropagation OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card Fiber3 Loss Propagation:
				1:Disable
				2:Enable"
			::= { fa10gEntry 18 }
			
		 f10GFx1AlsMode OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card Fiber1 Auto Laser Showdown:
				1:Disable
				2:Enable"
			::= { fa10gEntry 19 }
    
      f10GFx2AlsMode OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card Fiber2 Auto Laser Showdown:
				1:Disable
				2:Enable"
			::= { fa10gEntry 20 }
      
     f10GFx3AlsMode OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card Fiber3 Auto Laser Showdown:
				1:Disable
				2:Enable"
			::= { fa10gEntry 21 }   

		f10GPortReset OBJECT-TYPE
			SYNTAX  INTEGER {
						off(1),
						action(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Force local frm220A-10G card to reset mode:
				1:Off
				2:Action"
			::= { fa10gEntry 22 }
		
		f10GSetDefault OBJECT-TYPE
			SYNTAX  INTEGER {
						off(1),
						action(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card set to default :
				1:Off
				2:Action"
			::= { fa10gEntry 23 }

		f10GSystemOK OBJECT-TYPE
			SYNTAX  INTEGER {
						failure(1),
						ok(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card system status:
				1:Failure
				2:Ok"
			::= { fa10gEntry 24 }
    
    f10GFx1Lbsetting OBJECT-TYPE
			SYNTAX  INTEGER {
						off(1),
						on(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card Fiber1 Loopback:
				1:Off
				2:On"
			::= { fa10gEntry 25 }
			
		f10GFx2Lbsetting OBJECT-TYPE
			SYNTAX  INTEGER {
						off(1),
						on(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card Fiber1 Loopback:
				1:Off
				2:On"
			::= { fa10gEntry 26 }
			
		f10GFx3Lbsetting OBJECT-TYPE
			SYNTAX  INTEGER {
						off(1),
						on(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card Fiber3 Loopback:
				1:Off
				2:On"
			::= { fa10gEntry 27 }	
			
		 f10GLbEnable OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card Loopback mode:
				1:Disable
				2:Enable"
			::= { fa10gEntry 28 }
			
		f10GBaudRate OBJECT-TYPE
			SYNTAX  INTEGER {
						rate10G-Ethernet(1),
						rate10G-Fiber-Channel(2),
						oc-192-STM-64(3),
						gdot709-OTU2(4),
						rate1G-Fiber-Channel(5),
						rate2G-Fiber-Channel(6),
						rate4G-Fiber-Channel(7),
						rate8G-Fiber-Channel(8),
						rate1G-Ethernet(9)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card BaudRate:
				 (Hardware Version >= 2.0 only support 1, 3, 4, 9)
		        1:10G Ethernet
		        2:10G Fiber Channel
		        3:OC-192/STM-64
		        4:G.709 OTU2
		        5:1G Fiber Channel
		        6:2G Fiber Channel
		        7:4G Fiber Channel
		        8:8G Fiber Channel
            	9:1G Ethernet"
			::= { fa10gEntry 29 }
		
    f10GOpticFxPro OBJECT-TYPE
			SYNTAX  INTEGER {
						manual(1),
						auto(2),
						semi-auto(3),
						pri-to-sec(4)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card optic fiber protection:
				1:Manual
				2:Auto
        		3:Semi-Auto
        		4:Pri to Sec"
			::= { fa10gEntry 30 }
    
		f10GActivePath OBJECT-TYPE
			SYNTAX  INTEGER {
						primary(1),
						second(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card Loopback mode:
				1:Primary
				2:Second"
			::= { fa10gEntry 31 }
    
    f10GFx1LinkAlarm  OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card Fx1 Link Alarm:
				1:Disalbe
				2:Enable"
			::= { fa10gEntry 32 }
			
		f10GFx2LinkAlarm  OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card Fx2 Link Alarm:
				1:Disalbe
				2:Enable"
			::= { fa10gEntry 33 }
			
		f10GFx3LinkAlarm  OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card Fx3 Link Alarm:
				1:Disalbe
				2:Enable"
			::= { fa10gEntry 34 }
    	
		f10GFx1DD OBJECT-TYPE
			SYNTAX  INTEGER {
						no(1),
						yes(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber Digital Diagnostic
				function:
				1:No
				2:Yes"
			::= { fa10gEntry 35 }

		f10GFx1DDVendor OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber D/D information:
				Vendor name"
			::= { fa10gEntry 36 }

		f10GFx1DDPartNo OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber D/D information:
				Vendor part number"
			::= { fa10gEntry 37 }

		f10GFx1DDFiberType OBJECT-TYPE
			SYNTAX  INTEGER{
						multi(1),
						single(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber D/D information:
				Fiber Type"
			::= { fa10gEntry 38 }
			
		f10GFx1DDWaveLen OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber D/D information:
				Wave length"
			::= { fa10gEntry 39 }

		f10GFx1DDWaveLen2 OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber D/D information:
				Wave length 2"
			::= { fa10gEntry 40 }

		f10GFx1DDLinkLen OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber D/D information:
				Link length"
			::= { fa10gEntry 41 }
			
		f10GFx1DDLenUnit OBJECT-TYPE
			SYNTAX  INTEGER{
						kilometer(1),
						meter(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber D/D information:
				Length Unit"
			::= { fa10gEntry 42}    
		
		f10GFx1DDStatus OBJECT-TYPE
			SYNTAX  INTEGER{
						no(1),
						yes(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber D/D information:
				Status Support"
			::= { fa10gEntry 43 }
			
		f10GFx1DDRxSens OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber D/D information:
				Rx Sensitivity"
			::= { fa10gEntry 44 }

		f10GFx1DDTxPWR OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber D/D information:
				Tx power"
			::= { fa10gEntry 45 }

		f10GFx1DDRxPWR OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber D/D information:
				Rx power"
			::= { fa10gEntry 46 }
			
		f10GFx1DDTemp OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber D/D information:
				Temperature in degree C"
			::= { fa10gEntry 47 }
			
		f10GFx1DDPWRMargin OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber D/D information:
				Power margin"
			::= { fa10gEntry 48 }

        f10GFx2DD OBJECT-TYPE
			SYNTAX  INTEGER {
						no(1),
						yes(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber2 Digital Diagnostic
				function:
				1:No
				2:Yes"
			::= { fa10gEntry 49 }

		f10GFx2DDVendor OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber2 D/D information:
				Vendor name"
			::= { fa10gEntry 50 }

		f10GFx2DDPartNo OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber2 D/D information:
				Vendor part number"
			::= { fa10gEntry 51 }

		f10GFx2DDFiberType OBJECT-TYPE
			SYNTAX  INTEGER{
						multi(1),
						single(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber2 D/D information:
				Fiber Type"
			::= { fa10gEntry 52 }
			
		f10GFx2DDWaveLen OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber2 D/D information:
				Wave length"
			::= { fa10gEntry 53 }

