CTC Union Technologies Co., Inc.

G703/64-RM
Product image: G703/64-RM

Description The G703/64-RM is a Rack Type ITU-T G.703/64K Interface Converter for network access which is nested in a shelf and provides an economic solution for central site operators. There are 13 slots available for G703/64-RM cards for installation into the G703/64-RM rack. An optional SNMP card can be installed into the last slot for configuration and management. The SNMP card provides both local control via an RS-232 craft port and remote management using industry standard SNMP protocol via an Ethernet 10Base-T connection. The G703/64-RM allows full conversion between G.703 64Kbps services and a number of Data Port Interfaces including ITU-T V.35, X.21, RS-530, RS-449 and EIA RS-232. The G703/64-RM is very easy to implement. Simply apply the appropriate interface settings and configure the required timing for translation via DIP switches on the line card, then select the proper adapter cable to match the interface settings. This model features full compliance with all the relevant ITU & EIA standards under 64Kbps network environments with high reliability and may be used widely in the ISDN, DDN, and Packet Switching Networks. The G703/64-RM is also useful for data terminals which access PCM, 64Kbps digital channels, as well as digital microwave channels. Additionally, the G703/64-RM may be connected to Satellite Communication Channels such as SPAR series.

Features

All Interface connectors are on the rear panel
Central HUB Solution in a Standard 19" Rack
Console port allows terminal to setup and monitor operation locally. (available W/SNMP option)
Data Port provides 10 bit FIFO
Diagnostics: local and remote analog and local digital loopback
Fully transparent signal conversion
High density & compact design in a 4U high rack
Hot Swapping of cards supported
LED Line status display on each card
Optional power card for power sharing
Optional SNMP network management system card
Selectable timing modes: recovery, transparent, dataport or internal OSC
Supports Interface for V.35, X.21, RS-530, RS-449 and RS-232
Up to 13 I/O cards may be installed

Ordering Information