The FRM220 is a 2U high 19" Rack, 20 slot modular media converter rack. Technologies Supported: ► 10G, 2.7G 3R Transponder ► Gigabit Ethernet Converter ► Fast Ethernet Converter ► Fiber Multiplexer ► POTS Fiber Converter ► Fiber Repeater ► E1/T1 Fiber Modem ► V35/X21/RS530 Fiber Modem ► Serial RS485/422 Fiber Converter

The FRM220-10G is a series of managed 10G fiber to fiber 3R repeater and transponders. Based on a number of 10 Gigabit Fiber standards, these transponders support XFP to XFP (XX), SFP+ to XFP (SX), or SFP+ to SFP+ (SS) fiber connections.

The FRM220-2.7G-2S is a 2.7G 3R optical regeneration device, which consists of Re-amplification, Re-shaping and Re-timing. The transponder card converts a data signal to the correct wavelength for transmission on a specific channel by supporting SFP optics on both line side and client side interfaces.

The FRM220-2.7G-3S is a 3R 2.7G optical regeneration device, which consists of Re-amplification, Re-shaping and Re-timing. The transponder card converts a data signal to the correct wavelength for transmission on a specific channel by supporting SFP optics on both line side and client side interfaces. 1+1 Automatic optical line Protection Switching are supported for the aggregate fiber ports.

The FRM220-155MS is a fiber to fiber optical media converter and repeater that allows data rates up to 155Mbps. FRM220-155MS supports 2R regeneration, which consists of re-amplification and reshaping. This converter is compatible with fiber interfaces such as 100Mbps Fast Ethernet, 155Mbps STM1 and OC3.

The FRM220-1000EAS is an IEEE802.3ah OAM compliant dual copper to dual fiber Gigabit Ethernet solution designed to make conversion between 10/100/1000Base-TX and 1000Base-SX/LX with SFP connector. With built-in SNMP and Web-based management, the network administrator can monitor, configure and control the activity of each 802.3ah series card and remotely connected OAM compliant converter.

The FRM220-1000E(s)-1 is a copper to fiber Gigabit Ethernet solution designed to make conversion between 10/100/1000Base-TX and 1000Base-SX/LX with SC or SFP LC connector. With SNMP and Web-based management in the FRM220, the Network administrator can monitor, configure and control the activity of each card in the chassis.

The FRM220-1000EDS is a dual channel (two in one) copper to fiber Gigabit Ethernet solution designed to make conversion between 10/100/1000Base-TX and 1000Base-SX/LX with SFP connector.

The FRM220-1000TS is a transparent Gigabit Ethernet 1000Base-T to 1000Base-SX/LX SFP converter. They are managed (when installed in FRM220 with NMC) or non-managed stand-alone media converters, which give you the options to choose from a wide range of industry standard SFP modules with LC connectors.

The FRM220-10/100A is an IEEE802.3ah OAM compliant copper to fiber Fast Ethernet solution designed to make conversion between 10/100Base-TX and 100Base-FX with SC, FC or ST connector.