		f10GFx2DDWaveLen2 OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber2 D/D information:
				Wave length 2"
			::= { fa10gEntry 54 }

		f10GFx2DDLinkLen OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber2 D/D information:
				Link length"
			::= { fa10gEntry 55 }
			
		f10GFx2DDLenUnit OBJECT-TYPE
			SYNTAX  INTEGER{
						kilometer(1),
						meter(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber2 D/D information:
				Length Unit"
			::= { fa10gEntry 56}    
		
		f10GFx2DDStatus OBJECT-TYPE
			SYNTAX  INTEGER{
						no(1),
						yes(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber2 D/D information:
				Status Support"
			::= { fa10gEntry 57}
			
		f10GFx2DDRxSens OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber2 D/D information:
				Rx Sensitivity"
			::= { fa10gEntry 58 }

		f10GFx2DDTxPWR OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber2 D/D information:
				Tx power"
			::= { fa10gEntry 59 }

		f10GFx2DDRxPWR OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber2 D/D information:
				Rx power"
			::= { fa10gEntry 60 }
			
		f10GFx2DDTemp OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber2 D/D information:
				Temperature in degree C"
			::= { fa10gEntry 61 }
			
		f10GFx2DDPWRMargin OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber2 D/D information:
				Power margin"
			::= { fa10gEntry 62 }
			
		f10GFx3DD OBJECT-TYPE
			SYNTAX  INTEGER {
						no(1),
						yes(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber Digital Diagnostic
				function:
				1:No
				2:Yes"
			::= { fa10gEntry 63 }

		f10GFx3DDVendor OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber D/D information:
				Vendor name"
			::= { fa10gEntry 64 }

		f10GFx3DDPartNo OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber D/D information:
				Vendor part number"
			::= { fa10gEntry 65 }

		f10GFx3DDFiberType OBJECT-TYPE
			SYNTAX  INTEGER{
						multi(1),
						single(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber D/D information:
				Fiber Type"
			::= { fa10gEntry 66 }
			
		f10GFx3DDWaveLen OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber D/D information:
				Wave length"
			::= { fa10gEntry 67 }

		f10GFx3DDWaveLen2 OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber D/D information:
				Wave length 2"
			::= { fa10gEntry 68 }

		f10GFx3DDLinkLen OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber D/D information:
				Link length"
			::= { fa10gEntry 69 }
			
		f10GFx3DDLenUnit OBJECT-TYPE
			SYNTAX  INTEGER{
						kilometer(1),
						meter(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber D/D information:
				Length Unit"
			::= { fa10gEntry 70}    
		
		f10GFx3DDStatus OBJECT-TYPE
			SYNTAX  INTEGER{
						no(1),
						yes(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber D/D information:
				Status Support"
			::= { fa10gEntry 71 }
			
		f10GFx3DDRxSens OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber D/D information:
				Rx Sensitivity"
			::= { fa10gEntry 72 }

		f10GFx3DDTxPWR OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber D/D information:
				Tx power"
			::= { fa10gEntry 73 }

		f10GFx3DDRxPWR OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber D/D information:
				Rx power"
			::= { fa10gEntry 74 }
			
		f10GFx3DDTemp OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber D/D information:
				Temperature in degree C"
			::= { fa10gEntry 75 }
			
		f10GFx3DDPWRMargin OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"Local frm220A-10G card fiber D/D information:
				Power margin"
			::= { fa10gEntry 76 }
			
-- 1002ES Series 

fa1002esProject OBJECT IDENTIFIER ::= { faGswSnmp 4600 }
    
fa1002esCards  OBJECT IDENTIFIER ::= { fa1002esProject 1 }
         
	fa1002esTable OBJECT-TYPE
		SYNTAX      SEQUENCE OF Fa1002esEntry
		MAX-ACCESS  not-accessible
		STATUS      current
		DESCRIPTION
				"A list of  FRM220A-1002ES series card entries.
				The number of entries is fa1002es-No-L."
		::= { fa1002esCards 1 }

	fa1002esEntry OBJECT-TYPE
		SYNTAX      Fa1002esEntry
		MAX-ACCESS  not-accessible
		STATUS      current
		DESCRIPTION
				"An entry containing management information applicable
				to a particular  FRM220A-1002ES series card."
		INDEX   { gswChassisIndex, gswSlotIndex, gswSideIndex }
		::= {  fa1002esTable 1 } 

	Fa1002esEntry ::=
		SEQUENCE {  
				  gswSlotIndex		      	  INTEGER,
				  gswSideIndex		      	  INTEGER,
				  fa1002esCardHWVer		      DisplayString,
				  fa1002esCardFWVer		      DisplayString,
				  fa1002esCardCPLDVer	      DisplayString,
				  fa1002esCardFPGAVer	      DisplayString,
				  -- Fiber, 7 
				  fa1002esX1Link		      INTEGER,
				  fa1002esX2Link		      INTEGER,
				  fa1002esX1Active		      INTEGER,
				  fa1002esX2Active		      INTEGER,
				  fa1002esX1ALS				  INTEGER,
				  fa1002esX2ALS				  INTEGER,
				  fa1002esX1LBKTest		  	  INTEGER,
				  fa1002esX2LBKTest		  	  INTEGER,
				  fa1002esX1Speed			  INTEGER,
				  fa1002esX2Speed			  INTEGER,
				  fa1002esX1SFP		          INTEGER,
				  fa1002esX2SFP		          INTEGER,
				  fa1002esX1DD		          INTEGER,
				  fa1002esX2DD		          INTEGER,
				  -- Copper, 21
				  fa1002esU3Link		      INTEGER,				  
				  fa1002esU4Link		      INTEGER,
				  fa1002esU3Active		      INTEGER,
				  fa1002esU4Active		      INTEGER,
				  fa1002esU3Negotiation		  INTEGER,				  
				  fa1002esU4Negotiation		  INTEGER,
				  fa1002esU3Speed		      INTEGER,				  
				  fa1002esU4Speed		      INTEGER,
				  fa1002esU3Duplex		      INTEGER,				  
				  fa1002esU4Duplex		      INTEGER,
				  fa1002esU3SpeedStatus		  INTEGER,
				  fa1002esU4SpeedStatus		  INTEGER,
				  fa1002esU3DuplexStatus	  INTEGER,
				  fa1002esU4DuplexStatus	  INTEGER,
				  -- Rate Limit, 35
				  fa1002esX1IRL			      DisplayString,
				  fa1002esX2IRL			      DisplayString,
				  fa1002esU3IRL			      DisplayString,
				  fa1002esU4IRL			      DisplayString,
				  fa1002esX1ERL			      DisplayString,
				  fa1002esX2ERL			      DisplayString,
				  fa1002esU3ERL			      DisplayString,
				  fa1002esU4ERL			      DisplayString,
				  -- Link Loss Forwarding, 43
				  fa1002esX1LLFLogic			  INTEGER,
  				  fa1002esX1LLFPort2			  INTEGER,
  				  fa1002esX1LLFPort3			  INTEGER,
  				  fa1002esX1LLFPort4			  INTEGER,
   				  fa1002esX2LLFLogic			  INTEGER,
   				  fa1002esX2LLFPort1			  INTEGER,
   				  fa1002esX2LLFPort3			  INTEGER,
   				  fa1002esX2LLFPort4			  INTEGER,
  				  fa1002esU3LLFLogic			  INTEGER,
  				  fa1002esU3LLFPort1			  INTEGER,
  				  fa1002esU3LLFPort2			  INTEGER,
  				  fa1002esU3LLFPort4			  INTEGER,
    			  fa1002esU4LLFLogic			  INTEGER,
    			  fa1002esU4LLFPort1			  INTEGER,
    			  fa1002esU4LLFPort2			  INTEGER,
    			  fa1002esU4LLFPort3			  INTEGER,
                  -- Device, 59
				  fa1002esDeviceActive		  	  INTEGER,
				  fa1002esFlowCtrl			  	  INTEGER, 
				  fa1002esPortVLAN			  	  INTEGER,
   				  fa1002esX1VLANSts			  	  INTEGER,
  				  fa1002esX2VLANSts			  	  INTEGER,
  				  fa1002esU3VLANSts			  	  INTEGER,
  				  fa1002esU4VLANSts			  	  INTEGER,
  				  fa1002esSetToDefault		  	  INTEGER,
 				  fa1002esDeviceReset			  INTEGER,
                   -- RMON, 68 
 				  fa1002esClrRMONCnt			  INTEGER, 
				  fa1002esRMONX1In		      DisplayString,
				  fa1002esRMONX2In		      DisplayString,
				  fa1002esRMONU3In		      DisplayString,
				  fa1002esRMONU4In		      DisplayString,
				  fa1002esRMONX1Out		      DisplayString,
				  fa1002esRMONX2Out		      DisplayString,
				  fa1002esRMONU3Out		      DisplayString,
				  fa1002esRMONU4Out		      DisplayString,
                  -- SFP, 77
				  fa1002esX1VendorName		  DisplayString,
				  fa1002esX1VendorPartNo	  DisplayString,
				  fa1002esX1TxWaveLength		  Counter32,
				  fa1002esX1RxWaveLength		  Counter32,
				  fa1002esX1LinkLength		  Counter32,
				  fa1002esX1FiberType			  INTEGER,
				  fa1002esX1LengthUnit		  INTEGER,
				  fa1002esX1DDStatus			  INTEGER,
				  fa1002esX1TxPwr				  INTEGER,
				  fa1002esX1RxPwr				  INTEGER,
				  fa1002esX1RxSens			  INTEGER,
				  fa1002esX1Temp				  INTEGER,		  
				  fa1002esX2VendorName		  DisplayString,
				  fa1002esX2VendorPartNo		  DisplayString,
				  fa1002esX2TxWaveLength		  Counter32,
				  fa1002esX2RxWaveLength		  Counter32,
				  fa1002esX2LinkLength		  Counter32,
				  fa1002esX2FiberType			  INTEGER,
				  fa1002esX2LengthUnit		  INTEGER,
				  fa1002esX2DDStatus			  INTEGER,
				  fa1002esX2TxPwr				  INTEGER,
				  fa1002esX2RxPwr				  INTEGER,
				  fa1002esX2RxSens			  INTEGER,
				  fa1002esX2Temp				  INTEGER
	              -- END, 100            
	}
	
		gswSlotIndex OBJECT-TYPE
			SYNTAX  INTEGER (1..20)
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				"A unique value for each  card. 
				It is the slot location number."
			::= { fa1002esEntry 1 }  
			
		gswSideIndex OBJECT-TYPE
            SYNTAX  INTEGER {
                local(1),
                remote(2)
            }			
            MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A side
				1:Local
				2:Remote"
			::= { fa1002esEntry 2 }

		fa1002esCardHWVer OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card hardware version x.xxx"
			::= { fa1002esEntry 3 }

		fa1002esCardFWVer OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card firmware version x.xxx"
			::= { fa1002esEntry 4 }

		fa1002esCardCPLDVer OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card CPLD version x.xxx"
			::= { fa1002esEntry 5 }

		fa1002esCardFPGAVer OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card FPGA version x.xxx"
			::= { fa1002esEntry 6 }
			
		fa1002esX1Link OBJECT-TYPE
			SYNTAX  INTEGER {
						down(1),
						up(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, linking status of the fiber port2
				1:down
				2:up"
			::= { fa1002esEntry 7 }
			
		fa1002esX2Link OBJECT-TYPE
			SYNTAX  INTEGER {
						down(1),
						up(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, linking status of the fiber port2
				1:down
				2:up"
			::= { fa1002esEntry 8 }
   			
 		fa1002esX1Active OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port 1 active status
				1:disable
				2:enable"
			::= { fa1002esEntry 9 }
                                      
 		fa1002esX2Active OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port 2 active status
				1:disable
				2:enable"
			::= { fa1002esEntry 10 }

  		fa1002esX1ALS OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, port 1 ALS(Auto Laser Shutdown)
				1:disable
				2:enable"
			::= { fa1002esEntry 11 }

 		fa1002esX2ALS OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, port 2 ALS(Auto Laser Shutdown)
				1:disable
				2:enable"
			::= { fa1002esEntry 12 }

		fa1002esX1LBKTest OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, remote loop back testing of the fiber port1
				1:disable
				2:enable"
			::= { fa1002esEntry 13 }
			
		fa1002esX2LBKTest OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, remote loop back testing of the fiber port2
				1:disable
				2:enable"
			::= { fa1002esEntry 14 }
			
		fa1002esX1Speed OBJECT-TYPE
			SYNTAX  INTEGER {
						f1g(1),
						f100m(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port 1 speed
				1:1G full duplex
				2:100M full duplex"
			::= { fa1002esEntry 15 }

		fa1002esX2Speed OBJECT-TYPE
			SYNTAX  INTEGER {
						f1g(1),
						f100m(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port 2 speed
				1:1G full duplex
				2:100M full duplex"
			::= { fa1002esEntry 16 }
							  
		fa1002esX1SFP OBJECT-TYPE
			SYNTAX  INTEGER {
						no(1),
						yes(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, SFP information of the fiber port1
				1:no
				2:yes"
			::= { fa1002esEntry 17 }
			
		fa1002esX2SFP OBJECT-TYPE
			SYNTAX  INTEGER {
						no(1),
						yes(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, SFP information of the fiber port2
				1:no
				2:yes"
			::= { fa1002esEntry 18 }
			
		fa1002esX1DD OBJECT-TYPE
			SYNTAX  INTEGER {
						no(1),
						yes(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, D/D function of the fiber port1
				1:no
				2:yes"
			::= { fa1002esEntry 19 }
			
		fa1002esX2DD OBJECT-TYPE
			SYNTAX  INTEGER {
						no(1),
						yes(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, D/D function of the fiber port2
				1:no
				2:yes"
			::= { fa1002esEntry 20 }
	
		fa1002esU3Link OBJECT-TYPE
			SYNTAX  INTEGER {
						down(1),
						up(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, linking status of the utp port3
				1:up
				2:down"
			::= { fa1002esEntry 21 }

		fa1002esU4Link OBJECT-TYPE
			SYNTAX  INTEGER {
						down(1),
						up(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, linking status of the utp port4
				1:up
				2:down"
			::= { fa1002esEntry 22 }  
			
  		fa1002esU3Active OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, copper port 3 active status
				1:disable
				2:enable"
			::= { fa1002esEntry 23 }
                                      
 		fa1002esU4Active OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, copper port 4 active status
				1:disable
				2:enable"
			::= { fa1002esEntry 24 }

		fa1002esU3Negotiation OBJECT-TYPE
			SYNTAX  INTEGER {
						manaual(1),
						auto(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, negotiation status of the utp port3
				1:manaual
				2:auto"
			::= { fa1002esEntry 25 } 
			
		fa1002esU4Negotiation OBJECT-TYPE
			SYNTAX  INTEGER {
						manaual(1),
						auto(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, negotiation status of the utp port4
				1:manaual
				2:auto"
			::= { fa1002esEntry 26 }
			
		fa1002esU3Speed OBJECT-TYPE
			SYNTAX  INTEGER {
						f10BaseT(1),
						f100BaseTX(2),
						f1000BaseTX(3)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, speed status of the utp port3
				1:10Base-T(1)
				2:100Base-TX(2)
				3:1000Base-TX(3)"
			::= { fa1002esEntry 27 }

		fa1002esU4Speed OBJECT-TYPE
			SYNTAX  INTEGER {
						f10BaseT(1),
						f100BaseTX(2),
						f1000BaseTX(3)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, speed status of the utp port4
				1:10Base-T(1)
				2:100Base-TX(2)
				3:1000Base-TX(3)"
			::= { fa1002esEntry 28 }

		fa1002esU3Duplex OBJECT-TYPE
			SYNTAX  INTEGER {
						half(1),
						full(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, duplex status of the utp port3
				1:half
				2:full"
			::= { fa1002esEntry 29 }

		fa1002esU4Duplex OBJECT-TYPE
			SYNTAX  INTEGER {
						half(1),
						full(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, duplex status of the utp port4
				1:half
				2:full"
			::= { fa1002esEntry 30 }
			
		fa1002esU3SpeedStatus OBJECT-TYPE
			SYNTAX  INTEGER {
						f10m(1),
						f100m(2),
						f1g(3)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, UTP port 3 speed
				1:10M
				2:100M
				3:1G"
			::= { fa1002esEntry 31 }
			
		fa1002esU4SpeedStatus OBJECT-TYPE
			SYNTAX  INTEGER {
						f10m(1),
						f100m(2),
						f1g(3)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, UTP port 4 speed
				1:10M
				2:100M
				3:1G"
			::= { fa1002esEntry 32 }

		fa1002esU3DuplexStatus OBJECT-TYPE
			SYNTAX  INTEGER {
						half(1),
						full(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, UTP port 3 duplex
				1:half
				2:full"
			::= { fa1002esEntry 33 }

		fa1002esU4DuplexStatus OBJECT-TYPE
			SYNTAX  INTEGER {
						half(1),
						full(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, UTP port 4 duplex
				1:half
				2:full"
			::= { fa1002esEntry 34 }		
			
		fa1002esX1IRL OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "FRM220A-1002ES Series card, 1 Ingress Rate Limit:                 
                 0 = Unlimit
                 input format: 64k(K),100m(M),100
                 If doesn't input the unit, the default was Mega.            
                 Limite Rate : 64K ~ 990M
                "
			::= { fa1002esEntry 35 }

		fa1002esX2IRL OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "FRM220A-1002ES Series card, 2 Ingress Rate Limit:                 
                 0 = Unlimit
                 input format: 64k(K),100m(M),100
                 If doesn't input the unit, the default was Mega.            
                 Limite Rate : 64K ~ 990M
                "
			::= { fa1002esEntry 36 }

		fa1002esU3IRL OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "FRM220A-1002ES Series card, utp 3 Ingress Rate Limit:                 
                 0 = Unlimit
                 input format: 64k(K),100m(M),100
                 If doesn't input the unit, the default was Mega.            
                 Limite Rate : 64K ~ 990M
                "
			::= { fa1002esEntry 37 }

		fa1002esU4IRL OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "FRM220A-1002ES Series card, utp 4 Ingress Rate Limit:                 
                 0 = Unlimit
                 input format: 64k(K),100m(M),100
                 If doesn't input the unit, the default was Mega.            
                 Limite Rate : 64K ~ 990M
                "
			::= { fa1002esEntry 38 }

		fa1002esX1ERL OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "FRM220A-1002ES Series card, fiber 1 Egress Rate Limit:                 
                 0 = Unlimit
                 input format: 64k(K),100m(M),100
                 If doesn't input the unit, the default was Mega.            
                 Limite Rate : 64K ~ 990M
                "
			::= { fa1002esEntry 39 }

		fa1002esX2ERL OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "FRM220A-1002ES Series card, fiber 2 Egress Rate Limit:                 
                 0 = Unlimit
                 input format: 64k(K),100m(M),100
                 If doesn't input the unit, the default was Mega.            
                 Limite Rate : 64K ~ 990M
                "
			::= { fa1002esEntry 40 }

		fa1002esU3ERL OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "FRM220A-1002ES Series card, utp 3 Egress Rate Limit:                 
                 0 = Unlimit
                 input format: 64k(K),100m(M),100
                 If doesn't input the unit, the default was Mega.            
                 Limite Rate : 64K ~ 990M
                "
			::= { fa1002esEntry 41 }

		fa1002esU4ERL OBJECT-TYPE
            SYNTAX  DisplayString
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "FRM220A-1002ES Series card, utp 4 Egress Rate Limit:                 
                 0 = Unlimit
                 input format: 64k(K),100m(M),100
                 If doesn't input the unit, the default was Mega.            
                 Limite Rate : 64K ~ 990M
                "
			::= { fa1002esEntry 42 }
			
		fa1002esX1LLFLogic OBJECT-TYPE
			SYNTAX  INTEGER {
						and(1),
						or(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port 1 Link Loss Forwarding 
				depends boolean logic:
				1:and
				2:or"
			::= { fa1002esEntry 43 }
						
		fa1002esX1LLFPort2 OBJECT-TYPE
			SYNTAX  INTEGER {
						dont-care(1),
						selected(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port 1 Link Loss Forwarding 
				depends on port 2 fiber rx link:
				1:don't care
				2:selected"
			::= { fa1002esEntry 44 }
		
		fa1002esX1LLFPort3 OBJECT-TYPE
			SYNTAX  INTEGER {
						dont-care(1),
						selected(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port 1 Link Loss Forwarding 
				depends on port 3 ethernet rx link:
				1:don't care
				2:selected"
			::= { fa1002esEntry 45 }

		
		fa1002esX1LLFPort4 OBJECT-TYPE
			SYNTAX  INTEGER {
						dont-care(1),
						selected(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port 1 Link Loss Forwarding 
				depends on port 4 ethernet rx link:
				1:don't care
				2:selected"
			::= { fa1002esEntry 46 }

		fa1002esX2LLFLogic OBJECT-TYPE
			SYNTAX  INTEGER {
						and(1),
						or(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port 2 Link Loss Forwarding 
				depends boolean logic:
				1:and
				2:or"
			::= { fa1002esEntry 47 }
						
		fa1002esX2LLFPort1 OBJECT-TYPE
			SYNTAX  INTEGER {
						dont-care(1),
						selected(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port 2 Link Loss Forwarding 
				depends on port 1 fiber rx link:
				1:don't care
				2:selected"
			::= { fa1002esEntry 48 }
		
		fa1002esX2LLFPort3 OBJECT-TYPE
			SYNTAX  INTEGER {
						dont-care(1),
						selected(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port 2 Link Loss Forwarding 
				depends on port 3 ethernet rx link:
				1:don't care
				2:selected"
			::= { fa1002esEntry 49 }
		
		fa1002esX2LLFPort4 OBJECT-TYPE
			SYNTAX  INTEGER {
						dont-care(1),
						selected(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port 2 Link Loss Forwarding 
				depends on port 4 ethernet rx link:
				1:don't care
				2:selected"
			::= { fa1002esEntry 50 }				

		fa1002esU3LLFLogic OBJECT-TYPE
			SYNTAX  INTEGER {
						and(1),
						or(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, ethernet port 3 Link Loss Forwarding 
				depends boolean logic:
				1:and
				2:or"
			::= { fa1002esEntry 51 }
						
		fa1002esU3LLFPort1 OBJECT-TYPE
			SYNTAX  INTEGER {
						dont-care(1),
						selected(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, ethernet port 3 Link Loss Forwarding 
				depends on port 1 fiber rx link:
				1:don't care
				2:selected"
			::= { fa1002esEntry 52 }			

		fa1002esU3LLFPort2 OBJECT-TYPE
			SYNTAX  INTEGER {
						dont-care(1),
						selected(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, ethernet port 3 Link Loss Forwarding 
				depends on port 2 fiber rx link:
				1:don't care
				2:selected"
			::= { fa1002esEntry 53 }
 
 		fa1002esU3LLFPort4 OBJECT-TYPE
			SYNTAX  INTEGER {
						dont-care(1),
						selected(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, ethernet port 3 Link Loss Forwarding 
				depends on port 4 fiber rx link:
				1:don't care
				2:selected"
			::= { fa1002esEntry 54 }
			
		fa1002esU4LLFLogic OBJECT-TYPE
			SYNTAX  INTEGER {
						and(1),
						or(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, ethernet port 4 Link Loss Forwarding 
				depends boolean logic:
				1:and
				2:or"
			::= { fa1002esEntry 55 }
						
		fa1002esU4LLFPort1 OBJECT-TYPE
			SYNTAX  INTEGER {
						dont-care(1),
						selected(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, ethernet port 4 Link Loss Forwarding 
				depends on port 1 fiber rx link:
				1:don't care
				2:selected"
			::= { fa1002esEntry 56 }			

		fa1002esU4LLFPort2 OBJECT-TYPE
			SYNTAX  INTEGER {
						dont-care(1),
						selected(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, ethernet port 4 Link Loss Forwarding 
				depends on port 2 fiber rx link:
				1:don't care
				2:selected"
			::= { fa1002esEntry 57 }
 
		fa1002esU4LLFPort3 OBJECT-TYPE
			SYNTAX  INTEGER {
						dont-care(1),
						selected(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, ethernet port 4 Link Loss Forwarding 
				depends on port 3 fiber rx link:
				1:don't care
				2:selected"
			::= { fa1002esEntry 58 }
			
		fa1002esDeviceActive OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, device active status
				1:disable
				2:enable"
			::= { fa1002esEntry 59 }
			
		fa1002esFlowCtrl OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, device flow control
				1:disable
				2:enable"
			::= { fa1002esEntry 60 }
			
 		fa1002esPortVLAN OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, port VLAN(Port1 ~ Port4)
				1:disable
				2:enable"
			::= { fa1002esEntry 61 }

		fa1002esX1VLANSts OBJECT-TYPE
			SYNTAX  INTEGER {
						groupA(1),
						groupB(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port 1 vlan status
				1:group A
				2:group B"
			::= { fa1002esEntry 62 }
			
		fa1002esX2VLANSts OBJECT-TYPE
			SYNTAX  INTEGER {
						groupA(1),
						groupB(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port 2 vlan status
				1:group A
				2:group B"
			::= { fa1002esEntry 63 }

		fa1002esU3VLANSts OBJECT-TYPE
			SYNTAX  INTEGER {
						groupA(1),
						groupB(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, ehernet port 3 vlan status
				1:group A
				2:group B"
			::= { fa1002esEntry 64 }   
			
		fa1002esU4VLANSts OBJECT-TYPE
			SYNTAX  INTEGER {
						groupA(1),
						groupB(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, ehernet port 4 vlan status
				1:group A
				2:group B"
			::= { fa1002esEntry 65 }
			       
		fa1002esSetToDefault OBJECT-TYPE
			SYNTAX  INTEGER {
						noaction(1),
						action(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, set to default
				1:noaction
				2:action"
			::= { fa1002esEntry 66 }

		fa1002esDeviceReset OBJECT-TYPE
			SYNTAX  INTEGER {
						noaction(1),
						action(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, device reset(trigger)
				1:no action
				2:action"
			::= { fa1002esEntry 67 }
			
 		fa1002esClrRMONCnt OBJECT-TYPE
			SYNTAX  INTEGER {
						noaction(1),
						action(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, clear RMON IN/OUT counter(trigger)
				1:no action
				2:action"
			::= { fa1002esEntry 68 }		
			
		fa1002esRMONX1In OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS read-only  
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port1 ingress RMON counter "
			::= { fa1002esEntry 69 }

		fa1002esRMONX2In OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port1 ingress RMON counter "
			::= { fa1002esEntry 70 }

		fa1002esRMONU3In OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, ethernet port3 ingress RMON counter "
			::= { fa1002esEntry 71 }
 
 		fa1002esRMONU4In OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, ethernet port4 ingress RMON counter "
			::= { fa1002esEntry 72 }

		fa1002esRMONX1Out OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port2 egress RMON counter "
			::= { fa1002esEntry 73 }

		fa1002esRMONX2Out OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port2 egress RMON counter "
			::= { fa1002esEntry 74 }

		fa1002esRMONU3Out OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, ethernet port3 egress RMON counter "
			::= { fa1002esEntry 75 }

		fa1002esRMONU4Out OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, ethernet port4 egress RMON counter "
			::= { fa1002esEntry 76 }
	
 		fa1002esX1VendorName OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port1 vendor name "
			::= { fa1002esEntry 77 }	
    
 		fa1002esX1VendorPartNo OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port2 vendor Part No "
			::= { fa1002esEntry 78 }	
			
 		fa1002esX1TxWaveLength OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port2 TX wave length "
			::= { fa1002esEntry 79 }	

 		fa1002esX1RxWaveLength OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port2 RX wave length "
			::= { fa1002esEntry 80 }
			
 		fa1002esX1LinkLength OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port2 link length "
			::= { fa1002esEntry 81 }

 		fa1002esX1FiberType OBJECT-TYPE
			SYNTAX  INTEGER {
						multi(1),
						single(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port2 type 
				1:multi
				2:single"
			::= { fa1002esEntry 82 }   
			
 		fa1002esX1LengthUnit OBJECT-TYPE
			SYNTAX  INTEGER {
						km(1),
						m(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port2 link length unit 
				1:kilometer
				2:meter"
			::= { fa1002esEntry 83 }  
	
 		fa1002esX1DDStatus OBJECT-TYPE
			SYNTAX  INTEGER {
						no(1),
						yes(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port2 D/D status 
				1:no
				2:yes"
			::= { fa1002esEntry 84 } 
								
 		fa1002esX1TxPwr OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port2 TX power(dBM) "
			::= { fa1002esEntry 85 }
    
  		fa1002esX1RxPwr OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port2 RX power(dBM) "
			::= { fa1002esEntry 86 }
    
   		fa1002esX1RxSens OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port2 RX sensitivity(dBM) "
			::= { fa1002esEntry 87 }
   
   		fa1002esX1Temp OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port2 temperature(degree C) "
			::= { fa1002esEntry 88 }
			
 		fa1002esX2VendorName OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port2 vendor name "
			::= { fa1002esEntry 89 }	
    
 		fa1002esX2VendorPartNo OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port2 vendor Part No "
			::= { fa1002esEntry 90 }	
			
 		fa1002esX2TxWaveLength OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port2 TX wave length "
			::= { fa1002esEntry 91 }	

 		fa1002esX2RxWaveLength OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port2 RX wave length "
			::= { fa1002esEntry 92 }
			
 		fa1002esX2LinkLength OBJECT-TYPE
			SYNTAX  Counter32
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port2 link length "
			::= { fa1002esEntry 93 }

 		fa1002esX2FiberType OBJECT-TYPE
			SYNTAX  INTEGER {
						multi(1),
						single(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port2 type 
				1:multi
				2:single"
			::= { fa1002esEntry 94 }   
			
 		fa1002esX2LengthUnit OBJECT-TYPE
			SYNTAX  INTEGER {
						km(1),
						m(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port2 link length unit 
				1:kilometer
				2:meter"
			::= { fa1002esEntry 95 }  
	
 		fa1002esX2DDStatus OBJECT-TYPE
			SYNTAX  INTEGER {
						no(1),
						yes(2)
					}
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port2 D/D status 
				1:no
				2:yes"
			::= { fa1002esEntry 96 } 
								
 		fa1002esX2TxPwr OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port2 TX power(dBM) "
			::= { fa1002esEntry 97 }
    
  		fa1002esX2RxPwr OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port2 RX power(dBM) "
			::= { fa1002esEntry 98 }
    
   		fa1002esX2RxSens OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port2 RX sensitivity(dBM) "
			::= { fa1002esEntry 99 }
   
   		fa1002esX2Temp OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, fiber port2 temperature(degree C) "
			::= { fa1002esEntry 100 }
			    
	fa1002esVLANTable OBJECT-TYPE
		SYNTAX      SEQUENCE OF Fa1002esVLANEntry
		MAX-ACCESS  not-accessible
		STATUS      current
		DESCRIPTION
				"A list of  FRM220A-1002ES series card entries.
				The number of entries is fa1002es-No-L."
		::= { fa1002esCards 2 }

	fa1002esVLANEntry OBJECT-TYPE
		SYNTAX      Fa1002esVLANEntry
		MAX-ACCESS  not-accessible
		STATUS      current
		DESCRIPTION
				"An entry containing VLAN management information applicable
				to a particular  FRM220A-1002ES series card."
		INDEX   { gswChassisIndex, gswSlotIndex, gswSideIndex }
		::= {  fa1002esVLANTable 1 } 

	Fa1002esVLANEntry ::=
		SEQUENCE {  
				  fa1002es1QVLAN			  INTEGER,
				  fa1002esTagType				  DisplayString,
				  fa1002esP1VID				  INTEGER,
				  fa1002esP2VID				  INTEGER,
				  fa1002esP3VID				  INTEGER,
				  fa1002esP4VID				  INTEGER,
				  fa1002esP1QinQ				  INTEGER,
				  fa1002esP2QinQ				  INTEGER,
				  fa1002esP3QinQ				  INTEGER,
				  fa1002esP4QinQ				  INTEGER,
	              fa1002es1QVLANCreate		  	  INTEGER,
	              fa1002es1QVLANDelete		  	  INTEGER,
	              fa1002es1QVLANClear			  INTEGER,
	              fa1002es1QVLANReset			  INTEGER,
	              -- VLAN Table, 15				  
				  fa1002esTable1VID			  	  INTEGER,
	              fa1002esTable1P1Status		  INTEGER,
	              fa1002esTable1P2Status		  INTEGER,
	              fa1002esTable1P3Status		  INTEGER,
	              fa1002esTable1P4Status		  INTEGER,
				  fa1002esTable2VID			  INTEGER,
	              fa1002esTable2P1Status		  INTEGER,
	              fa1002esTable2P2Status		  INTEGER,
	              fa1002esTable2P3Status		  INTEGER,
	              fa1002esTable2P4Status		  INTEGER,
				  fa1002esTable3VID			  INTEGER,
	              fa1002esTable3P1Status		  INTEGER,
	              fa1002esTable3P2Status		  INTEGER,
	              fa1002esTable3P3Status		  INTEGER,
	              fa1002esTable3P4Status		  INTEGER,
				  fa1002esTable4VID			  INTEGER,
	              fa1002esTable4P1Status		  INTEGER,
	              fa1002esTable4P2Status		  INTEGER,
	              fa1002esTable4P3Status		  INTEGER,
	              fa1002esTable4P4Status		  INTEGER,  
				  fa1002esTable5VID			  INTEGER,
	              fa1002esTable5P1Status		  INTEGER,
	              fa1002esTable5P2Status		  INTEGER,
	              fa1002esTable5P3Status		  INTEGER,
	              fa1002esTable5P4Status		  INTEGER,
				  fa1002esTable6VID			  INTEGER,
	              fa1002esTable6P1Status		  INTEGER,
	              fa1002esTable6P2Status		  INTEGER,
	              fa1002esTable6P3Status		  INTEGER,
	              fa1002esTable6P4Status		  INTEGER,
				  fa1002esTable7VID			  INTEGER,
	              fa1002esTable7P1Status		  INTEGER,
	              fa1002esTable7P2Status		  INTEGER,
	              fa1002esTable7P3Status		  INTEGER,
	              fa1002esTable7P4Status		  INTEGER,
				  fa1002esTable8VID			  INTEGER,
	              fa1002esTable8P1Status		  INTEGER,
	              fa1002esTable8P2Status		  INTEGER,
	              fa1002esTable8P3Status		  INTEGER,
	              fa1002esTable8P4Status		  INTEGER,
				  fa1002esTable9VID			  INTEGER,
	              fa1002esTable9P1Status		  INTEGER,
	              fa1002esTable9P2Status		  INTEGER,
	              fa1002esTable9P3Status		  INTEGER,
	              fa1002esTable9P4Status		  INTEGER,
				  fa1002esTable10VID			  INTEGER,
	              fa1002esTable10P1Status		  INTEGER,
	              fa1002esTable10P2Status		  INTEGER,
	              fa1002esTable10P3Status		  INTEGER,
	              fa1002esTable10P4Status		  INTEGER,
				  fa1002esTable11VID			  INTEGER,
	              fa1002esTable11P1Status		  INTEGER,
	              fa1002esTable11P2Status		  INTEGER,
	              fa1002esTable11P3Status		  INTEGER,
	              fa1002esTable11P4Status		  INTEGER,
				  fa1002esTable12VID			  INTEGER,
	              fa1002esTable12P1Status		  INTEGER,
	              fa1002esTable12P2Status		  INTEGER,
	              fa1002esTable12P3Status		  INTEGER,
	              fa1002esTable12P4Status		  INTEGER,  
				  fa1002esTable13VID			  INTEGER,
	              fa1002esTable13P1Status		  INTEGER,
	              fa1002esTable13P2Status		  INTEGER,
	              fa1002esTable13P3Status		  INTEGER,
	              fa1002esTable13P4Status		  INTEGER,
				  fa1002esTable14VID			  INTEGER,
	              fa1002esTable14P1Status		  INTEGER,
	              fa1002esTable14P2Status		  INTEGER,
	              fa1002esTable14P3Status		  INTEGER,
	              fa1002esTable14P4Status		  INTEGER,
				  fa1002esTable15VID			  INTEGER,
	              fa1002esTable15P1Status		  INTEGER,
	              fa1002esTable15P2Status		  INTEGER,
	              fa1002esTable15P3Status		  INTEGER,
	              fa1002esTable15P4Status		  INTEGER,
				  fa1002esTable16VID			  INTEGER,
	              fa1002esTable16P1Status		  INTEGER,
	              fa1002esTable16P2Status		  INTEGER,
	              fa1002esTable16P3Status		  INTEGER,
	              fa1002esTable16P4Status		  INTEGER	                          
		}
			              
	    fa1002es1QVLAN OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, 802.1Q VLAN
				1:disable
				2:enable"
			::= { fa1002esVLANEntry 1 }
			
   		fa1002esTagType  OBJECT-TYPE
			SYNTAX  DisplayString
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, tag type(HEX) "
			::= { fa1002esVLANEntry 2 }

					
   		fa1002esP1VID	 OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, port1 VLAN ID "
			::= { fa1002esVLANEntry 3 }

   		fa1002esP2VID	 OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, port2 VLAN ID "
			::= { fa1002esVLANEntry 4 } 
			
   		fa1002esP3VID	 OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, port3 VLAN ID "
			::= { fa1002esVLANEntry 5 }  
			
   		fa1002esP4VID	 OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, port4 VLAN ID "
			::= { fa1002esVLANEntry 6 }
					
   		fa1002esP1QinQ	 OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, port1 QinQ support 
				1:disable
				2:enable "    
			::= { fa1002esVLANEntry 7 }

   		fa1002esP2QinQ	 OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, port1 QinQ support 
				1:disable
				2:enable "   			
			::= { fa1002esVLANEntry 8 } 
			
   		fa1002esP3QinQ	 OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, port1 QinQ support 
				1:disable
				2:enable "   			
			::= { fa1002esVLANEntry 9 }  
			
   		fa1002esP4QinQ OBJECT-TYPE
			SYNTAX  INTEGER {
						disable(1),
						enable(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, port1 QinQ support 
				1:disable
				2:enable "   
			::= { fa1002esVLANEntry 10 }
			
		fa1002es1QVLANCreate	 OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, create the VLAN ID(1~4094) "
			::= { fa1002esVLANEntry 11 }
			
   		fa1002es1QVLANDelete	 OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, delete the VLAN ID "
			::= { fa1002esVLANEntry 12 }
		
		fa1002es1QVLANClear OBJECT-TYPE
			SYNTAX  INTEGER {
						noaction(1),
						action(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, clear VLAN table(trigger)
				1:no action
				2:action"
			::= { fa1002esVLANEntry 13 }

			
		fa1002es1QVLANReset OBJECT-TYPE
			SYNTAX  INTEGER {
						noaction(1),
						action(2)
					}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, reset all VLAN parameters(trigger)
				1:no action
				2:action"
			::= { fa1002esVLANEntry 14 }

   		fa1002esTable1VID  OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 1 VLAN ID 
				 Operation 0:delete, 1~4094:create or modify
				 Note: The VLAN ID must be created by order."

			::= { fa1002esVLANEntry 15 }

   		fa1002esTable1P1Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}

			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 1 port 1 status
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 16 }

   		fa1002esTable1P2Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 1 port 2 status
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 17 }

   		fa1002esTable1P3Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 1 port 3 status
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 18 }

   		fa1002esTable1P4Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}

			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 1 port 4 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 19 }
			
   		fa1002esTable2VID  OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 2 VLAN ID 
				 Operation 0:delete, 1~4094:create or modify
				 Note: The VLAN ID must be created by order."

			::= { fa1002esVLANEntry 20 }

   		fa1002esTable2P1Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 2 port 1 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 21 }

   		fa1002esTable2P2Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 2 port 2 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 22 }

   		fa1002esTable2P3Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 2 port 3 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 23 }

   		fa1002esTable2P4Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}

			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 2 port 4 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 24 }
			
   		fa1002esTable3VID  OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 3 VLAN ID 
				 Operation 0:delete, 1~4094:create or modify
				 Note: The VLAN ID must be created by order."

			::= { fa1002esVLANEntry 25 }

   		fa1002esTable3P1Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 3 port 1 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 26 }

   		fa1002esTable3P2Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}

			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 3 port 2 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 27 }

   		fa1002esTable3P3Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}

			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 3 port 3 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 28 }

   		fa1002esTable3P4Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}

			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 3 port 4 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 29 }

   		fa1002esTable4VID  OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 4 VLAN ID 
				 Operation 0:delete, 1~4094:create or modify
				 Note: The VLAN ID must be created by order."

			::= { fa1002esVLANEntry 30 }

   		fa1002esTable4P1Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}

			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 4 port 1 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 31 }

   		fa1002esTable4P2Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 4 port 2 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 32 }

   		fa1002esTable4P3Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 4 port 3 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 33 }

   		fa1002esTable4P4Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 4 port 4 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 34 }

   		fa1002esTable5VID  OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 5 VLAN ID 
				 Operation 0:delete, 1~4094:create or modify
				 Note: The VLAN ID must be created by order."

			::= { fa1002esVLANEntry 35 }

   		fa1002esTable5P1Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}

			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 5 port 1 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 36 }

   		fa1002esTable5P2Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}

			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 5 port 2 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 37 }

   		fa1002esTable5P3Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 5 port 3 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 38 }

   		fa1002esTable5P4Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 5 port 4 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 39 }

   		fa1002esTable6VID  OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 6 VLAN ID 
				 Operation 0:delete, 1~4094:create or modify
				 Note: The VLAN ID must be created by order."

			::= { fa1002esVLANEntry 40 }

   		fa1002esTable6P1Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}

			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 6 port 1 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 41 }

   		fa1002esTable6P2Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}

			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 6 port 2 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 42 }

   		fa1002esTable6P3Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 6 port 3 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 43 }

   		fa1002esTable6P4Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}

			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 6 port 4 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 44 }

   		fa1002esTable7VID  OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 7 VLAN ID 
				 Operation 0:delete, 1~4094:create or modify
				 Note: The VLAN ID must be created by order."

			::= { fa1002esVLANEntry 45 }

   		fa1002esTable7P1Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}

			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 7 port 1 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 46 }

   		fa1002esTable7P2Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 7 port 2 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 47 }

   		fa1002esTable7P3Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}

			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 7 port 3 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 48 }

   		fa1002esTable7P4Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 7 port 4 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 49 }

   		fa1002esTable8VID  OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 8 VLAN ID 
				 Operation 0:delete, 1~4094:create or modify
				 Note: The VLAN ID must be created by order."

			::= { fa1002esVLANEntry 50 }

   		fa1002esTable8P1Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 8 port 1 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 51 }

   		fa1002esTable8P2Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 8 port 2 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 52 }

   		fa1002esTable8P3Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 8 port 3 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 53 }

   		fa1002esTable8P4Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 8 port 4 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 54 }

   		fa1002esTable9VID  OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 9 VLAN ID 
				 Operation 0:delete, 1~4094:create or modify
				 Note: The VLAN ID must be created by order."

			::= { fa1002esVLANEntry 55 }

   		fa1002esTable9P1Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 9 port 1 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 56 }

   		fa1002esTable9P2Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 9 port 2 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 57 }

   		fa1002esTable9P3Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 9 port 3 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 58 }

   		fa1002esTable9P4Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}

			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 9 port 4 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 59 }

   		fa1002esTable10VID  OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 10 VLAN ID 
				 Operation 0:delete, 1~4094:create or modify
				 Note: The VLAN ID must be created by order."

			::= { fa1002esVLANEntry 60 }

   		fa1002esTable10P1Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 10 port 1 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 61 }

   		fa1002esTable10P2Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 10 port 2 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 62 }

   		fa1002esTable10P3Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}

			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 10 port 3 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 63 }

   		fa1002esTable10P4Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 10 port 4 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 64 }

   		fa1002esTable11VID  OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 11 VLAN ID 
				 Operation 0:delete, 1~4094:create or modify
				 Note: The VLAN ID must be created by order."

			::= { fa1002esVLANEntry 65 }

   		fa1002esTable11P1Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}

			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 11 port 1 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 66 }

   		fa1002esTable11P2Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
		
		MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 11 port 2 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 67 }

   		fa1002esTable11P3Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 11 port 3 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 68 }

   		fa1002esTable11P4Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 11 port 4 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 69 }

   		fa1002esTable12VID  OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 12 VLAN ID 
				 Operation 0:delete, 1~4094:create or modify
				 Note: The VLAN ID must be created by order."

			::= { fa1002esVLANEntry 70 }

   		fa1002esTable12P1Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}

			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 12 port 1 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 71 }

   		fa1002esTable12P2Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 12 port 2 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 72 }

   		fa1002esTable12P3Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 12 port 3 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 73 }

   		fa1002esTable12P4Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}

			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 12 port 4 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 74 }
 
   		fa1002esTable13VID  OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 13 VLAN ID 
				 Operation 0:delete, 1~4094:create or modify
				 Note: The VLAN ID must be created by order."

			::= { fa1002esVLANEntry 75 }

   		fa1002esTable13P1Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 13 port 1 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 76 }

   		fa1002esTable13P2Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 13 port 2 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 77 }

   		fa1002esTable13P3Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 13 port 3 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 78 }

   		fa1002esTable13P4Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 13 port 4 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 79 }
			
   		fa1002esTable14VID  OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 14 VLAN ID 
				 Operation 0:delete, 1~4094:create or modify
				 Note: The VLAN ID must be created by order."

			::= { fa1002esVLANEntry 80 }

   		fa1002esTable14P1Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 14 port 1 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 81 }

   		fa1002esTable14P2Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 14 port 2 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 82 }

   		fa1002esTable14P3Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 14 port 3 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 83 }

   		fa1002esTable14P4Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 14 port 4 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 84 }

   		fa1002esTable15VID  OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 15 VLAN ID 
				 Operation 0:delete, 1~4094:create or modify
				 Note: The VLAN ID must be created by order."

			::= { fa1002esVLANEntry 85 }

   		fa1002esTable15P1Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 15 port 1 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 86 }

   		fa1002esTable15P2Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}

			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 15 port 2 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 87 }

   		fa1002esTable15P3Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 15 port 3 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 88 }

   		fa1002esTable15P4Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 15 port 4 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 89 }

   		fa1002esTable16VID  OBJECT-TYPE
			SYNTAX  INTEGER
			MAX-ACCESS  read-only
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 16 VLAN ID 
				 Operation 0:delete, 1~4094:create or modify
				 Note: The VLAN ID must be created by order."


			::= { fa1002esVLANEntry 90 }

   		fa1002esTable16P1Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 16 port 1 status
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 91 }

   		fa1002esTable16P2Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 16 port 2 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 92 }

   		fa1002esTable16P3Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 16 port 3 status 
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 93 }

   		fa1002esTable16P4Status  OBJECT-TYPE
			SYNTAX  INTEGER {
				unmodify(1),
				untagged(2),
				tagged(3),
				nonmember(4)
			}
			MAX-ACCESS  read-write
			STATUS  current
			DESCRIPTION
				" FRM220A-1002ES Series card, table 16 port 4 status
				1:Unmodify
				2:Untagged
				3:Tagged
				4:Nonmember"

			::= { fa1002esVLANEntry 94 }
  														 					             
END
  
